I can’t count how many times I’ve heard people speculate, joke, or jokingly speculate that their cellphone might be giving them cancer. It comes from a very reasonable place of discomfort — few people understand how radiation works, we put our phones right beside our brains all the time, and technology in general often feels like it ought to be causing some sort of societal ill.
Exposure to ionizing radiation, such as from x-rays, is known to increase the risk of cancer. However, although many studies have examined the potential health effects of non-ionizing radiation from radar, microwave ovens, cell phones, and other sources, there is currently no consistent evidence that non-ionizing radiation increases cancer risk in humans (2).

Cooper's prototype arrived on the market a decade later at the staggering price of $3,995. Designed by Rudy Krolopp, it was known as the Motorola DynaTAC 8000X, or simply "the brick.” Featuring 20 large buttons and a long rubber antenna, it measured about 11 inches high, weighed almost 2 pounds, provided one hour of battery life and could store 30 phone numbers.

If not, then how can the seller claim that the reported effects on cell cultures, muscle strength testing, plants, skin heating, or other biological effects are due to electromagnetic changes (see http://www.cellphone-health.com/mret-howitworks.htm for example)? Electromagnetic field characteristics are well known and easy to measure. If there is truly an electromagnetic change, that change will be easy to detect and measure.
We purchased a cell phone case directly from SafeSleeve. Once received, we attempted to determine how much radiation protection is actually possible from the product. What we learned is that NONE of the products SafeSleeve sells are actually tested by an FCC approved lab. Their advertising is very misleading! The testing results they use as "proof" that their products are tested was a single test done ONLY on a piece of material they claim is used inside their products. NONE OF THEIR PRODUCTS HAVE EVER BEEN TESTED BY AN FCC APPROVED TESTING LAB. We read the test report from SafeSleeve's website and called the testing lab listed on the report who verified this information. We also called an independent, FCC approved cell phone testing lab and they explained the same thing. We were informed that radiation comes from all sides and edges of a cell phone, so when you use the SafeSleeve cell phone case, you are NOT being protected. SafeSleeve cell phone cases offer you no more protection than using a cell phone without a case. To protect yourself from cell phone radiation, you still need to use hold the phone at least 6-8 inches from your body, use the speaker for conversations, text more than talk, and don't use or carry your cell phone against your body. We attempted to have the SafeSleeve cell phone case tested and were informed that to have it properly tested would require paying thousands of dollars in a lab equipped for such testing; using an RF meter or similar device to test a cell phone case will not provide meaningful or accurate results. If SafeSleeve were an honest company, they would have each of their products tested in an FCC approved lab, the same type of lab that cell phones are tested in. However, SafeSleeve is not willing to spend the money. If you don't believe us, call an FCC approved cell phone testing lab and ask a few questions. In the meantime, don't waste your money on SafeSleeve products. Note: SafeSleeve attempts to protect themselves by not listing any business phone number or business address on their website. Any questions/complaints you may have with SafeSleeve are strictly handled via email. They refused our request to speak to a "real person" regarding our questions or issues with their products. Does the word SCAM apply here? We think so.

There are fears that the electromagnetic radiation emitted from mobile phone handsets may harm health. In particular, there have been claims that it could affect the body’s cells, brain or immune system and increase the risk of developing a range of diseases from cancer to Alzheimer’s. Laboratory tests on mice have shown that radiation from mobile phones can have an adverse effect on their overall health. It is still not clear whether those findings can be applied directly to humans. A study by scientists in Finland, published in 2002, suggested that the electromagnetic radiation did affect human brain tissue. But they played down their findings saying more research was needed to see if the effects were the same in living people. Another study by scientists in Sweden, also published in 2002, claimed to have found a link between analogue mobile phones and brain tumours. It suggested users of “first generation” phones had a 30% higher risk of developing tumours than people who did not. However, the findings were controversial and there have been no similar studies into the effects of modern GSM phones. There have also been reports of people suffering from headaches, fatigue and loss of concentration after using their mobile phones. However, these claims have not been scientifically substantiated.

