ShieldMe On the ShieldMe site is a message from Wireless Connection CEO Rose Vitale addressing issues with the cellphone industry and she makes some good points. As far as how ShieldMe works she states, " Our ShieldMe cases help deflect up to 99% of the harmful EMF, RF or microwave radiation emitted from a cellphone while carrying around or when on a call." The demonstration of the SheildMe case shows levels that like the "EMF protection cellphone cases" is many many times higher than levels EMF expert Larry Gust follows as a certified building biologist.
We purchased a cell phone case directly from SafeSleeve. Once received, we attempted to determine how much radiation protection is actually possible from the product. What we learned is that NONE of the products SafeSleeve sells are actually tested by an FCC approved lab. Their advertising is very misleading! The testing results they use as "proof" that their products are tested was a single test done ONLY on a piece of material they claim is used inside their products. NONE OF THEIR PRODUCTS HAVE EVER BEEN TESTED BY AN FCC APPROVED TESTING LAB. We read the test report from SafeSleeve's website and called the testing lab listed on the report who verified this information. We also called an independent, FCC approved cell phone testing lab and they explained the same thing. We were informed that radiation comes from all sides and edges of a cell phone, so when you use the SafeSleeve cell phone case, you are NOT being protected. SafeSleeve cell phone cases offer you no more protection than using a cell phone without a case. To protect yourself from cell phone radiation, you still need to use hold the phone at least 6-8 inches from your body, use the speaker for conversations, text more than talk, and don't use or carry your cell phone against your body. We attempted to have the SafeSleeve cell phone case tested and were informed that to have it properly tested would require paying thousands of dollars in a lab equipped for such testing; using an RF meter or similar device to test a cell phone case will not provide meaningful or accurate results. If SafeSleeve were an honest company, they would have each of their products tested in an FCC approved lab, the same type of lab that cell phones are tested in. However, SafeSleeve is not willing to spend the money. If you don't believe us, call an FCC approved cell phone testing lab and ask a few questions. In the meantime, don't waste your money on SafeSleeve products. Note: SafeSleeve attempts to protect themselves by not listing any business phone number or business address on their website. Any questions/complaints you may have with SafeSleeve are strictly handled via email. They refused our request to speak to a "real person" regarding our questions or issues with their products. Does the word SCAM apply here? We think so.
You’ll notice radiation is split into two categories here: ionizing and non-ionizing. The waves emitted from radios, cellphones and cellphone towers, Wi-Fi routers, and microwaves are referred to as “radio-frequency” radiation. That’s a type of “non-ionizing” radiation, since it doesn’t carry enough energy to “ionize” — or strip electrons from atoms and molecules. (Other sources of non-ionizing radiation, as you can see in our chart, include visible and infrared light.)
SafeSleeve's report is right up front about showing that they do not test or certify the Safe Sleeve case, rather they are simply testing the material they put into the case in a completely artificial environment, in a laboratory setting, using a signal generator and a power amplifier. Safe Sleeve includes photos showing how the measurements are taken. But that may not be how anyone will ever use their phone.
The FCC has yet to implement GAO’s recommendations to more closely reflect real-life use. For a narrow subset of smartphones – those sold with lanyards or straps – the FCC advises manufacturers to test phones at a distance of no more than 5 mm from the body (FCC 2014). Yet the FCC has done nothing to ensure more realistic testing of most other smartphones or to account for the widespread use of accessories such as cases, which many different manufacturers produce with both metallic and non-metallic components.
Specific Absorption Rate (SAR) is an indicator for calculating the level of radiation absorbed in the body. This indicator represents the rate of energy absorption by the tissue and is expressed in units of Watt/kg. The Consumer Protection Regulations (information on non-ionizing radiation from mobile phones) of 2002, stipulate the duty to label the product, specifying the radiation level of the phone’s model and the maximum permitted radiation level. This regulation allows to compare the emitted radiation level between different instruments and to take this into consideration when weighing the factors determining the choice of a new instrument at the time of its purchase.
If you're looking for ways to limit your exposure to the electromagnetic emissions from your cell phone, know that, according to the FTC, there is no scientific proof that so-called shields significantly reduce exposure from these electromagnetic emissions. In fact, products that block only the earpiece – or another small portion of the phone – are totally ineffective because the entire phone emits electromagnetic waves. What's more, these shields may interfere with the phone's signal, cause it to draw even more power to communicate with the base station, and possibly emit more radiation.
The energy of electromagnetic radiation is determined by its frequency; ionizing radiation is high frequency, and therefore high energy, whereas non-ionizing radiation is low frequency, and therefore low energy. The NCI fact sheet Electromagnetic Fields and Cancer lists sources of radiofrequency radiation. More information about ionizing radiation can be found on the Radiation page.