At high power levels, RF waves can heat up water molecules (which is how microwave ovens work). Scientists used to focus their concerns on the possibility that such heating of human tissue, which is mostly water, might damage cells. In fact, the FCC’s test of cell-phone emissions—which was set in 1996 and which all phones must pass before being allowed on the market—is based on that effect.

I can’t count how many times I’ve heard people speculate, joke, or jokingly speculate that their cellphone might be giving them cancer. It comes from a very reasonable place of discomfort — few people understand how radiation works, we put our phones right beside our brains all the time, and technology in general often feels like it ought to be causing some sort of societal ill.


Apple has designed the 3D touch screens on newer models of the iPhone such as iPhone 6S, iPhone 6S Plus, iPhone 7 and iPhone 7 Plus models to have adjustable screen sensitivity. If your phone is acting unexpectedly when closing the cover of your case, this can be easily solved by adjusting the sensitivity of the touchscreen in your phone settings. Go to Settings > General > Accessibility > 3D Touch. You can either turn this feature completely OFF or set the sensitivity slider to FIRM to make the the 3D touch screen less sensitive.
Some people might consider choosing a phone with a low SAR value. Different models of phones can give off different levels of RF waves. But as noted above, according to the FCC the SAR value is not always a good indicator of a person’s exposure to RF waves during normal cell phone use. One way to get information on the SAR level for a specific phone model is to visit the phone maker’s website. The FCC has links to some of these sites here: www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellular-telephones. If you know the FCC identification (ID) number for a phone model (which can often be found somewhere on the phone or in the user manual), you can also go to the following web address: www.fcc.gov/oet/ea/fccid. On this page, you will see instructions for entering the FCC ID number.
The pacemaker studies were a harbinger of bad things to come. Results showed that cell phones do indeed interfere with pacemakers, but moving the phone away from the pacemaker would correct the problem. Amazingly, the industry was extremely upset with the report, complaining that the researchers went off target. When Dr. Carlo and his colleagues published their findings in the New England Journal of Medicine in 1997,11 the industry promptly cut off funding for the overall program. It took nine months for the FDA and the industry to agree on a scaled-down version of the program to continue going forward. Dr. Carlo had volunteered to step down, since he was clearly not seeing eye-to-eye with the industry, but his contract was extended instead, as no one wanted to look bad from a public relations standpoint.
Some people might consider choosing a phone with a low SAR value. Different models of phones can give off different levels of RF waves. But as noted above, according to the FCC the SAR value is not always a good indicator of a person’s exposure to RF waves during normal cell phone use. One way to get information on the SAR level for a specific phone model is to visit the phone maker’s website. The FCC has links to some of these sites here: www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellular-telephones. If you know the FCC identification (ID) number for a phone model (which can often be found somewhere on the phone or in the user manual), you can also go to the following web address: www.fcc.gov/oet/ea/fccid. On this page, you will see instructions for entering the FCC ID number.
First, you must have a proper meter. To check for magnetic field emissions, an AC Gaussmeter will work. Most AC gaussmeters will have an internal probe. Simply position the gaussmeter on the phone. Note carefully where the meter is positioned. Make a call and watch the readings. Notice the highest and lowest readings, and make a mental note of the "average" reading. Now, insert the magnetic shield, and repeat.
They get upset to learn that the video game console requires them to use their hands to play it, and one exclaims “That’s a baby’s game!” I’m thinking “Whoa, I never want to be that dependent on technology that I don’t want to use my hands. I’ve heard many people say “my cell phone is my right arm, or I can’t live without my cell phone. How many of you recall the movie “Johnny Mnemonic(1995)” It was about the effect technology was having on the human body. Nerve Attenuation Syndrome (NAS)
4. For the reasons mentioned in #3 above, an at-home meter test is extremely inaccurate and unreliable. That said, a far field RF meter such as the one you are using is highly influenced by ambient RF levels that exist almost everywhere. Again, we do not aim to eliminate the radiation from the device, nor from your surroundings, but our technology does deflect the radiation away from the body.
It’s also possible that longer-term studies and cancer incidence tracking will find larger cancer effects in another five or 10 years — or that how we use cellphones is evolving such that the devices may cause cancer in ways these studies didn’t account for. (These days, many people text instead of talking, and hold their cellphones in their pockets but not on their heads and necks.) That’s why some people look to animal studies to supplement our understanding of the potential biological effects of cellphones.
A third requirement was for the FDA to create a formal interagency working group to oversee the work and provide input. The purpose of this was to alleviate any perception that the industry was paying for a result, not for the research itself. But the fourth and last requirement was considered by Dr. Carlo to be highly critical: “Everything needed to be done in sunlight. The media had to have access to everything we did.”

