Specific Absorption Rate (SAR) is an indicator for calculating the level of radiation absorbed in the body. This indicator represents the rate of energy absorption by the tissue and is expressed in units of Watt/kg. The Consumer Protection Regulations (information on non-ionizing radiation from mobile phones) of 2002, stipulate the duty to label the product, specifying the radiation level of the phone’s model and the maximum permitted radiation level. This regulation allows to compare the emitted radiation level between different instruments and to take this into consideration when weighing the factors determining the choice of a new instrument at the time of its purchase.
Whether you call them cell phones, smart phones or mobile devices, it seems like everyone has one. According to the wireless telecommunications industry, the U.S. now has an estimated 300 million mobile subscribers, compared to 110 million subscribers a decade ago. The increase in cell phone use has generated concern about possible health risks related to radiofrequency electromagnetic fields from this technology, and a market for shields as possible protection against the radio waves the phones emit. The Federal Trade Commission (FTC), the nation's consumer protection agency, has some practical tips to help you avoid scams and limit your exposure to electromagnetic emissions from your cell phone.

The Working Group indicated that, although the human studies were susceptible to bias, the findings could not be dismissed as reflecting bias alone, and that a causal interpretation could not be excluded. The Working Group noted that any interpretation of the evidence should also consider that the observed associations could reflect chance, bias, or confounding rather than an underlying causal effect. In addition, the Working Group stated that the investigation of risk of cancer of the brain associated with cell phone use poses complex methodologic challenges in the conduct of the research and in the analysis and interpretation of findings.
Since use of mobile phones by children began at a later stage compared to use by adults, the effects of exposure to mobile phones in this population have not yet been investigated. Considering their health sensitivity, the long life expectancy in the young population (probably involving the accumulation of significant exposure and development of morbidity in the long-run), and ethical issues involved in decision making regarding the population of minors, additional precaution is required in this population. Therefore, the Ministry of Health advises parents to reduce children’s exposure to mobile phones as much as possible, consider the age they start using them, reduce the amount of time mobile phones are used, and in any event, make sure they use earphones (not wireless) or a speaker when using the mobile phone.
However, there have been some studies that have shown that rats can develop a specific type of brain tumor, called a schwannoma, if they're subjected to prolonged radiofrequency radiation. These studies examined thousands of rats and mice, and exposed them to a variety of radiations — everything from "near-field" (which is what you get holding a phone to your ear) to "far-field" (which is what you get walking through everyone's Wi-Fi signals at Starbucks).
Homeopathic remedies, credit cards and passports with chips, and electronic equipment can all be compromised by exposure to electromagnetic fields. The EMP Can™ is a great air-tight way to store these items and protect them from outside EMF influences including low grade EMP. Shields both radiofrequency and magnetic fields by 95% or more. All metal construction, nice wide mouth and quick-close latch keep contents secure.
We used a few measuring devices to test and see if this product actually blocks radiation and RFID, including a very sophisticated EMF reader. I am glad to say that this is actually a very effective way to reduce radiation. It is most effective on the front side, and when you have it closed and latched, there is very little exposure - only along the top, side and bottom opening.
And don’t get me started on the immersion headgear they are coming out with for gaming. Anyway, I figured I would get a cell phone eventually and use it just as a phone, no bells and whistles. However after this article and a podcast on privacy, where I learned your cell phone is a tracking device, this goes to the towers, I’ve decided on a Definite no.
The information provided on this site is for informational purposes only and is not intended as a substitute for advice from your physician or other health care professional or any information contained on or in any product label or packaging. You should not use the information on this site for diagnosis or treatment of any health problem or for prescription of any medication or other treatment. You should consult with a healthcare professional before starting any diet, exercise or supplementation program, before taking any medication, or if you have or suspect you might have a health problem. You should not stop taking any medication without first consulting your physician.

Specific Absorption Rate (SAR) is an indicator for calculating the level of radiation absorbed in the body. This indicator represents the rate of energy absorption by the tissue and is expressed in units of Watt/kg. The Consumer Protection Regulations (information on non-ionizing radiation from mobile phones) of 2002, stipulate the duty to label the product, specifying the radiation level of the phone’s model and the maximum permitted radiation level. This regulation allows to compare the emitted radiation level between different instruments and to take this into consideration when weighing the factors determining the choice of a new instrument at the time of its purchase.