We tested the garments in a similar setup with the fabric between the phone and the meters. We also tested the garments while sitting on a couch, holding the Gigahertz Solutions monitor against my pregnant belly under the product (blanket/nursing cover) and measuring the reduction of the RF from my cellphone in my hand at normal texting/web-surfing distance.
"Someone claiming they need to reduce [the safe SAR level of 2 W/kg] by 90-percent — they just have no evidence to make that claim, and they are actually playing on the fact that people will be concerned enough about the possible cancer risk, although they don't understand that there's no sufficient data yet to make a statement about an actual cancer risk," said Professor Olver.
Most cellphone shielding products are designed to reduce radiation to the user while still allowing the phone to function. This means that some radiation can still get to the phone… and some radiation can still get out of the phone! But sometimes you need to completely kill the signal. The RF Kill Box is a full-metal shielding jacket with very high shielding performance.
There were no biological hypotheses tested in the study. It was therefore only a numbers game. Ignored were mechanisms of disease found in other studies of cell phone radiation effects, including genetic damage, blood-brain barrier leakage, and disrupted intercellular communication. The study did not discuss any research supporting the notion that cell phones could cause problems in users.
There are few if any references to actual studies in published, peer-reviewed journals that support the claim that Aires, or any other, cell phone shield actually works. The "Researches" page contains a superficially impressive list of sciencey-sounding titles and findings supposedly demonstrating the importance of using cell phone shields, all of them in Russia for some reason.
Most of the research is attributed to "SPSU," which is presumably St. Petersburg State Polytechnic University, and some of the research, it is suggested, was conducted at the Kirov Military Medical Academy, though it's unclear why a military academy would conduct clinical research on civilian cell phone radiation. The names of the scientists who conducted these studies are conspicuously absent, as are any published results.

So, what types of RF are these cases intended to block? If they block the frequency being used by the phone than if the blocking is complete the phone won’t work. If it’s partial than, as noted by the FCC and related in the article, the phone may attempt to compensate for the weakened signal by increasing it’s signal strength, thereby emitting higher levels of radiation itself, and reducing battery life in the process.

If you want to measure the EMF radiation from your own phone, and know if EMF protection products are working, you should get a quality EMF meter. I highly recommend the new TriField TF2 (read my review) as it’s simple to use, lasts forever, is extremely accurate, and measures all three types of EMF radiation. If you’re looking for a low-cost EMF meter I really like the Meterk (read my review).

Open the “Step 2” packet and remove the cloth and rub the glass surface with the Ti22 Liquid Titanium Shield Nano liquid treated wipe which will coat the surface with the protective Nano liquid. The liquid needs to be applied for at least 90 seconds rubbing every part of the glass. Pushing gently into the glass to absorb the advanced formula. You can also use your finger to rub the liquid into the glass and don’t forget to apply to the camera lens and back-glass if you have a glass back. Allow the Ti22 Liquid Titanium Shield liquid to dry for at least 60-90 seconds before handling. Wash your hands carefully after the treatment.

The NTP studied radiofrequency radiation (2G and 3G frequencies) in rats and mice (33, 34). This large project was conducted in highly specialized labs that specified and controlled sources of radiation and measured their effects. The rodents experienced whole-body exposures of 3, 6, or 9 watts per kilogram of body weight for 5 or 7 days per week for 18 hours per day in cycles of 10 minutes on, 10 minutes off. A research overview of the rodent studies, with links to the peer-review summary, is available on NTP website. The primary outcomes observed were a small number of cancers of Schwann cells in the heart and non-cancerous changes (hyperplasia) in the same tissues for male rats, but not female rats, nor in mice overall.

The owner of a damaged case are always encouraged send it in for a replacement and when available a 2nd generation final production case is always sent. As demand increases for a particular color and model — silicon cases are made with RF Safe’s peel-n-shield embedded inside the flip cover. The 2nd Gen cover also includes room for a credit card but this is discouraged because excessive conductive RFID material that pushes the shielding at an angle from a phones surface can compromise shielding effectiveness.

