A study by the Corporate EME Research Laboratory and Motorola Florida Research Laboratories tested 9 different cell phone radiation shields, 5 of which claimed to block 99% of cell phone radiation. The other 4 shields tested claimed to emit a reverse radiation that would cancel out the harmful radiation from cell phones. The study found that all of the radiation shields had no effect on the amount of radiofrequency radiation a cell phone user is exposed to from their phone.[2]
Some scientists have reported that the RF waves from cell phones produce effects in human cells (in lab dishes) that might possibly help tumors grow. However, several studies in rats and mice have looked at whether RF energy might promote the development of tumors caused by other known carcinogens (cancer-causing agents). These studies did not find evidence of tumor promotion.
Researchers need funding to move fast to study the potential health effects of 5G networks and how they might change our exposures to radiation. “So far, we’ve got research that’s done on 3G and 4G but not 5G,” said Brawley of the American Cancer Society. “We do think the answers [about cell radiation’s cancer effects] for 5G may be different from the answers for 4G or 3G. ... As these types of radio waves and energy change over time, the answers [about their health effects] may change.”
This is the second Cell Shield protector I have purchased. I have had one for my cell phone for almost a year now and it has been wonderful! When my husband upgraded to a new phone, I knew I needed to purchase one for him. The application of the button is very simple and it stays on well. Due to the fact that it is a 'raised' button (a few millimeters thick), some may find it difficult to know where to apply it. I have an i4 phone with an Otterbox case. There is a round cut-out hole in the case that lines up with the 'apple' symbol on the back of the phone. I was able to place the button in that cut-out and it lines up flush with the cover. I highly recommend this Protector to anyone looking to significantly and effectively block EMF's.
In 1993, the cell phone industry was pressured by Congress to invest $28 million into studying cell phone safety. The cause of this sudden concern was massive publicity about a lawsuit filed by Florida businessman David Reynard against cell phone manufacturer NEC. Reynard’s wife, Susan, died of a brain tumor, and he blamed cell phones for her death. Reynard revealed the suit to the public on the Larry King Live show, complete with dramatic x-rays showing the tumor close to where Susan held her cell phone to her head for hours each day.
Please research info supplied by Dr Patrick Flanagan on the One Radio Show last November? He said during the interview that Ferric Oxide Crystals have the same earth Schumann Resonance and can be easily and cheaply bought as Jewellers Rouge. You can simply add some to clear nail varnish and dot all your electricals with it. To neutralise a Smart Meter you should paint the wall in between. I know it works and within a few days of doing this plus painting stones and throwing them (gifting) in close prox of mobile masts black helicopters started harassing me!
INTEGRITY: Many manufactures claim near 100% EMF protection, referring to the radiation blocking material, NOT the protection you receive on a call. If you covered your whole phone with EMF blocking material, then you'd have no signal. Our EMF blocking material is used on the front cover only, providing you real EMF protection with no sacrifice in reception.
"On the same [IARC] scale that said phone use was possibly carcinogenic, smoking is at the highest level. They are class 1 carcinogens; that's beyond doubt, they definitely do cause cancer ... There's an absolute difference between substances, where the evidence says that there is no doubt about the fact that they cause cancer, compared to mobile phones, where they say it is still possible because the data over ten years use still isn't in."
A large, long-term study has been comparing all of the people in Denmark who had a cell phone subscription between 1982 and 1995 (about 400,000 people) to those without a subscription to look for a possible increase in brain tumors. The most recent update of the study followed people through 2007. Cell phone use, even for more than 13 years, was not linked with an increased risk of brain tumors, salivary gland tumors, or cancer overall, nor was there a link with any brain tumor subtypes or with tumors in any location within the brain.

In 2011, two small studies were published that examined brain glucose metabolism in people after they had used cell phones. The results were inconsistent; whereas one study showed increased glucose metabolism in the region of the brain close to the antenna compared with tissues on the opposite side of the brain (26), the other study (27) found reduced glucose metabolism on the side of the brain where the phone was used.
Cooper's prototype arrived on the market a decade later at the staggering price of $3,995. Designed by Rudy Krolopp, it was known as the Motorola DynaTAC 8000X, or simply "the brick.” Featuring 20 large buttons and a long rubber antenna, it measured about 11 inches high, weighed almost 2 pounds, provided one hour of battery life and could store 30 phone numbers.