Dr. Carlo, wrote a  Medical Alert ten years ago. He cautioned people with EMF sensitivity against relying upon widely-available EMR Protection Products to prevent the effects of EMF exposure. He noted that EMF sensitive individuals were reporting the opposite effect: people found their symptoms and/or sensitivity worsened. Specifically, severe “symptom relapses.” Dr. Carlo noted:

So of course now that we understand that the cases are not tested and just the material--it makes sense! We measured power density levels all around the case-the shielding material most likely isn't used "all over" because then the phone couldn't receive signal and wouldn't be able to engage in a call.  That's why we did not see even close to a 99% reduction when some cases were on the phone.  In fact, watch the video and you'll see some readings are more than 20% higher with a case on vs the naked phone.


In March, however, a peer-review panel of 11 experts from industry and academia voted to advise the agency that it should raise the confidence level from “equivocal evidence” to “some evidence” of a link between cellphone radiation and brain tumors in male rats. (The female rats did not show evidence of a link between the radiation and such tumors.) Two panel members, Lydia Andrews-Jones of Allergan and Susan Felter of Procter & Gamble, proposed the risk upgrade.
Unfortunately, regulatory boards do not require third-party phone accessory manufacturers to consider how their product will work in tandem with the smartphone. Neither do governments require smartphone manufacturers to conduct extensive research on whether their SAR will still meet the FCC’s allowable radiation exposure limits when their devices are using a phone case or other 3rd party accessories.
"Partner Content" allows today's industry thought leaders to share their unique insight and perspective with the greater ASPENCORE audience. Material published as "Partner Content" was created by or on behalf of ASPENCORE's partner(s) in conjunction with the ASPENCORE Studio team and may not reflect the views of the site and editors to which it is published.For more information on this program, email support@aspencore.com

5. Use an EMF shielding device. A variety of holsters and other cell phone holders and shields are available that claim to block radiation. If you buy such a product, look to see if it has an SAR (specific absorption rate) value. You want a shielding device that blocks the majority of EMFs. (SAR is a measure of the rate at which energy is absorbed by a body exposed to EMFs.) 
There were no biological hypotheses tested in the study. It was therefore only a numbers game. Ignored were mechanisms of disease found in other studies of cell phone radiation effects, including genetic damage, blood-brain barrier leakage, and disrupted intercellular communication. The study did not discuss any research supporting the notion that cell phones could cause problems in users.
Specific Absorption Rate is an indicator of how much EMF radiation body tissue absorbs when you’re using a cell phone and is one way to measure and compare the harm of different devices. In this article, I wanted to provide a resource to compare and contrast the SAR levels of many popular phones and talk a bit about what Specific Absorption Rate is, and how we can use it.

These cases work by redirecting the electromagnetic radiation (EMR) that is produced by phones, away from the user. All phones produce EMR when connected to the mobile network, and the effect of this energy is measured as a Specific Absorption Rate, or SAR: a measurement describing the radiation absorbed by kilogram of tissue. Government regulations in Australia dictate that all phones in Australia must emit a SAR less than 2 W/kg under the worst case scenario, and while all phones comply, most modern phones emit, at most, only half of this safe level, or approximately 1 W/kg.
From the FCC website: "The FCC ID number is usually shown somewhere on the case of the phone or device. In many cases, you will have to remove the battery pack to find the number. Once you have the number proceed as follows. Go to the following Web address: www.fcc.gov/oet/ea/fccid. Once you are there... Enter the FCC ID number (in two parts as indicated: 'Grantee Code' is comprised of the first three characters, the 'Equipment Product Code' is the remainder of the FCC ID). Then click on 'Start Search.' The grant of equipment authorization for this particular ID number should appear. The highest SAR values reported in the equipment certification test data are usually included in the comments section of the grant of equipment certification."
I don’t understand why only the lab tests are accurate. I just purchases two SafeSleeve cases and tested them myself with the same meter they use on their website in the promotional video. I made sure there were no other electronics nearby and I had the meter at zero without the cell phone next to it. I did not get the results they show in the video. I tested the phone with and without the case and it did not make any difference. The meter was peaking no mater what, with the flap opened or closed. If the meter is picking up radiation through the case, then my head is too. SafeSleeve is willing to reimburse me for the cases, but I am concerned that this might be a case of false advertising.

Great article. I learned several things that I will put into use with my electronic technology. Thank you. There are numerous EMF/EMR blockers that you can stick on your cell phones, computers, (even microwave ovens for people who still use these). Each brand I’ve researched has the same goal but they’re all different. Are some brands more effective than others? If you can recommend some good brands, I would appreciate your advice. What are good features to look for when selecting the EMF blockers?
Unfortunately, however, we’ll probably never have an RCT on cellphones and cancer in humans. It’d be too difficult and too expensive to randomly assign particular levels of cellphone use to thousands of people and have them stick with those plans for enough time (we’re talking at least five years) to figure out whether certain types of phones or phone use patterns cause cancer to develop. That’s not to mention the fact it’d be nearly impossible to find a group of people willing to not use cellphones and then make sure they actually stick to their promise.
In December, 2006, an epidemiological study on cell phone dangers published in the Journal of the National Cancer Institute sent the media into a frenzy.10 Newspaper headlines blared: “Danish Study Shows Cell Phone Use is Safe,” while TV newscasters proclaimed, “Go ahead and talk all you want—it’s safe!” The news seemed to be a holiday gift for cell phone users. But unfortunately, it’s a flawed study, funded by the cell phone industry and designed to bring a positive result. The industry’s public relations machine is working in overdrive to assure that the study get top-billing in the media worldwide.

