But not everyone is unconcerned. In May 2015, a group of 190 independent scientists from 39 countries, who in total have written more than 2,000 papers on the topic, called on the United Nations, the World Health Organization, and national governments to develop stricter controls on cell-phone radiation. They point to growing research—as well as the classification of cell-phone radiation as a possible carcinogen in 2011 by the International Agency for Research on Cancer, part of the WHO—suggesting that the low levels of radiation from cell phones could have potentially cancer-causing effects.
So, what types of RF are these cases intended to block? If they block the frequency being used by the phone than if the blocking is complete the phone won’t work. If it’s partial than, as noted by the FCC and related in the article, the phone may attempt to compensate for the weakened signal by increasing it’s signal strength, thereby emitting higher levels of radiation itself, and reducing battery life in the process.

*SAR values are from tests conducted by Pong Research Corp on March 29, 2012 and submitted to the FCC on May 31, 2012. Because the SAR values were submitted to the FCC in graph form, EWG estimated numerical SAR values based on the chart available in WT Docket 11-186 (http://apps.fcc.gov/ecfs/document/view?id=7021921006). Pong’s filing to the FCC did not indicate whether SAR measurements were done at the head or in a body-worn configuration. In a personal communication, Pong informed EWG that the SAR measurements were done in a body-worn configuration, with the same distance from the test mannequin used by the phone manufacturer. Tests in the body-worn configuration were done at a 10 millimeter separation distance.


Apple has designed the 3D touch screens on newer models of the iPhone such as iPhone 6S, iPhone 6S Plus, iPhone 7 and iPhone 7 Plus models to have adjustable screen sensitivity. If your phone is acting unexpectedly when closing the cover of your case, this can be easily solved by adjusting the sensitivity of the touchscreen in your phone settings. Go to Settings > General > Accessibility > 3D Touch. You can either turn this feature completely OFF or set the sensitivity slider to FIRM to make the the 3D touch screen less sensitive.
These stick on “blockers” don’t work. I am EHS and can tell you with certainty (because I feel the fields) that they are not blocking anything. You must use substantial materials like those used in faraday cages (silver and copper), which are now manufactured in materials and fabrics, or avoid EMF use period. Just look at military use for example. They are not using stick on blockers. Follow Ty’s advice for minimizing and avoiding EMF, and look up EMF blocking fabrics, building materials, etc… for the real blockers.

If not, then how can the seller claim that the reported effects on cell cultures, muscle strength testing, plants, skin heating, or other biological effects are due to electromagnetic changes (see http://www.cellphone-health.com/mret-howitworks.htm for example)? Electromagnetic field characteristics are well known and easy to measure. If there is truly an electromagnetic change, that change will be easy to detect and measure.


In 2011, two small studies were published that examined brain glucose metabolism in people after they had used cell phones. The results were inconsistent; whereas one study showed increased glucose metabolism in the region of the brain close to the antenna compared with tissues on the opposite side of the brain (26), the other study (27) found reduced glucose metabolism on the side of the brain where the phone was used.
Using the gauss meter at varied locations, you can easily detect electromagnetic radiation “hot spots” where exposure to these ominous frequencies is the greatest. Armed with this crucial information, you can then avoid these areas, re-arranging furniture or electronic devices as needed in order to avoid unnecessary exposure to electromagnetic radiation.

SafeSleeve - Unlike the competition, SafeSleeve anti-radiation cases for cell phone integrate FCC accredited lab tested shielding technology that can block over 99% of RF radiation and over 92% of ELF radiation. 360 degree phone protection and built-in RFID blocking wallet comes standard and all products are backed by our 30-day, hassle-free return policy. Free expedited shipping in the US and discounted international rates. Click below to order today!


When called to help with the cell phone issue, Dr. Carlo was working with the FDA on silicone breast implant research. The choice of Dr. Carlo to head WTR seemed unusual to industry observers. An epidemiologist whose expertise was in public health and how epidemic diseases affect the population, he appeared to lack any experience in researching the effects of EMR on human biology. Based on this, a premature conclusion was drawn by many: Dr. Carlo was an “expert” handpicked by the cell phone industry, and therefore his conclusions would only back up the industry’s claim that cell phones are safe.
It’s easy to call any case a product designed to block smartphone radiation.  What you need to look for is credible, quantifiable claims that highlight a case’s ability to reduce your exposure to the harmful radiation. Look for relevant  certifications from credible organizations (such as FCC accredited laboratories) that will vouch for product claims, and read product reviews online.
But manipulation by the industry had begun almost immediately at the start of research. While Dr. Carlo and his team had never defined their research as being done to prove the safety of cell phones, the industry internally defined it as an insurance policy to prove that phones were safe. From the outset, what was being said by the cell phone industry in public was different from what was being said by the scientists behind closed doors.
Don’t rely on a “radiation shield” or other products claiming to block RF energy, electromagnetic fields, or radiation from cell phones. According to the U.S. Federal Trade Commission, products that interfere with the phone’s signal may force it to work harder and emit more RF energy in order to stay connected, possibly increasing your exposure. It is best to use wired solutions to reduce RF rather than rely on an untested  product.
DefenderShield Cellphone Radiation Case also claims independent testing and says in their website: That a "sophisticated layering of separate non-toxic, human safe materials processed for maximum radiation blocking efficiency. Each material has unique and targeted radiation-shielding characteristics designed to work in unison to eliminate all radiation emissions from 0 to 10 GHZ and Defender Shield technology refracts, conducts and finally absorbs all these potentially harmful emissions."  In this demonstration, the radiation level measured when DefendeShield case was on is still quite a bit above the level of exposure that I would recommend. I personally do not recommend-holding a phone with a shielding case to your head as the DefenderShield website shows a young woman doing as she demonstrates the product. 
4. For the reasons mentioned in #3 above, an at-home meter test is extremely inaccurate and unreliable. That said, a far field RF meter such as the one you are using is highly influenced by ambient RF levels that exist almost everywhere. Again, we do not aim to eliminate the radiation from the device, nor from your surroundings, but our technology does deflect the radiation away from the body.
A cellular phone is basically a radio that sends signals on waves to a base station. The carrier signal generates two types of radiation fields: a near-field plume and a far-field plume. Living organisms, too, generate electromagnetic fields at the cellular, tissue, organ, and organism level; this is called the biofield. Both the near-field and far-field plumes from cell phones and in the environment can wreak havoc with the human biofield, and when the biofield is compromised in any way, says Dr. Carlo, so is metabolism and physiology.