4. For the reasons mentioned in #3 above, an at-home meter test is extremely inaccurate and unreliable. That said, a far field RF meter such as the one you are using is highly influenced by ambient RF levels that exist almost everywhere. Again, we do not aim to eliminate the radiation from the device, nor from your surroundings, but our technology does deflect the radiation away from the body.
* This specification establishes the requirements for heat-sealable, electrostatic protective, flexible barrier materials used for the military packaging of microcircuits, sensitive semiconductor devices, sensitive resistors, and associated higher assemblies. In addition, the type I materials provide for water vapor-proof protection and attenuation of electromagnetic radiation.

In 2015, the European Commission Scientific Committee on Emerging and Newly Identified Health Risks concluded that, overall, the epidemiologic studies on cell phone radiofrequency electromagnetic radiation exposure do not show an increased risk of brain tumors or of other cancers of the head and neck region (2). The Committee also stated that epidemiologic studies do not indicate increased risk for other malignant diseases, including childhood cancer (2).


Using a speaker/personal speakerphone or earplug (not wireless) during conversation - distancing the mobile phone from the user’s body reduces his exposure to the radiowave radiation. Therefore, keep the mobile phone at a distance from the body (do not carry it on the body, such as in the belt, pocket or on a neck strap). Obviously, reducing the amount and duration of calls on the mobile phone is another simple measure to reduce exposure.
Let’s say you are in class, or at the movies, and you don’t want your phone to ring. Slip it into the fully shielded slot. In this position, RF signals in or out will be reduced almost to zero, which is enough to stop the phone from ringing in most circumstances unless you have an especially good connection. You can also store chipped cards (like credit cards) in here to prevent unintentional reading.

4. For the reasons mentioned in #3 above, an at-home meter test is extremely inaccurate and unreliable. That said, a far field RF meter such as the one you are using is highly influenced by ambient RF levels that exist almost everywhere. Again, we do not aim to eliminate the radiation from the device, nor from your surroundings, but our technology does deflect the radiation away from the body.
Laptop computers are best placed on a table at as much of an arm’s length away as possible to minimize radioactive contact. If you must use your laptop on your lap, you can purchase a laptop cooling pad which will add a bit of extra space between the device and your body. Even better are laptop cases specifically designed to shield against radiation.
A few epidemiology studies have reported higher rates of tumors inside the skull among people who use cell phones heavily for 10 years or more. Of particular concern are benign Schwann cell tumors called acoustic neuromas, which affect nerve cells connecting the inner ear with structures inside the brain. These growths can in some instances progress to malignant cancer with time. But other studies have found no evidence of acoustic neuromas or brain tumors in heavy cell phone users.
Cooper's prototype arrived on the market a decade later at the staggering price of $3,995. Designed by Rudy Krolopp, it was known as the Motorola DynaTAC 8000X, or simply "the brick.” Featuring 20 large buttons and a long rubber antenna, it measured about 11 inches high, weighed almost 2 pounds, provided one hour of battery life and could store 30 phone numbers.
Powerful shielding material lines the back of the holster and reflects up to 99% of cell phone radiation away from your body. It uses well established science– inside each holster is a layer of metalized high tech fabric that forms a barrier to EMF radiation. Just attach the holster to your belt and slip in your phone. The shield doesn’t alter the behavior of your phone, nor cause increased drain of your phone’s battery. The shielding simply blocks the radiation that would have otherwise been absorbed by your body and reflects it away. Lifetime mfr wty.
Specifically, we looked for studies that measured rates of acoustic neuromas, gliomas, meningiomas, and thyroid cancers. We also narrowed our search to studies that looked at the effect of radio-frequency radiation originating from an actual cellphone, rather than experimental equipment. We did this because we wanted evidence that could apply to real life, not specific laboratory settings or hypothetical outcomes.
Parents and consumer advocacy groups occasionally capture attention for voicing concerns about cellphones and other types of non-ionizing radio-frequency radiation exposure, such as the energy emitted from wifi routers in schools. In some cases, they have exaggerated what we know about the risks to kids, and rarely note that cellphones are also just one of many radiation sources we all live with. (Even the Earth itself, the air we breathe, and the sun and stars in our galaxy constantly give off radiation.)
In a February 2 statement, Jeffrey Shuren, director of the FDA’s Center for Devices and Radiological Health, wrote that despite the NTP study’s results, the combined evidence on RF exposure and human cancer—which by now amounts to hundreds of studies—has “given us confidence that the current safety limits for cell phone radiation remain acceptable for protecting the public health.” Chonock says that for him, evidence from the Ramazzini study does not alter that conclusion. “We continue to agree with the FDA statement,” he says.
Cell phones work by sending signals to (and receiving them from) nearby cell towers (base stations) using RF waves. This is a form of electromagnetic energy that falls between FM radio waves and microwaves. Like FM radio waves, microwaves, visible light, and heat, RF waves are a form of non-ionizing radiation. They don’t have enough energy to cause cancer by directly damaging the DNA inside cells. RF waves are different from stronger (ionizing) types of radiation such as x-rays, gamma rays, and ultraviolet (UV) light, which can break the chemical bonds in DNA.

