The International Agency for Research on Cancer (IARC) is part of the World Health Organization (WHO). Its major goal is to identify causes of cancer. The IARC has classified RF fields as “possibly carcinogenic to humans,” based on limited evidence of a possible increase in risk for brain tumors among cell phone users, and inadequate evidence for other types of cancer. (For more information on the IARC classification system, see Known and Probable Human Carcinogens.)
Radio base licensing procedures have been established in the majority of urban spaces regulated either at municipal/county, provincial/state or national level. Mobile telephone service providers are, in many regions, required to obtain construction licenses, provide certification of antenna emission levels and assure compliance to ICNIRP standards and/or to other environmental legislation.
Cell phones emit low levels of radio frequency energy (i.e., radio frequency radiation) in the microwave range while being used. It is well known that high levels of RF can produce biological damage through heating effects (this is how your microwave oven is able to cook food). However, it is not known to what extent or through what mechanism, lower levels of RF might cause adverse health effects as well. Several research studies have shown that the radio frequency radiation from wireless phone antennae “appears to cause genetic damage in human blood,” while another case study uncovered a “statistically significant increase” in neuro-epithelial brain tumors among cell phone users. Other research has shown little or no adverse effects. ABC’s 20/20 News (May 26, 2000) took the five most popular phones sold in the US and tested them at a highly respected German laboratory. Four out of the five phones tested were above the SAR limit. One thing is for certain, similar to the case of cigarette smoking, it will take several tests and many years before the effects of radio frequency radiation on the human body are known.
The following charts list SAR levels for the Apple iPhone, Samsung Galaxy S, as well as 20 of the highest SAR level cellphones and 20 of the lowest SAR level cellphones. The list provides the maximum possible SAR level from the phone (many phones have differing SAR levels depending on where and how the phone is used). If your phone is not on either list, you can find the SAR level for your specific phone by checking the online FCC database.
Some products (http://www.safecell.net/reports01.html for example) are tested using a piece of shielding material in a laboratory test jig. These tests legitimately show the amount of radiation which penetrates the shield, but results will be very different when compared to putting a small amount of the same shield on a large transmitter like a cellphone. Remember, the entire phone radiates. Placing a small amount of shielding, even if it is an effective shielding material, only shields that small area at best. Think about this analogy: no light will penetrate a penny as it is a very effective light shield, but it is silly to think that holding a penny up to the sun will put you in darkness.
SAR Shield was developed using the P.A.M. SYSTEM® technology. The materials used in the construction of the SAR Shield attract and dissipate electro-magnetic waves. As radiation travels it uses up its energy. What SAR Shield does is it acts like a radiation magnet, constantly attracting the radiation towards it, therefore making it release its energy closer to the phone. This causes most of the radiation to dissapate away from the head and body. SAR Shield does not cause noticeable reduction in signal strength.
Radiofrequency radiation is a form of electromagnetic radiation. Electromagnetic radiation can be categorized into two types: ionizing (e.g., x-rays, radon, and cosmic rays) and non-ionizing (e.g., radiofrequency and extremely low frequency, or power frequency). Electromagnetic radiation is defined according to its wavelength and frequency, which is the number of cycles of a wave that pass a reference point per second. Electromagnetic frequencies are described in units called hertz (Hz).