He believes the FDA should put out guidance based on the results of the rat studies. “I would think it would be irresponsible to not put out indications to the public,” Melnick says. “Maintain a distance from this device from your children. Don’t sleep with your phone near your head. Use wired headsets. This would be something that the agencies could do right now.”


The government’s policies must change. Cell phone users should make their voices heard to prompt the FCC and manufacturers of cell phones and cases to ensure that these accessories never increase and, to the extent possible, decrease, users’ radiation exposure. At minimum, the FCC must take cell phone cases into consideration when it updates its standards to ensure that the use of a case will not expose people to more radiation than its legal SAR limit.  
Our recommendation is to reduce your exposure from wireless sources. We advocate what’s referred to as the Precautionary Principle. Basically, this means that because there’s research, lots of it actually, saying the energy that powers our cellphones (RF radiation) could be causing health concerns like tumors and cancer. We ought to take care when using our cell phones and all devices that emit RF, using them mindfully.
Some people might consider choosing a phone with a low SAR value. Different models of phones can give off different levels of RF waves. But as noted above, according to the FCC the SAR value is not always a good indicator of a person’s exposure to RF waves during normal cell phone use. One way to get information on the SAR level for a specific phone model is to visit the phone maker’s website. The FCC has links to some of these sites here: www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellular-telephones. If you know the FCC identification (ID) number for a phone model (which can often be found somewhere on the phone or in the user manual), you can also go to the following web address: www.fcc.gov/oet/ea/fccid. On this page, you will see instructions for entering the FCC ID number.

We did not simply measure energy coming from the front of the case which is the area of the case where the phone would be "shielded" from radiation. If we had taken readings with a directional meter, specifically measuring energy coming from only the front or flap cover where the shielding material is, we assume as the manufacturers claim, that we would have seen a drop in the radiation readings.
Powerful shielding material lines the back of the holster and reflects up to 99% of cell phone radiation away from your body. It uses well established science– inside each holster is a layer of metalized high tech fabric that forms a barrier to EMF radiation. Just attach the holster to your belt and slip in your phone. The shield doesn’t alter the behavior of your phone, nor cause increased drain of your phone’s battery. The shielding simply blocks the radiation that would have otherwise been absorbed by your body and reflects it away. Lifetime mfr wty.

Cables can act as an antenna, especially if they pass close to a strong source of radiofrequency radiation. One study has suggested that if the cable of a hands free mic passes near the phone's antenna, it can pick up some radiation and transmit it to your ear. Our ferrite snap bead is designed to reduce RF radiation in the cable. Made in 2 halves, you simply press it around the hands free wire at any convenient location near the earpiece end. Couldn't be simpler. It is small and lightweight enough to be almost unnoticable, yet powerful enough (50 ohm impedence minimum) to control nasty radiation. These are brand new, top quality and will accommodate wires up to 5 mm (3/16 inch) in diameter. About 1 inch long, grey color. If you are concerned about radiation from your hands free ear mic, this is the answer. Useful from 200-1000 MHz.
The outside is made of a synthetic polyurethane that feels just like leather, although genuine leather will be available soon. The inside is made of a microfiber that won’t scratch the phone. The materials are also designed to protect your phone, should you drop it. Most importantly, an integrated FCC-certified lab tested radiation-shielding foil not only deflects and absorbs RF, ELF and Thermal radiation to greatly reduce your exposure, but it also blocks RFID signals, so that hackers cannot steal your credit card information by scanning it from afar. And no, the case will not affect phone or battery performance.
Radio base licensing procedures have been established in the majority of urban spaces regulated either at municipal/county, provincial/state or national level. Mobile telephone service providers are, in many regions, required to obtain construction licenses, provide certification of antenna emission levels and assure compliance to ICNIRP standards and/or to other environmental legislation.

If you want to use your phone for talking, then the idea is that you keep it flipped over the front of the screen – that way you’re blocking radiation on both the front and back. The speaker still works with the cover on, because there’s a small hole for that. The inevitable drawback of this is that you have to flip the cover open in order to access your keypad.


We also spoke to experts and searched government reports to try to find any other high-quality evidence that may not have been published in an academic database. We included the National Toxicology Program’s animal studies, since they are considered some of the most important animal research that was funded by the government to help answer the question of whether cellphones cause cancer. We also included research on the fertility effects of cellphone radiation, since that was a concern many researchers in the field had.

What the study showed: Most published analyses from this study have shown no statistically significant increases in brain or central nervous system cancers related to higher amounts of cell phone use. One analysis showed a statistically significant, although modest, increase in the risk of glioma among the small proportion of study participants who spent the most total time on cell phone calls. However, the researchers considered this finding inconclusive because they felt that the amount of use reported by some respondents was unlikely and because the participants who reported lower levels of use appeared to have a slightly reduced risk of brain cancer compared with people who did not use cell phones regularly (4–6).
×