Take a closer look at the product claims. Many refer to their “shielding technology” and not the product itself. In many cases, the “FCC Certified” labs they cite are actually testing how much RF the raw shielding material can block. They’re testing the materials used in the products. They’re not testing how much RF the actual products block while on a real-world phone.
A carrier wave oscillates at 1900 megahertz (MHz) in most phones, which is mostly invisible to our biological tissue and doesn’t do damage. The information-carrying secondary wave necessary to interpret voice or data is the problem, says Dr. Carlo. That wave cycles in a hertz (Hz) range familiar to the body. Your heart, for example, beats at two cycles per second, or two Hz. Our bodies recognize the information-carrying wave as an “invader,” setting in place protective biochemical reactions that alter physiology and cause biological problems that include intracellular free-radical buildup, leakage in the blood-brain barrier, genetic damage, disruption of intercellular communication, and an increase in the risk of tumors. The health dangers of recognizing the signal, therefore, aren’t from direct damage, but rather are due to the biochemical responses in the cell.
The effect of mobile phone radiation on human health is a subject of interest and study worldwide, as a result of the enormous increase in mobile phone usage throughout the world. As of 2015, there were 7.4 billion subscriptions worldwide, though the actual number of users is lower as many users own more than one mobile phone. Mobile phones use electromagnetic radiation in the microwave range (450–3800 MHz and 24-80GHz in 5G mobile). Other digital wireless systems, such as data communication networks, produce similar radiation.
So, what types of RF are these cases intended to block? If they block the frequency being used by the phone than if the blocking is complete the phone won’t work. If it’s partial than, as noted by the FCC and related in the article, the phone may attempt to compensate for the weakened signal by increasing it’s signal strength, thereby emitting higher levels of radiation itself, and reducing battery life in the process.
Participation bias, which can happen when people who are diagnosed with brain tumors are more likely than healthy people (known as controls) to enroll in a research study. Also, controls who did not or rarely used cell phones were less likely to participate in the Interphone study than controls who used cell phones regularly. For example, the Interphone study reported participation rates of 78% for meningioma patients (range among the individual studies 56–92%), 64% for glioma patients (range 36–92%), and 53% for control subjects (range 42–74%) (6).
A few other health concerns have been raised about cell phone use. One has been whether the RF waves from cell phones might interfere with medical devices such as heart pacemakers. According to the FDA, cell phones should not pose a major risk for the vast majority of pacemaker wearers. Still, people with pacemakers may want to take some simple precautions to help ensure that their cell phones don’t cause a problem, such as not putting the phone in a shirt pocket close to the pacemaker.
Safe Cell was successfully tested by an Independent laboratory. The Shielding Effectiveness test as a cell phone radiation protection shield, was conducted by The California Institute of Material Sciences which results proved that "Safe Cell possesses Shielding Effectiveness in the cell phone test frequency range 0.800 GHz to 10.525 GHz". (click here to view the full test report)
Of course, scientific seesawing like that doesn’t provide a lot of clarity or confidence for the 90 percent of American adults and roughly 80 percent of teens who report having a cell phone. So how concerned should you be about cell-phone radiation? Consumer Reports’ health and safety experts conducted a thorough review of the research and offer some guidance.
To check for radiowave emissions, use an RF meter with Near Field antenna. Again, position the antenna loop on the phone (because the entire antenna stem has some sensitivity, it is best to position the entire antenna over the area that will be shielded). Note carefully where the loop is positioned. Make a call and watch the readings. Notice the highest and lowest readings, and make a mental note of the "average" reading. Now, insert the shield, and repeat.
Hi Ty. I’m an EHS sufferer so now I try to live as free from technology as possible. My landline is connected with a cable, my router is linked to my desktop with a cable. My cell phone just does texts and calls and is switched off 99% of the time. My car is an old Skoda with no Sat Nav, no blue tooth technology and I have an earthing strap running off the rear chassis to remove the EMF’s to earth. At night I dump the power upstairs off along with the lighting circuit, I sleep on an organic mattress with no springs – so no aeril effect attracting EMFs whilst I sleep. Even the alarm clock is a wind up and with black out curtains I get the best sleep ever. Living in a mid terrace house can be a problem but Y-Sheilding both walls has blocked the majority of the neighbours harmful radiation. Guess what, no more EHS symptons.