Moving the meter around the case, we detect readings on the side, back and front of the case. We use the multi-directional TES 593 meter which measures 10 MHz to 8GHz. We use the unit of micro-watts per square centimeter, which looks like this little symbol: μW/cm² and we use it on the max setting which shows the maximum measured value. In non-science speak: the highest level of RF we see, which could be from the back the side or the front. 
I really want to caution you to be careful of any "expert" or EMF blogger recommending anti-radiation filtering cases, stickers that attach to the phone or necklaces to "ward off" EMF.  I get it, when I first realized 25 years ago that I was sensitive to electromagnetic energy and then later, when I understood that without a doubt, man made electromagnetic radiation has a biological effect on my body, I wanted an easy fix.  I tried the shielding materials and cases and I just did not feel any better.  Then I bought meters to see if the energy changed and I actually noticed what the California Department of Health now says and it's what the FTC and FCC post warnings about:  "Some shielding materials can make exposures worse". So please, be careful and read on for what you can do to avoid electromagnetic radiation exposure.
Anti-radiation or radiation blocking or phone shield cases. Do they Work? SafeSleeve, DefenderShield, Vest, Alara, Pong, Reach and ShieldMe  and other EMF protection phone cases claim to block the radiation from your cellphone or smartphone. Anti-radiation cellphone case brands make enticing claims like this: ". . .eliminate up to 99% of the harmful radiation coming from the phone!"

Some people might consider choosing a phone with a low SAR value. Different models of phones can give off different levels of RF waves. But as noted above, according to the FCC the SAR value is not always a good indicator of a person’s exposure to RF waves during normal cell phone use. One way to get information on the SAR level for a specific phone model is to visit the phone maker’s website. The FCC has links to some of these sites here: www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellular-telephones. If you know the FCC identification (ID) number for a phone model (which can often be found somewhere on the phone or in the user manual), you can also go to the following web address: www.fcc.gov/oet/ea/fccid. On this page, you will see instructions for entering the FCC ID number.
Unfortunately, however, we’ll probably never have an RCT on cellphones and cancer in humans. It’d be too difficult and too expensive to randomly assign particular levels of cellphone use to thousands of people and have them stick with those plans for enough time (we’re talking at least five years) to figure out whether certain types of phones or phone use patterns cause cancer to develop. That’s not to mention the fact it’d be nearly impossible to find a group of people willing to not use cellphones and then make sure they actually stick to their promise.
This is why it’s important to always use either your phone’s speakerphone or an appropriate wired earpiece whenever possible, avoiding direct contact between your phone and your ear or hand. The best earpieces are those equipped with hollow tubing between the antenna in the wire and the earpiece, as these help maximize the distance between the radiation-emitting antenna and your head.

The Specific Absorption Rate that the FCC, with input from many other government institutions, decided on, is defined using an average of a 30-minute phone call with the cell phone held directly to the ear. Since modern cell phones are used in all sorts of manners, ie speakerphone, scrolling through social media, browsing the web, etc, a base had to be set.
When we think of harmful radiation, things like X-rays or gamma rays usually come to mind, but these types of radiation are different from mobile phone radiation in important ways. Radiation on the ultraviolet side of visible light, like those types just mentioned, has a wavelength that is short enough to alter some of the chemical properties of the objects it interacts with. It is referred to as ionizing radiation, for this reason. Non-ionizing radiation, which includes visible light, microwaves and radio waves, is typically regarded as harmless. Large amounts of it can produce a heating effect, like in a microwave oven, but no short-term damage has been linked to exposure to non-ionizing radiation.
These stick on “blockers” don’t work. I am EHS and can tell you with certainty (because I feel the fields) that they are not blocking anything. You must use substantial materials like those used in faraday cages (silver and copper), which are now manufactured in materials and fabrics, or avoid EMF use period. Just look at military use for example. They are not using stick on blockers. Follow Ty’s advice for minimizing and avoiding EMF, and look up EMF blocking fabrics, building materials, etc… for the real blockers.

