If you want to measure the EMF radiation from your own phone, and know if EMF protection products are working, you should get a quality EMF meter. I highly recommend the new TriField TF2 (read my review) as it’s simple to use, lasts forever, is extremely accurate, and measures all three types of EMF radiation. If you’re looking for a low-cost EMF meter I really like the Meterk (read my review).
You are so correct Agogo. I purchased a Guass meter that measures EMF’s recently and the area where it shows the most waves and literally screams is when I move it close to the walls! The other place, believe it or not, is close to my electric clock in the bedroom. So, I move the clock away from the bed at night. And…I pull the plugs from the wall on my desk top computer at night also. Not much I can do about the walls except move my bed to the middle of the room…LOL
EMP Faraday Bags are designed to protect against damaging EMP current, static discharge, microwave transmission, RFID snooping and moisture damage. Protect your sensitive electronics (laptops, cellphones, iPads etc), precious memories (flash drives, floppy disks, tape recordings, etc) homeopathic remedies and medications, passports, credit cards and other devices from damage and spying. Could make all the difference if there is an EMP event or solar flare. Opening can be heat sealed with a hot iron for security reasons or long term storage. Manufacturer recommends that you “nest” items inside multiple layers of protection (double bagging) for best results.
As a result, stories about a single nuclear meltdown or possible link between cellphone radiation and cancer will be amplified much more than news about the nine people who probably died today in the US from distracted driving. “This possible health effect from radiation is pretty esoteric at this point. If there is anything there, it seems to me like it’s going to be very, very small,” says Kenneth R. Foster, a bioengineering professor at the University of Pennsylvania who has been investigating whether there are biological effects from radio waves since the 1970s. “Driving and texting, people get killed doing that — but it’s not a very exciting risk to worry about.”

The following charts list SAR levels for the Apple iPhone, Samsung Galaxy S, as well as 20 of the highest SAR level cellphones and 20 of the lowest SAR level cellphones. The list provides the maximum possible SAR level from the phone (many phones have differing SAR levels depending on where and how the phone is used). If your phone is not on either list, you can find the SAR level for your specific phone by checking the online FCC database.

Another animal study, in which rats were exposed 7 days per week for 19 hours per day to radiofrequency radiation at 0.001, 0.03, and 0.1 watts per kilogram of body weight was reported by investigators at the Italian Ramazzini Institute (35). Among the rats with the highest exposure levels, the researchers noted an increase in heart schwannomas in male rats and non-malignant Schwann cell growth in the heart in male and female rats. However, key details necessary for interpretation of the results were missing: exposure methods, other standard operating procedures, and nutritional/feeding aspects. The gaps in the report from the study raise questions that have not been resolved.


One of the studies reports that male rats exposed to very high levels of radiofrequency radiation grew tumors around their hearts. Female rats exposed to the radiation didn’t, and neither male nor female mice showed obvious health problems in a second study. Neither study turned up clear evidence that radiofrequency radiation causes brain tumors, although the researchers are continuing to investigate. The studies are drafts that haven’t yet been reviewed by outside scientists.
The Pong Case is easy to use and snaps on to activate two built in antenna that draw away radiation. Tests performed by Pong labs and Wired magazine show that Pong cases redirect energy from the face of the cell phone or tablet toward the back of the device, reducing absorption by 67%. While one might think this would interrupt reception, the opposite occurs and reception has actually been observed to increase up to 13%. It fits most major phone brands and Pong also makes a case for the iPad (however it works a little differently and diffuses the energy instead of redirecting). The products come with a 6 month warranty and a 60 day money back guarantee. For more information, visit their website or watch these videos.
In 2011, researchers at the National Institutes of Health showed that low-level radiation from an activated cell phone held close to a human head could change the way certain brain cells functioned, even without raising body temperature. The study did not prove that the effect on brain cells was dangerous, only that radiation from cell phones could have a direct effect on human tissue.

