None of the three cases contain metallic parts, which are known to affect SAR, but all increased the user’s radiation exposure. The effect on radiation exposure would likely vary with each of the hundreds of cases on the market, and each would have to be tested individually to come up with an exact measure. The results in Table 1, however, are believed to reflect the range of radiation increases.
ShieldMe On the ShieldMe site is a message from Wireless Connection CEO Rose Vitale addressing issues with the cellphone industry and she makes some good points. As far as how ShieldMe works she states, " Our ShieldMe cases help deflect up to 99% of the harmful EMF, RF or microwave radiation emitted from a cellphone while carrying around or when on a call." The demonstration of the SheildMe case shows levels that like the "EMF protection cellphone cases" is many many times higher than levels EMF expert Larry Gust follows as a certified building biologist.
Some people might consider choosing a phone with a low SAR value. Different models of phones can give off different levels of RF waves. But as noted above, according to the FCC the SAR value is not always a good indicator of a person’s exposure to RF waves during normal cell phone use. One way to get information on the SAR level for a specific phone model is to visit the phone maker’s website. The FCC has links to some of these sites here: www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellular-telephones. If you know the FCC identification (ID) number for a phone model (which can often be found somewhere on the phone or in the user manual), you can also go to the following web address: www.fcc.gov/oet/ea/fccid. On this page, you will see instructions for entering the FCC ID number.
Most cellphone shielding products are designed to reduce radiation to the user while still allowing the phone to function. This means that some radiation can still get to the phone… and some radiation can still get out of the phone! But sometimes you need to completely kill the signal. The RF Kill Box is a full-metal shielding jacket with very high shielding performance.
Cell phones emit low levels of radio frequency energy (i.e., radio frequency radiation) in the microwave range while being used. It is well known that high levels of RF can produce biological damage through heating effects (this is how your microwave oven is able to cook food). However, it is not known to what extent or through what mechanism, lower levels of RF might cause adverse health effects as well. Several research studies have shown that the radio frequency radiation from wireless phone antennae “appears to cause genetic damage in human blood,” while another case study uncovered a “statistically significant increase” in neuro-epithelial brain tumors among cell phone users. Other research has shown little or no adverse effects. ABC’s 20/20 News (May 26, 2000) took the five most popular phones sold in the US and tested them at a highly respected German laboratory. Four out of the five phones tested were above the SAR limit. One thing is for certain, similar to the case of cigarette smoking, it will take several tests and many years before the effects of radio frequency radiation on the human body are known.
There’s no question that portable phones and computers offer many conveniences and have made our lives easier in countless ways. For many people this convenience outweighs the worry of EMFs. My hope is that by becoming aware of the sources and dangers of cell phone radiation and EMFs, you’ll take steps to minimize exposure for both you and your family.
Okay, so Antenna Search isn't really a device but it is a handy service that will tell you how close you are to cellular towers. I punched in my address and found there are SEVENTY-TWO cellular towers and antennas within a 4 mile radius. It lists all the details for each tower – owner, coordinates, installation date, etc. It's a really useful tool for finding out the surrounding risks.
Radiofrequency radiation is a form of electromagnetic radiation. Electromagnetic radiation can be categorized into two types: ionizing (e.g., x-rays, radon, and cosmic rays) and non-ionizing (e.g., radiofrequency and extremely low frequency, or power frequency). Electromagnetic radiation is defined according to its wavelength and frequency, which is the number of cycles of a wave that pass a reference point per second. Electromagnetic frequencies are described in units called hertz (Hz).