As far as which of those match your device, that really depends on your carrier. AT&T, Verizon, Sprint, and T-Mobile all have different frequencies. To further complicate things, in one geographic region of the country they may use one frequency, while another is used elsewhere. It all depends on which FCC licenses they have the rights to in each region.
Users were defined as anyone who made at least one phone call per week for six months between 1982 and 1995. So any person who made 26 calls was a cell phone user and therefore considered exposed to radiation. Those with less than 26 calls were non-users. In reality, the radiation exposure between users and non-users defined in this manner is not discernable.
The following charts list SAR levels for the Apple iPhone, Samsung Galaxy S, as well as 20 of the highest SAR level cellphones and 20 of the lowest SAR level cellphones. The list provides the maximum possible SAR level from the phone (many phones have differing SAR levels depending on where and how the phone is used). If your phone is not on either list, you can find the SAR level for your specific phone by checking the online FCC database.
But the pair of studies by the US National Toxicology Program found “clear evidence” that exposure to radiation caused heart tumors in male rats, and found “some evidence” that it caused tumors in the brains of male rats. (Both are positive results; the NTP uses the labels “clear evidence,” “some evidence,” “equivocal evidence” and “no evidence” when making conclusions.)
You hit the nail on the head when you say that distance is key when it comes to EMF exposure. The solutions you sell will definitely help provide that separation. That said, our products are different in that they shield the user from EMF while allowing them to use the device as they normally would, without needing to hold their device by a rope or placing it in a faraday cage that eliminates signal altogether.
4. For the reasons mentioned in #3 above, an at-home meter test is extremely inaccurate and unreliable. That said, a far field RF meter such as the one you are using is highly influenced by ambient RF levels that exist almost everywhere. Again, we do not aim to eliminate the radiation from the device, nor from your surroundings, but our technology does deflect the radiation away from the body.

So, what types of RF are these cases intended to block? If they block the frequency being used by the phone than if the blocking is complete the phone won’t work. If it’s partial than, as noted by the FCC and related in the article, the phone may attempt to compensate for the weakened signal by increasing it’s signal strength, thereby emitting higher levels of radiation itself, and reducing battery life in the process.


W. Kim Johnson, a retired physicist and past president of the New Mexico Academy of Science, reviewed the Aires web site for Discovery News and described the material as gibberish, saying that the authors "of the technical description of the ‘Aires' device reads like a random selection of technical terminology. The working description for this device is made up of jargon that, in the end, really says nothing."

The cellular phone industry was born in the early 1980s, when communications technology that had been developed for the Department of Defense was put into commerce by companies focusing on profits. This group, with big ideas but limited resources, pressured government regulatory agencies—particularly the Food and Drug Administration (FDA)—to allow cell phones to be sold without pre-market testing. The rationale, known as the “low power exclusion,” distinguished cell phones from dangerous microwave ovens based on the amount of power used to push the microwaves. At that time, the only health effect seen from microwaves involved high power strong enough to heat human tissue. The pressure worked, and cell phones were exempted from any type of regulatory oversight, an exemption that continues today. An eager public grabbed up the cell phones, but according to Dr. George Carlo, “Those phones were slowly prompting a host of health problems.”
Open the “Step 2” packet and remove the cloth and rub the glass surface with the Ti22 Liquid Titanium Shield Nano liquid treated wipe which will coat the surface with the protective Nano liquid. The liquid needs to be applied for at least 90 seconds rubbing every part of the glass. Pushing gently into the glass to absorb the advanced formula. You can also use your finger to rub the liquid into the glass and don’t forget to apply to the camera lens and back-glass if you have a glass back. Allow the Ti22 Liquid Titanium Shield liquid to dry for at least 60-90 seconds before handling. Wash your hands carefully after the treatment.
(Some common flaws in these studies: The summaries of the evidence weren’t comprehensive, the researchers often didn’t look at the quality of the studies they found, and they failed to do other simple things that would limit bias from creeping in. They also relied on case-control studies, a poor method to determine causality — more on that soon.) So we didn’t include these eight reviews in our analysis.

Overall, the reviews of case-control studies seem to suggest there is perhaps no risk of cancer with cellphone use — unless you look at some subgroups (like people in blinded studies or people with long-term exposures). But these reviews are based on case-control studies — which are like the National Enquirer of the science world: cheap and often misleading.