Since 2001, the FCC has allowed manufacturers to test phones at a distance of up to one inch from the body to account for the use of a holster. In a 2012 report, however, the Government Accountability Office, the Congressional watchdog agency, noted that many cell phone owners actually keep and use their phones right next to the body, so these outdated testing policies could result in radiofrequency (RF) radiation exposure greater than the FCC’s legal limit (GAO 2012). The GAO report concluded:
A third requirement was for the FDA to create a formal interagency working group to oversee the work and provide input. The purpose of this was to alleviate any perception that the industry was paying for a result, not for the research itself. But the fourth and last requirement was considered by Dr. Carlo to be highly critical: “Everything needed to be done in sunlight. The media had to have access to everything we did.”

One of the most robust animal studies in the world comes from the US government. In 1999, during the Clinton administration, the Food and Drug Administration asked the National Toxicology Program (NTP) to study the toxicity and cancer-causing capability of cellphone radio-frequency radiation. At the time, health officials felt epidemiological studies in humans wouldn’t answer these questions, so the NTP embarked on studies in rats and mice.
One of the many advantages of TI22 is that after applying TI22 to your device it will have an invisible layer that will protect your device from harmful EMF radiation scratches and scuffs for up to one year. This layer reaches the full hardness of 9H on the Mohs scale of mineral hardness, which is a scale that characterizes scratch resistance, and is similar to Sapphire, Ruby or Corundum. Its almost as hard as a Diamond.
Just as inevitably, worries about brain cancer spawned a market for products that supposedly protect cell phone users. For $62, you can order a Delta Shield, a thin polyester patch that contains a microchip that allegedly renders cell phones harmless. Users are instructed to place the patch on their cell phone battery. The similar BIOPRO Cell Chip, sold online for $35, attaches to the outside of the phone. The penny-size WaveShield 2000 Gold, selling for about $25, fits on the earpiece.
The guidelines created a measure of the rate that body tissue absorbs radiation during cell phone use called the specific absorption rate (SAR). The SAR for cell phone radiation was set at a maximum of 1.6 watts of energy absorbed per kilogram of body weight. The limit was set due to the thermal effects of cell phone radiation (all RF radiation can heat human body tissue at high enough levels) - it was not set to mitigate other biological effects cell phone radiation might have such as DNA damage or cancer.
Like we talked about in the last section, SAR limits that are reported are the maximum possible radiation emitted from the device, however, this level is not what is common with the regular use of the device. Just because one cell phone has a higher maximum SAR level, doesn’t mean that the radiation level of normal use isn’t higher or lower than another device with a different maximum SAR level.
Radio base licensing procedures have been established in the majority of urban spaces regulated either at municipal/county, provincial/state or national level. Mobile telephone service providers are, in many regions, required to obtain construction licenses, provide certification of antenna emission levels and assure compliance to ICNIRP standards and/or to other environmental legislation.

The World Health Organization states that "A large number of studies have been performed over the last two decades to assess whether mobile phones pose a potential health risk. To date, no adverse health effects have been established as being caused by mobile phone use."[2] In a 2018 statement, the FDA said that "the current safety limits are set to include a 50-fold safety margin from observed effects of radiofrequency energy exposure".[3]
The NTP studied radiofrequency radiation (2G and 3G frequencies) in rats and mice (33, 34). This large project was conducted in highly specialized labs that specified and controlled sources of radiation and measured their effects. The rodents experienced whole-body exposures of 3, 6, or 9 watts per kilogram of body weight for 5 or 7 days per week for 18 hours per day in cycles of 10 minutes on, 10 minutes off. A research overview of the rodent studies, with links to the peer-review summary, is available on NTP website. The primary outcomes observed were a small number of cancers of Schwann cells in the heart and non-cancerous changes (hyperplasia) in the same tissues for male rats, but not female rats, nor in mice overall.
×