Cell phones work by sending signals to (and receiving them from) nearby cell towers (base stations) using RF waves. This is a form of electromagnetic energy that falls between FM radio waves and microwaves. Like FM radio waves, microwaves, visible light, and heat, RF waves are a form of non-ionizing radiation. They don’t have enough energy to cause cancer by directly damaging the DNA inside cells. RF waves are different from stronger (ionizing) types of radiation such as x-rays, gamma rays, and ultraviolet (UV) light, which can break the chemical bonds in DNA.
*SAR values are from tests conducted by Pong Research Corp on March 29, 2012 and submitted to the FCC on May 31, 2012. Because the SAR values were submitted to the FCC in graph form, EWG estimated numerical SAR values based on the chart available in WT Docket 11-186 (http://apps.fcc.gov/ecfs/document/view?id=7021921006). Pong’s filing to the FCC did not indicate whether SAR measurements were done at the head or in a body-worn configuration. In a personal communication, Pong informed EWG that the SAR measurements were done in a body-worn configuration, with the same distance from the test mannequin used by the phone manufacturer. Tests in the body-worn configuration were done at a 10 millimeter separation distance.
Since speaking with Samet, further details came out from a large study that beamed high levels of phone radiation at rats and mice. While there remain quirks in the findings, the latest evidence still doesn’t find a link between phone radiation and cancer. In response, the FDA said, “Taken together, all of this research ... [has] given us the confidence that the current safety limits for cell phone radiation remain acceptable for protecting the public health.”
Cellsafe backs its claims by publishing independent test results on its site. These test reports are detailed, complex and confusing, but the results are available for you to interpret. For example, their tests found that an iPhone 4S produced a SAR of 1.069 W/kg on the 3G 2100Mhz frequency without a case, and 0.267 W/kg with a Cellsafe case. But what in the world does that actually mean? Is a SAR of 1 W/kg dangerous? Is a reduction to 0.267 W/kg actually better, or are we just splitting hairs?
For those of you who experience (or want to prevent) ES symptoms in your hands when using a computer keyboard, laptop, cell phone or other electronic devices, these gloves form a conductive enclosure and effectively shield radiowaves and electric fields. Soft, light weight, with ribbed cuff, and offering good tactile sensitivity. Polyester fiber is twisted with pure Silver fibers, then knit into a stretchy glove shape in basic gray color. Each glove has a 1.7 mm snap for a ground cord. Fully hand washable and tested for 50 cycles with no appreciable loss of conductivity. All fibers are conductive, achieving resistivity of less than 10 Ohm/sq. These gloves are also used in industry for static control when working with delicate static sensitive components and can even be used for TENS applications. Grounding is not necessary for Faraday Cage shielding effect, but is necessary for static control. Also useful on touch screens like an iGlove. We do not have the ground cord which fits this snap on these gloves. Shielded Gloves:
Well, Loyd really does seems like a guy with great intentions! However, he has put too much faith in Pong’s SAR testing, and SAR guidelines in general — to the point he no-longer believes his own eye’s when nothing is observed on his trusty RF meter. Which proves (Using an RF Meter) there is absolutely no real reduction in actual radiation coming from the front of the phone when a pong cell phone case is used.
Lab studies: Lab studies usually expose animals to something like RF energy to see if it causes tumors or other health problems. Researchers might also expose normal cells in a lab dish to RF energy to see if it causes the types of changes that are seen in cancer cells. It’s not always clear if the results from these types of studies will apply to humans, but lab studies allow researchers to carefully control for other factors that might affect the results and to answer some basic science questions.
Open the “Step 1” packet and use the specially treated alcohol wipe to gently clean the glass surface and the back-glass section of the camera. If you have a phone with a glass back like the new iPhones, you can use this on both sides of the glass.Make sure all areas are clean and use until the cloth liquid has evaporated. Then you should use the soft microfiber to dry the glass before you go to step 2.
But not everyone is unconcerned. In May 2015, a group of 190 independent scientists from 39 countries, who in total have written more than 2,000 papers on the topic, called on the United Nations, the World Health Organization, and national governments to develop stricter controls on cell-phone radiation. They point to growing research—as well as the classification of cell-phone radiation as a possible carcinogen in 2011 by the International Agency for Research on Cancer, part of the WHO—suggesting that the low levels of radiation from cell phones could have potentially cancer-causing effects.
The energy of electromagnetic radiation is determined by its frequency; ionizing radiation is high frequency, and therefore high energy, whereas non-ionizing radiation is low frequency, and therefore low energy. The NCI fact sheet Electromagnetic Fields and Cancer lists sources of radiofrequency radiation. More information about ionizing radiation can be found on the Radiation page.