Then there is non-ionizing radiation, which encompasses the vast majority of light we are exposed to: visible light from lightbulbs, infrared light from an oven and from people, gigahertz light from our wifi, megahertz light to/from our cell phones, and radio waves hitting our car radio. They are not harmful in small doses because one photon does not have enough energy to ionize atoms and/or break apart molecules. In very large doses, non-ionizing radiation can be harmful. For example, a visible light laser with sufficient power (at least several hundred times more than a legal laser pointer) which is concentrated in a small enough spot will burn your skin and do worse things to your eye if it gets in there. And those of us who are old enough, remember the gerbil-in-a-microwave flash animations which went viral 17 years ago [1] as a humorous (but not exactly factual) representation of what would happen if you microwaved a live rodent.
I don't know why, but I recently had a concern about the fact I keep my smartphone in my pocket for a good part of the day. Was this a "smart" idea, or was there a potential problem with phone radiation? To address this concern, I searched for answers on the Internet. There were a lot of contraptions, many of which seemed to be too good to be true. The one that looked the most promising was Blocsock, not cheap at $24 for the high-end model with the pouch, but it did say it blocked 96% of the cell phone radiation from your body by having special radiation-blocking material on one side, with the side facing away from your body regular material so the phone could still communicate with the outside world. Cheap eBay knockoffs had material on both sides, meaning when you put your phone in them, your phone could't communicate with the outside world! Others did not have the testing results that assured how well the blocking material worked. There is a very detailed SAR test report validating the Blocsock, which I found at sustainablemobile.com. You can Google it. It is a very exhaustive testing report!
Safe Cell Technology is created out of unique material that is permanently encoded with specific signals or frequencies designed to interact with and change the quality of the electromagnetic field (EMF) emitting from cell phones. It converts the electromagnetic energy into low level infrared energy acting as a cell phone radiation protection shield drastically reducing the harmful effects of cell phone radiation.
Independently tested DefenderShield® technology uses a patent-pending sophisticated layering of separate non-toxic, human safe exotic materials processed for maximum radiation blocking efficiency. Each material has unique and targeted radiation shielding characteristics designed to work in unison to up to eliminate all radiation emissions from 0 to 10 GHz.
If not, then how can the seller claim that the reported effects on cell cultures, muscle strength testing, plants, skin heating, or other biological effects are due to electromagnetic changes (see http://www.cellphone-health.com/mret-howitworks.htm for example)? Electromagnetic field characteristics are well known and easy to measure. If there is truly an electromagnetic change, that change will be easy to detect and measure.

But the 5G signals are weaker at traveling long distances, and weaker signals mean we need more antennas to amplify, or strengthen, the 5G network. According to the New York Times, “Instead of relying on large towers placed far apart, the new signals will come from smaller equipment placed an average of 500 feet apart in neighborhoods and business districts.” They’ll also emit a different kind of higher-frequency radio waves, known as millimeter waves.
Use the speaker mode on the phone or a hands-free device such as a corded or cordless earpiece. This moves the antenna away from your head, which decreases the amount of RF waves that reach the head. Corded earpieces emit virtually no RF waves (although the phone itself still emits small amounts of RF waves that can reach parts of the body if close enough, such as on the waist or in a pocket). Bluetooth® earpieces have an SAR value of around 0.001 watts/kg (less than one thousandth the SAR limit for cell phones as set by the FDA and FCC).
Let’s say you are in class, or at the movies, and you don’t want your phone to ring. Slip it into the fully shielded slot. In this position, RF signals in or out will be reduced almost to zero, which is enough to stop the phone from ringing in most circumstances unless you have an especially good connection. You can also store chipped cards (like credit cards) in here to prevent unintentional reading.

To check for radiowave emissions, use an RF meter with Near Field antenna. Again, position the antenna loop on the phone (because the entire antenna stem has some sensitivity, it is best to position the entire antenna over the area that will be shielded). Note carefully where the loop is positioned. Make a call and watch the readings. Notice the highest and lowest readings, and make a mental note of the "average" reading. Now, insert the shield, and repeat.
"Partner Content" allows today's industry thought leaders to share their unique insight and perspective with the greater ASPENCORE audience. Material published as "Partner Content" was created by or on behalf of ASPENCORE's partner(s) in conjunction with the ASPENCORE Studio team and may not reflect the views of the site and editors to which it is published.For more information on this program, email support@aspencore.com
All cell phones emit Electromagnetic Radiation (EMR). Most people are aware of Radio Frequency (RF) (also known as Microwave) signals that connect your cell phone to a cell tower, a WiFi router and Bluetooth devices. These cell phone signals are always on. But did you know that cell phones also emit Extremely Low Frequency (ELF) radiation produced by the cell phone’s internal components?
Over time, the number of cell phone calls per day, the length of each call, and the amount of time people use cell phones have increased. Because of changes in cell phone technology and increases in the number of base stations for transmitting wireless signals, the exposure from cell phone use—power output—has changed, mostly lowered, in many regions of the United States (1).
×