Epidemiology studies investigating cell phone use patterns with human cancer risk have produced inconsistent results. Some studies enrolled people who already had tumors with suspected links to RF radiation, such as gliomas, acoustic neuromas and salivary gland tumors. Researchers compared the self-reported cell phone use habits of the cancer patients with those of other people who did not have the same diseases. Other studies enrolled people while they were still healthy, and then followed them over time to see if new cancer diagnoses tracked with how they used cell phones. All the epidemiology studies, however, have troubling limitations, including that enrolled subjects often do not report their cell phone use habits accurately on questionnaires.
Also noteworthy is that the studies evaluated radiation exposures in different ways. The NTP looked at “near-field” exposures, which approximate how people are dosed while using cell phones. Ramazzini researchers looked at “far-field” exposures, which approximate the wireless RF radiation that bombards us from sources all around us, including wireless devices such as tablet and laptop computers. Yet they generated comparable results: Male rats in both studies (but not mice or female animals) developed schwannomas of the heart at statistically higher rates than control animals that were not exposed.

So what do you do when you need a wireless radiation emitting device but you want to limit the exposure to the people? Perhaps you use a wireless baby monitor, have a cordless phone base station, or you sleep with your cell phone on your nightstand. Maybe there is a wifi router right next to you at work or school. RadiaFence is the answer. It’s a free-standing, semi-transparent microwave barrier that you can put almost anywhere you need. It blocks most of the radiation emitted in one direction by “casting a shadow” (typically 70-90% reduction), while still allowing the wireless device to work. Like sitting in the shade on a sunny day. Portable, inexpensive, attractive. And it couldn’t be easier to use. If you like, you can add a decorative photo or warning sign to change the appearance. Available in 5 styles. Pick the sizes which meet your needs. Style may differ from images.

There are alternate technologies that can be considered when looking to reduce cell phone radiation exposure which we don’t use. Why don’t we use them? Incorporating technologies such as antennas into a case can greatly reduce outgoing cell phone radiation levels when close to the cell tower, but not totally. If farther away, the cell phone signal levels increase, as does the radiation exposure to the body, possibly to unacceptable output power levels. This design does not reduce radiation exposure from the WiFi and Bluetooth RF because cell phones do not have the capacity to reduce their power levels whether or not an antenna is present. Maybe just as important, this design does not have the shielding capacity for ELF emissions which have the same dangers as the RF emissions. Other device attachments like buttons and stickers are minimally effective to totally ineffective, with no scientific basis. In short, there are no other technologies capable of up to eliminating all of the many potentially harmful cell phone emissions from hitting the body.