Cell-phone designs have changed a lot since the studies described above were completed. For example, the antennas—where most of the radiation from cell phones is emitted—are no longer located outside of phones near the top, closest to your brain when you talk, but are inside the phone, and they can be toward the bottom. As a result, the antenna may not be held against your head when you’re on the phone. That’s important because when it comes to cell-phone radiation, every milli­meter counts: The strength of exposure drops dramatically as the distance from your body increases.
To check for radiowave emissions, use an RF meter with Near Field antenna. Again, position the antenna loop on the phone (because the entire antenna stem has some sensitivity, it is best to position the entire antenna over the area that will be shielded). Note carefully where the loop is positioned. Make a call and watch the readings. Notice the highest and lowest readings, and make a mental note of the "average" reading. Now, insert the shield, and repeat.
If you would like to reproduce some or all of this content, see Reuse of NCI Information for guidance about copyright and permissions. In the case of permitted digital reproduction, please credit the National Cancer Institute as the source and link to the original NCI product using the original product's title; e.g., “Cell Phones and Cancer Risk was originally published by the National Cancer Institute.”
Use the speaker mode on the phone or a hands-free device such as a corded or cordless earpiece. This moves the antenna away from your head, which decreases the amount of RF waves that reach the head. Corded earpieces emit virtually no RF waves (although the phone itself still emits small amounts of RF waves that can reach parts of the body if close enough, such as on the waist or in a pocket). Bluetooth® earpieces have an SAR value of around 0.001 watts/kg (less than one thousandth the SAR limit for cell phones as set by the FDA and FCC).
I don't know why, but I recently had a concern about the fact I keep my smartphone in my pocket for a good part of the day. Was this a "smart" idea, or was there a potential problem with phone radiation? To address this concern, I searched for answers on the Internet. There were a lot of contraptions, many of which seemed to be too good to be true. The one that looked the most promising was Blocsock, not cheap at $24 for the high-end model with the pouch, but it did say it blocked 96% of the cell phone radiation from your body by having special radiation-blocking material on one side, with the side facing away from your body regular material so the phone could still communicate with the outside world. Cheap eBay knockoffs had material on both sides, meaning when you put your phone in them, your phone could't communicate with the outside world! Others did not have the testing results that assured how well the blocking material worked. There is a very detailed SAR test report validating the Blocsock, which I found at sustainablemobile.com. You can Google it. It is a very exhaustive testing report!
We purchased a cell phone case directly from SafeSleeve. Once received, we attempted to determine how much radiation protection is actually possible from the product. What we learned is that NONE of the products SafeSleeve sells are actually tested by an FCC approved lab. Their advertising is very misleading! The testing results they use as "proof" that their products are tested was a single test done ONLY on a piece of material they claim is used inside their products. NONE OF THEIR PRODUCTS HAVE EVER BEEN TESTED BY AN FCC APPROVED TESTING LAB. We read the test report from SafeSleeve's website and called the testing lab listed on the report who verified this information. We also called an independent, FCC approved cell phone testing lab and they explained the same thing. We were informed that radiation comes from all sides and edges of a cell phone, so when you use the SafeSleeve cell phone case, you are NOT being protected. SafeSleeve cell phone cases offer you no more protection than using a cell phone without a case. To protect yourself from cell phone radiation, you still need to use hold the phone at least 6-8 inches from your body, use the speaker for conversations, text more than talk, and don't use or carry your cell phone against your body. We attempted to have the SafeSleeve cell phone case tested and were informed that to have it properly tested would require paying thousands of dollars in a lab equipped for such testing; using an RF meter or similar device to test a cell phone case will not provide meaningful or accurate results. If SafeSleeve were an honest company, they would have each of their products tested in an FCC approved lab, the same type of lab that cell phones are tested in. However, SafeSleeve is not willing to spend the money. If you don't believe us, call an FCC approved cell phone testing lab and ask a few questions. In the meantime, don't waste your money on SafeSleeve products. Note: SafeSleeve attempts to protect themselves by not listing any business phone number or business address on their website. Any questions/complaints you may have with SafeSleeve are strictly handled via email. They refused our request to speak to a "real person" regarding our questions or issues with their products. Does the word SCAM apply here? We think so.