These stick on “blockers” don’t work. I am EHS and can tell you with certainty (because I feel the fields) that they are not blocking anything. You must use substantial materials like those used in faraday cages (silver and copper), which are now manufactured in materials and fabrics, or avoid EMF use period. Just look at military use for example. They are not using stick on blockers. Follow Ty’s advice for minimizing and avoiding EMF, and look up EMF blocking fabrics, building materials, etc… for the real blockers.
We did not simply measure energy coming from the front of the case which is the area of the case where the phone would be "shielded" from radiation. If we had taken readings with a directional meter, specifically measuring energy coming from only the front or flap cover where the shielding material is, we assume as the manufacturers claim, that we would have seen a drop in the radiation readings.
We’re also exposed to radio-frequency radiation from the networks that connect our phones. And while the coming rollout of 5G, or fifth-generation, wireless networks is expected to transmit data faster than ever, it will also increase the number of antennas sending signals to mobile devices, and potentially our exposure to radiation, with unclear health effects.
SafeSleeve products are not tested by an FCC-approved lab. They have grossly mislead consumers. They only had tested one piece of material they claim is in their products. The consumer is given no proof that any of SafeSleeve products reduce any type of radiation. Do not bother testing their products with an RF meter because accurate testing requires a special lab that costs thousands of dollars. That’s why SafeSleeve has never had their products tested.
The government, however, does not require phone manufacturers to consider the effect of cases when they conduct compliance tests to meet the FCC’s allowable radiation exposure limits. The significance of this omission was underscored by tests commissioned by case-maker Pong Research and submitted to the FCC in May 2012. Those tests showed that three models of cases made by competing companies and used with an iPhone4 increased the phones’ Specific Absorption Rate, or SAR – the amount of radiation absorbed by the user’s body – by 20-to-70 percent (Table 1).
Don’t be mislead by a common misconception started in the 90′s that wired headsets, that the headset that came with your cell phone is a safe alternative to placing a phone to your head. This is simply not true at all! Ordinary headsets use a wire to deliver sound to an electronic earpiece that can deliver electromagnetic radiation into your head directly through your ear canal.
As far as which of those match your device, that really depends on your carrier. AT&T, Verizon, Sprint, and T-Mobile all have different frequencies. To further complicate things, in one geographic region of the country they may use one frequency, while another is used elsewhere. It all depends on which FCC licenses they have the rights to in each region.
The FCC provides information about the specific absorption rate (SAR) of cell phones produced and marketed within the last 1 to 2 years. The SAR corresponds with the relative amount of radiofrequency radiation absorbed by the head of a cell phone user (47). Consumers can access this information using the phone’s FCC ID number, which is usually located on the case of the phone, and the FCC’s ID search form.
There is no strong or consistent evidence that mobile phone use increases the risk of getting brain cancer or other head tumors. The United States National Cancer Institute points out that "Radiofrequency energy, unlike ionizing radiation, does not cause DNA damage that can lead to cancer. Its only consistently observed biological effect in humans is tissue heating. In animal studies, it has not been found to cause cancer or to enhance the cancer-causing effects of known chemical carcinogens." The majority of human studies have failed to find a link between cell phone use and cancer. In 2011 a World Health Organization working group classified cell phone use as "possibly carcinogenic to humans". The CDC states that no scientific evidence definitively answers whether cell phone use causes cancer.
Today’s report, the final one, was about a decade in the making and is the last of several versions that have been released since preliminary results were presented in May 2016. It represents the consensus of NTP scientists and a group of external reviewers, according to the release. In the future, the NTP plans to conduct studies in smaller exposure chambers and to use biomarkers such as DNA damage to gauge cancer risk. These changes in the experimental setup should mean that future studies will take less time.
The guidelines created a measure of the rate that body tissue absorbs radiation during cell phone use called the specific absorption rate (SAR). The SAR for cell phone radiation was set at a maximum of 1.6 watts of energy absorbed per kilogram of body weight. The limit was set due to the thermal effects of cell phone radiation (all RF radiation can heat human body tissue at high enough levels) - it was not set to mitigate other biological effects cell phone radiation might have such as DNA damage or cancer.