It also means regulators need to make sure their policies reflect new levels of exposure. The Federal Communications Commission currently oversees cellphone safety and sets the limits for how much radiation people should be exposed to. (This is measured by the specific absorption rate — the rate at which the body absorbs radio frequency energy — and the current limit for cellphones is 1.6 watts of energy per kilogram of tissue. The whole-body threshold is a SAR value of 0.08 watts per kilogram, and the tower radiation limit is 10 watts per square meter.)
Read the “fine print” from the manufacturer’s instruction manual which tells users to put a distance between the phone and your head and body. These fine print warnings range  from a few millimeters to almost an inch. The fine print warnings on other wireless devices (such as Wi-Fi routers, wireless printers, home cordless phone base stations and baby monitors) generally state the distance should be at least 20 cm, or about 8 inches. If people are closer than the manufacturer stated separation distance, then they can be exposed to RF levels that violate the US government FCC limits for this radiation.
Leibovich was very careful to point out in our interview that Cellsafe is not claiming that the radiation absorbed by the body during phone use leads to health issues like brain tumours, male infertility or damage to unborn babies. But the Cellsafe website strongly suggests these links. Its homepage (image below) leads with the phrase "You should be concerned!" in an eye-catching red, and there is as much screen real estate on the site dedicated to information about the dangers of radiation, as there is for descriptions of the Cellsafe products. This information refers to "high levels of RF radiation" in several places, but it doesn't say whether this describes radiation from phone use.
"To expect relief from radiation exposure from one specific device, is nearly impossible. It’s crucial to weigh in the MANY environmental factors; such as, temperature, atmospheric pressure, other radio waves, emissions from other devices, energy shifts from others around you, and Schumann Resonance shifts. Therefore," he explains that “relying on alteration of the environment as a safety precaution is always a game of chance…and signals affect people differently,” which adds another variables in the game of chance.
Only 0.010 inch thick, PaperSHIELD is flexible and can be easily cut with a scissors and shaped by hand into simple or very complex shapes. High saturation and moderate permeability make this ideal for shielding weak magnets, or stronger magnets with many layers of shielding. This material is particularly suited for achieving precise levels of partial shielding as you can add exactly the right number of layers to achieve the desired result. White paper on one side can be imprinted (by you). Peel and stick adhesive on the other side permits easy and semi-permanent mounting almost anywhere. Magnets will stick to it nicely.
Most cellphone shielding products are designed to reduce radiation to the user while still allowing the phone to function. This means that some radiation can still get to the phone… and some radiation can still get out of the phone! But sometimes you need to completely kill the signal. The RF Kill Box is a full-metal shielding jacket with very high shielding performance.
Radio base licensing procedures have been established in the majority of urban spaces regulated either at municipal/county, provincial/state or national level. Mobile telephone service providers are, in many regions, required to obtain construction licenses, provide certification of antenna emission levels and assure compliance to ICNIRP standards and/or to other environmental legislation.
The researchers found other strange effects that muddied the interpretation of the studies: The rats exposed to cellphones seemed to outlive the rats in the control group, for example. There was no clear linear relationship between higher levels of cellphone exposure and more cancer at some tissue sites, and the cancer rate in the control group was lower than it should have been at other tissue sites.
Open the “Step 2” packet and remove the cloth and rub the glass surface with the Ti22 Liquid Titanium Shield Nano liquid treated wipe which will coat the surface with the protective Nano liquid. The liquid needs to be applied for at least 90 seconds rubbing every part of the glass. Pushing gently into the glass to absorb the advanced formula. You can also use your finger to rub the liquid into the glass and don’t forget to apply to the camera lens and back-glass if you have a glass back. Allow the Ti22 Liquid Titanium Shield liquid to dry for at least 60-90 seconds before handling. Wash your hands carefully after the treatment.
W. Kim Johnson, a retired physicist and past president of the New Mexico Academy of Science, reviewed the Aires web site for Discovery News and described the material as gibberish, saying that the authors "of the technical description of the ‘Aires' device reads like a random selection of technical terminology. The working description for this device is made up of jargon that, in the end, really says nothing."
EMP Faraday Bags are designed to protect against damaging EMP current, static discharge, microwave transmission, RFID snooping and moisture damage. Protect your sensitive electronics (laptops, cellphones, iPads etc), precious memories (flash drives, floppy disks, tape recordings, etc) homeopathic remedies and medications, passports, credit cards and other devices from damage and spying. Could make all the difference if there is an EMP event or solar flare. Opening can be heat sealed with a hot iron for security reasons or long term storage. Manufacturer recommends that you “nest” items inside multiple layers of protection (double bagging) for best results.
Don’t be mislead by a common misconception started in the 90′s that wired headsets, that the headset that came with your cell phone is a safe alternative to placing a phone to your head.   This is simply not true at all! Ordinary headsets use a wire to deliver sound to an electronic earpiece that can deliver electromagnetic radiation into your head directly through your ear canal.
The frequency of radiofrequency electromagnetic radiation ranges from 30 kilohertz (30 kHz, or 30,000 Hz) to 300 gigahertz (300 GHz, or 300 billion Hz). Electromagnetic fields in the radiofrequency range are used for telecommunications applications, including cell phones, televisions, and radio transmissions. The human body absorbs energy from devices that emit radiofrequency electromagnetic radiation. The dose of the absorbed energy is estimated using a measure called the specific absorption rate (SAR), which is expressed in watts per kilogram of body weight.