We spent 45 hours on research, videography, and editing, to review the top choices for this wiki. Sure, there may not currently be any hard proof that cell phones release enough radiation to be harmful, but do you really want to take the chance when you can easily block almost all emissions from reaching your body with one of these anti-radiation phone cases? Most look just as stylish as traditional cases, and some even double as anti-spying and RFID blockers. When users buy our independently chosen editorial picks, we may earn commissions to support our work. Skip to the best anti-radiation phone case on Amazon.

There’s no question that portable phones and computers offer many conveniences and have made our lives easier in countless ways. For many people this convenience outweighs the worry of EMFs. My hope is that by becoming aware of the sources and dangers of cell phone radiation and EMFs, you’ll take steps to minimize exposure for both you and your family.
Some products (http://www.safecell.net/reports01.html for example) are tested using a piece of shielding material in a laboratory test jig. These tests legitimately show the amount of radiation which penetrates the shield, but results will be very different when compared to putting a small amount of the same shield on a large transmitter like a cellphone. Remember, the entire phone radiates. Placing a small amount of shielding, even if it is an effective shielding material, only shields that small area at best. Think about this analogy: no light will penetrate a penny as it is a very effective light shield, but it is silly to think that holding a penny up to the sun will put you in darkness.
Don’t be mislead by a common misconception started in the 90′s that wired headsets, that the headset that came with your cell phone is a safe alternative to placing a phone to your head.   This is simply not true at all! Ordinary headsets use a wire to deliver sound to an electronic earpiece that can deliver electromagnetic radiation into your head directly through your ear canal.
When you make a phone call, just flip the shielded front cover down when you put the phone against your head. It’s that simple. By keeping the shielded front cover closed while against any part of your body, a barrier is created to protect from a broad spectrum of potentially harmful cell phone radiation emissions, yet won’t affect signal quality. You can use your cell phone with a higher sense of safety by simply keeping the shielded flip cover between your body and radiation-emitting source.

Yes, the information transferred between the base unit (the phone’s stationary unit) and the wireless phone’s mobile unit is transferred as radiowave radiation. Therefore, the “precautionary principle” should also be adopted regarding wireless phones. In addition to the guidelines regarding mobile phones, the Ministry of Health recommends regarding wireless phones:


Most cellphone shielding products are designed to reduce radiation to the user while still allowing the phone to function. This means that some radiation can still get to the phone… and some radiation can still get out of the phone! But sometimes you need to completely kill the signal. The RF Kill Box is a full-metal shielding jacket with very high shielding performance.

This is a 2 pieces of plastic sandwiched together by glue. Don't believe me? Take it apart. This item works no better than the existing case on your phone. If you are that concerned with cellphone radiation, you should be equally concerned about the cheap plastic and toxic glue that this is comprised of. Also know the fact that they've stolen $25 from your wallet when you purchase this hokey product...Technology at it's finest.
✅ STOP CRIPPLING YOUR IMMUNE SYSTEM: Radiation waves have been shown to attack the human immune system, lowering our defences and making us prone to diseases and ailments. The special combination of crystals and minerals used in our EMF protection cell phone radiation shield will restore balance and increase the body’s defense against harmful radiation.
Bonus application! In addition to shielding magnetic fields, PaperSHIELD is also quite good at shielding radiowaves (cellphone, wifi, etc). And because of the adhesive backing, it can be adhered to almost any surface you need such as the inside or back of your cellphone case. (Use a near field meter to test RF shielding performance.) Note that it is not transparent, so it can't be used on the touch screen side. Cover the cut edges with sturdy tape as they can be sharp. 36 inches wide. Made in USA.
Radiofrequency radiation is a form of electromagnetic radiation. Electromagnetic radiation can be categorized into two types: ionizing (e.g., x-rays, radon, and cosmic rays) and non-ionizing (e.g., radiofrequency and extremely low frequency, or power frequency). Electromagnetic radiation is defined according to its wavelength and frequency, which is the number of cycles of a wave that pass a reference point per second. Electromagnetic frequencies are described in units called hertz (Hz).
×