Unfortunately, regulatory boards do not require third-party phone accessory manufacturers to consider how their product will work in tandem with the smartphone. Neither do governments require smartphone manufacturers to conduct extensive research on whether their SAR will still meet the FCC’s allowable radiation exposure limits when their devices are using a phone case or other 3rd party accessories.
"To expect relief from radiation exposure from one specific device, is nearly impossible. It’s crucial to weigh in the MANY environmental factors; such as, temperature, atmospheric pressure, other radio waves, emissions from other devices, energy shifts from others around you, and Schumann Resonance shifts. Therefore," he explains that “relying on alteration of the environment as a safety precaution is always a game of chance…and signals affect people differently,” which adds another variables in the game of chance.
The device comes in a variety of forms ranging from the $39 Aries Shield ("a silicon based micro processor that ... decomposes oscillations of electromagnetic fields") to the $249 Aires Defender Utility (which "has two next generation 9 core silicon based micro processor (sic) that provide universal protection from electromagnetic smog of the broadband frequencies").
Today, the computer and phone have merged into one device that fits in the palm of your hand. A smartphone is essentially a small computer, yet has many times the computing power of traditional computers. There are no cords to connect you to a base. When turned on in your pocket or being used against your head, the cell phone touches some of the most sensitive parts of the body. Although the cell phone produces lower levels of radiation then past computers, they are now used much closer to the body and for longer periods of time, thus creating more health risks than in the past.
Limit your (and your children’s) cell phone use. This is one of the most obvious ways to limit your exposure to RF waves from cell phones. You may want to use your cell phone only for shorter conversations, or use it only when a conventional phone is not available. Parents who are concerned about their children’s exposure can limit how much time they spend on the phone.
Pong Research also makes cases for the iPad and its technology is arguably better suited for that. Why? Because serving as a stand to prop up your iPad or tablet, it means you don’t really need to hold it. That’s an ideal setup because higher amounts of radiation are going out the back, versus the front of the screen which you are touching with your fingers and palms.
“It’s quite informative that the NTP data found evidence of an increased tumor risk in the male rats for glial cells and in the [heart] Schwann cells,” said Joel Moskowitz, director of the Center for Family and Community Health at the Berkeley School of Public Health (who writes about electromagnetic radiation here). “That’s compelling evidence that what we’re seeing in humans — even though the signal is not clear — is highly suggestive, and that there is indeed something real going on with regard to tumor risk in humans.”
Mobile devices work by sending radio waves in the air. And while the National Cancer Institute has pointed out that the radio-frequency (RF) energy cell phone emits is low, it does not discount the possible long term health risks it poses. Some of the most recent smartphones (such as the iPhone 7 in particular), release a higher level of radiation than older cellphones; and with people spending more and more time on their devices, it’s only a matter of time before adverse effects might catch up.
When you need to get further from your headset, this extension does the trick. Three feet long, white, and very light weight. Has standard iPhone 3.5 mm, 3 band plug and socket. Simply plug one end into your iPhone, and plug your headset into the other end. You can daisy chain up to 4 extensions to get a total length of 12 feet if you need it! Available in black or white.
People can also reduce their exposure by limiting cell-phone use when the cellular signal is weak; when traveling in a high-speed car, bus or train; to stream audio or video; or to download or upload large files. All of these circumstances cause phones to put out higher-than-normal levels of RF energy. Phones also emit RF energy when connected to WiFi or Bluetooth devices, but at lower levels.
There’s a broad range of radiation types, and lots of harmless things emit radiation — like bananas, Brazil nuts, and granite countertops, according to Cincinnati Children’s Hospital. The type of radiation that comes out of our cellphones isn’t the same radiation that’s released by nuclear fallout or X-rays. Cellphone radiation, also known as radiofrequency radiation, is much weaker — so it can’t cause the same kind of cell damage that can lead to cancer.
In 2011, two small studies were published that examined brain glucose metabolism in people after they had used cell phones. The results were inconsistent; whereas one study showed increased glucose metabolism in the region of the brain close to the antenna compared with tissues on the opposite side of the brain (26), the other study (27) found reduced glucose metabolism on the side of the brain where the phone was used.