If you're looking for ways to limit your exposure to the electromagnetic emissions from your cell phone, know that, according to the FTC, there is no scientific proof that so-called shields significantly reduce exposure from these electromagnetic emissions. In fact, products that block only the earpiece – or another small portion of the phone – are totally ineffective because the entire phone emits electromagnetic waves. What's more, these shields may interfere with the phone's signal, cause it to draw even more power to communicate with the base station, and possibly emit more radiation.


The amount of RF energy absorbed from the phone into the user’s body is known as the specific absorption rate (SAR). Different cell phones have different SAR levels. Cell phone makers are required to report the maximum SAR level of their product to the US Federal Communications Commission (FCC). This information can often be found on the manufacturer’s website or in the user manual for the phone. The upper limit of SAR allowed in the United States is 1.6 watts per kilogram (W/kg) of body weight.
The base station is equipped with antennas for reception and transmission. In order to communicate, the mobile phones and the antennas at the base station emit radiowave radiation (see below). The mobile phone instrument transmits a lower amount of radiation than the one transmitted by the transmission center (cell site), but because the instrument is near the body, the body directly absorbs the energy from the instrument’s antenna.
The magnet is not nearly as strong as it should be. If the higher priced value is based on antiradiation technology - with quality control testing - how could they not install a magnet that is strong enough to withstand a drop or at least a smaller magnet on the cardholder side? You have to put the magnet flap in-between the back/front which is very annoying...and we all know the leather is not from Florence.
For example, cellphone manufacturers currently test these devices for compliance with FCC standards by placing them against the head, and near the torso with some separation. Just check out Apple’s iPhone manual: The company tests the specific absorption rate at a 5mm separation from the body. But if you wear your device in your pocket, you’re probably not going to have that 5mm separation, meaning you may be exposed to more radiation — perhaps enough to exceed current standards.
SafeSleeve is garbage. And the customer service is even worse. I bought one in October 2017 and by the end of January 2018 the sticky patch had worn off to completely no longer be able to hold my phone. I contacted the company, and they would not replace it even though they recognized it was due to “normal wear” because they only have a 60 day warranty. And offered only a one-time 25% off coupon. for a $45 case only to be guaranteed for 2 months is absurd to me! I asked to be contacted by a manager as they do not have a phone number listed anywhere, just email address and has been a week and no response. Totally ignored.

There’s a broad range of radiation types, and lots of harmless things emit radiation — like bananas, Brazil nuts, and granite countertops, according to Cincinnati Children’s Hospital. The type of radiation that comes out of our cellphones isn’t the same radiation that’s released by nuclear fallout or X-rays. Cellphone radiation, also known as radiofrequency radiation, is much weaker — so it can’t cause the same kind of cell damage that can lead to cancer.

Cell phones emit low levels of radio frequency energy (i.e., radio frequency radiation) in the microwave range while being used. It is well known that high levels of RF can produce biological damage through heating effects (this is how your microwave oven is able to cook food). However, it is not known to what extent or through what mechanism, lower levels of RF might cause adverse health effects as well. Several research studies have shown that the radio frequency radiation from wireless phone antennae “appears to cause genetic damage in human blood,” while another case study uncovered a “statistically significant increase” in neuro-epithelial brain tumors among cell phone users. Other research has shown little or no adverse effects. ABC’s 20/20 News (May 26, 2000) took the five most popular phones sold in the US and tested them at a highly respected German laboratory. Four out of the five phones tested were above the SAR limit. One thing is for certain, similar to the case of cigarette smoking, it will take several tests and many years before the effects of radio frequency radiation on the human body are known.


The NTP studied radiofrequency radiation (2G and 3G frequencies) in rats and mice (33, 34). This large project was conducted in highly specialized labs that specified and controlled sources of radiation and measured their effects. The rodents experienced whole-body exposures of 3, 6, or 9 watts per kilogram of body weight for 5 or 7 days per week for 18 hours per day in cycles of 10 minutes on, 10 minutes off. A research overview of the rodent studies, with links to the peer-review summary, is available on NTP website. The primary outcomes observed were a small number of cancers of Schwann cells in the heart and non-cancerous changes (hyperplasia) in the same tissues for male rats, but not female rats, nor in mice overall.
×