One of the many advantages of TI22 is that after applying TI22 to your device it will have an invisible layer that will protect your device from harmful EMF radiation scratches and scuffs for up to one year. This layer reaches the full hardness of 9H on the Mohs scale of mineral hardness, which is a scale that characterizes scratch resistance, and is similar to Sapphire, Ruby or Corundum. Its almost as hard as a Diamond.

According to this sub-regulation, “a speakerphone is a device that enables use of the phone without holding it, providing that if the device is installed on the phone, the phone will be positioned in the vehicle in a stable manner that prevents it from falling”. For the regular mobile phone instrument in the vehicle, it is advisable to install an antenna outside the vehicle and not inside it, and to prefer wire connections between the phone and the speaker over use of a blue tooth.
The ultra thin (1mm) RadiCushion by Cellsafe slips into the cell phone case and redirects radiation away from the face of the phone. It's available in black or white but not recommended for use with aluminum or metallic cell phone cases. Test results show a SAR reduction of 96%. A slightly thicker (2mm) RadiCushion is available for iPad and iPad mini; it adheres to the back of the device and also provides SAR reductions of 96%. Visit their website for more information or watch this independent test which shows an 80% reduction and also compares it to the BlocSock:
Features an outstanding 38-pound puncture resistance. The multiple layer construction provides full protection against ESD, EMI/RFI and tribocharging. Because its moisture barrier performance exceeds foil laminates for low Moisture Vapor Transmission Rate (MVTR), particularly after flexing, whatever you place in the bag and seal properly is going to stay dry also! Does not provide magnetic shielding.

Among the hundreds of smartphone cases available for iPhone and a bevy of popular Android phones, there are some that claim to reduce the amount of radiation your body absorbs when you have the handset close to your body. Pong Research is a US brand that offers a range of products fitting this description, as is Cellsafe, a company based in Victoria, Australia.
The BlocSock is a small, 3”x5½”, lightweight case that's only designed for cell phones, not tablets or laptops. One side is a normal fabric to ensure reception. The other side has a rectangular, metallic mesh to shield RF radiation. It's recommended that you keep the side with the shielding material between the phone and your body. When making or receiving calls, keep the shielding between your head and the phone. It can also be moved into a smaller “kangaroo style” pouch during calls. It's effective, and tests show that it reduces RF exposure 96%. For more information, check out the SAR research test or watch this video.

ShieldMe  On the ShieldMe site is a message from Wireless Connection CEO Rose Vitale addressing issues with the cellphone industry and she makes some good points.  As far as how ShieldMe works she states, " Our ShieldMe cases help deflect up to 99% of the harmful EMF, RF or microwave radiation emitted from a cellphone while carrying around or when on a call." The demonstration of the SheildMe case shows levels that like the "EMF protection cellphone cases" is many many times higher than levels EMF expert Larry Gust follows as a certified building biologist.   


The European Union is currently running the Mobi-Kids, a case-control study in 14 countries, to better understand the effects of electromagnetic fields radiation on children and adolescents. One of the early publications from the project, looking at data on the use of wireless devices among 10- to 25-year-olds in France, found that kids are started to rely on these devices earlier and earlier in life. But the researchers are still analyzing the main results on any health impacts, and haven’t yet published their findings.
Could you please provide me with evidence that non-ionizing radiation is damaging to humans? In another post illustrating the threats of non-ionizing radiation you have said that this radiation is damaging to children, and link an article by the American Academy of Sleep Medicine. However, this linked page contains no mention of non-ionizing radiation, and instead suggests that children are simply addicted to use of mobile phones, thus using them instead of sleeping. You also provided a link to a PubChem page on the negative effects of this radiation, but this page appears to no longer exist.
Participation bias, which can happen when people who are diagnosed with brain tumors are more likely than healthy people (known as controls) to enroll in a research study. Also, controls who did not or rarely used cell phones were less likely to participate in the Interphone study than controls who used cell phones regularly. For example, the Interphone study reported participation rates of 78% for meningioma patients (range among the individual studies 56–92%), 64% for glioma patients (range 36–92%), and 53% for control subjects (range 42–74%) (6).
×