This was the best vegan EMR-blocking phone case .... I need to carry two IDs and four cards plus cash.. This was too much, so it started to split within months. Eventually it split to the point where my cards would all fall out if I tipped it the wrong way, so I had to put a rubber band on it. After that, the part that holds the phone started to slip so I have to jam it up before I can take a picture. And the case is looking worn. The upshot is that it lasted about a year. That's fine, I guess, but I would prefer something more durable.

As a rule, modern medical equipment is well protected against exposure to radiowave radiation. Therefore, there is generally no need for concern regarding the effects of mobile phones on the normal function of the equipment. Nevertheless, the Ministry of Health recommends not to have a mobile phone in the immediate proximity (a distance of 30-50 cm from the portable medical equipment or from medical equipment implanted in the patient's body).
"On the same [IARC] scale that said phone use was possibly carcinogenic, smoking is at the highest level. They are class 1 carcinogens; that's beyond doubt, they definitely do cause cancer ... There's an absolute difference between substances, where the evidence says that there is no doubt about the fact that they cause cancer, compared to mobile phones, where they say it is still possible because the data over ten years use still isn't in."

Moving the meter around the case, we detect readings on the side, back and front of the case. We use the multi-directional TES 593 meter which measures 10 MHz to 8GHz. We use the unit of micro-watts per square centimeter, which looks like this little symbol: μW/cm² and we use it on the max setting which shows the maximum measured value. In non-science speak: the highest level of RF we see, which could be from the back the side or the front. 
For those of you who experience (or want to prevent) ES symptoms in your hands when using a computer keyboard, laptop, cell phone or other electronic devices, these gloves form a conductive enclosure and effectively shield radiowaves and electric fields. Soft, light weight, with ribbed cuff, and offering good tactile sensitivity. Polyester fiber is twisted with pure Silver fibers, then knit into a stretchy glove shape in basic gray color. Each glove has a 1.7 mm snap for a ground cord. Fully hand washable and tested for 50 cycles with no appreciable loss of conductivity. All fibers are conductive, achieving resistivity of less than 10 Ohm/sq. These gloves are also used in industry for static control when working with delicate static sensitive components and can even be used for TENS applications. Grounding is not necessary for Faraday Cage shielding effect, but is necessary for static control. Also useful on touch screens like an iGlove. We do not have the ground cord which fits this snap on these gloves. Shielded Gloves:

I really want to caution you to be careful of any "expert" or EMF blogger recommending anti-radiation filtering cases, stickers that attach to the phone or necklaces to "ward off" EMF.  I get it, when I first realized 25 years ago that I was sensitive to electromagnetic energy and then later, when I understood that without a doubt, man made electromagnetic radiation has a biological effect on my body, I wanted an easy fix.  I tried the shielding materials and cases and I just did not feel any better.  Then I bought meters to see if the energy changed and I actually noticed what the California Department of Health now says and it's what the FTC and FCC post warnings about:  "Some shielding materials can make exposures worse". So please, be careful and read on for what you can do to avoid electromagnetic radiation exposure.
In 2011, researchers at the National Institutes of Health showed that low-level radiation from an activated cell phone held close to a human head could change the way certain brain cells functioned, even without raising body temperature. The study did not prove that the effect on brain cells was dangerous, only that radiation from cell phones could have a direct effect on human tissue.
Launched at the U.S. Food and Drug Administration’s request 10 years ago, the NTP study dosed rats and mice of both sexes with RF radiation at either 1.5, 3 or 6 watts of radiation per kilogram of body weight, or W/kg. The lowest dose is about the same as the Federal Communications Commission’s limit for public exposure from cell phones, which is 1.6 watts W/kg. The animals were exposed nine hours a day for two years (about the average life span for a rat), and the exposures were cranked up steadily as the animals grew, so the absorbed doses per unit body weight remained constant over time.

Only 0.010 inch thick, PaperSHIELD is flexible and can be easily cut with a scissors and shaped by hand into simple or very complex shapes. High saturation and moderate permeability make this ideal for shielding weak magnets, or stronger magnets with many layers of shielding. This material is particularly suited for achieving precise levels of partial shielding as you can add exactly the right number of layers to achieve the desired result. White paper on one side can be imprinted (by you). Peel and stick adhesive on the other side permits easy and semi-permanent mounting almost anywhere. Magnets will stick to it nicely.

The information provided on this site is for informational purposes only and is not intended as a substitute for advice from your physician or other health care professional or any information contained on or in any product label or packaging. You should not use the information on this site for diagnosis or treatment of any health problem or for prescription of any medication or other treatment. You should consult with a healthcare professional before starting any diet, exercise or supplementation program, before taking any medication, or if you have or suspect you might have a health problem. You should not stop taking any medication without first consulting your physician.
Some people might consider choosing a phone with a low SAR value. Different models of phones can give off different levels of RF waves. But as noted above, according to the FCC the SAR value is not always a good indicator of a person’s exposure to RF waves during normal cell phone use. One way to get information on the SAR level for a specific phone model is to visit the phone maker’s website. The FCC has links to some of these sites here: www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellular-telephones. If you know the FCC identification (ID) number for a phone model (which can often be found somewhere on the phone or in the user manual), you can also go to the following web address: www.fcc.gov/oet/ea/fccid. On this page, you will see instructions for entering the FCC ID number.
EWG urges the FCC to include third party-produced cases and accessories in its cell phone testing policies to ensure that they do not compromise cell phone function and do not prevent a cell phone from complying with the Commission’s exposure limits. Manufacturers should publish the radiation data for a given phone when used directly next to the body and when used with the cases most commonly sold for a specific model.
Generally, the Ministry of Health adopts the instructions of most international entities, recommending to follow the “precautionary principle” regarding mobile phone use. The instructions of the Ministry take into account the technological need of the population in Israel, along with the measure of precaution necessary according to the recent scientific information in order to balance between the population’s needs and the preservation of its health.
Your phone sends radiofrequency, or RF, waves from its antenna to nearby cell towers, and receives RF waves to its antenna from cell towers when you make a call or text or use data. The frequency of a cell phone’s RF waves falls between those emitted by FM radios and those from microwave ovens, all of which are considered “non-ionizing” forms of radiation. That means that—unlike radiation from a nuclear explosion, a CT scan, or a standard X-ray—the radiation from your phone does not carry enough energy to directly break or alter your DNA, which is one way that cancer can occur. (FM radios and microwaves don’t raise alarms, in part because they aren’t held close to your head when in use and because microwave ovens have shielding that offers protection.)
Anyway, several phone models that my wife and I considered buying emitted radiation levels simply too high for my comfort level. They’re measured in SAR -- “specific absorption rate” -- which is essentially the amount of radiation a human body will absorb from using or being near a cell phone. The lower the rate, the less radiation will be absorbed.
In one type of study, called a case–control study, cell phone use is compared between people with these types of tumors and people without them. In another type of study, called a cohort study, a large group of people who do not have cancer at study entry is followed over time and the rate of these tumors in people who did and didn’t use cell phones is compared. Cancer incidence data can also be analyzed over time to see if the rates of brain tumors changed in large populations during the time that cell phone use increased dramatically. These studies have not shown clear evidence of a relationship between cell phone use and cancer. However, researchers have reported some statistically significant associations for certain subgroups of people.
×