Wow so glad I read this article tonight. I have been suspicious of my tablet and phone and in my car – I was experiencing tingling and some irregular pain in odd areas of the body. When I was in my car is when I noticed it – then I realized the same thing would happen when I was reading on my tablet. I just had the discussion with my husband as the body does have an electrical field around it the EMP’s are interrupting that field and damaging the body., which is exactly what I suspected. I also recently read an article that two college girls conducted a “test” project they put a cell phone in one room with and tray of seedlings in soil and put the same tray in another room, very carefully monitoring both room with the exact same temperatures etc. And I believe they let the plants grow for over a week. In the room with the cell phone the seeds had not even sprouted and in the room without the cell phone the seed sprouted and the plants were at least and inch in growth – that is a simple but proven test that cell phones interrupt cellular growth and damage cells. Thank you to all who commented here. I do have to look up what is EHS. Also have to get this info to my daughter who gets headaches.

The average radiation level of a Bluetooth earpiece is 0.23 watts per kilogram (W/Kg) according to RF Safe. This is 10 to 100 times higher than the amount of radio frequency (RF) exposure needed to create “leaks” in the blood-brain barrier, allowing for toxins (not to mention the radiation itself!) to pass through into the brain. It’s best to just say NO to Bluetooth!


The CERENAT study, another case–control study conducted in multiple areas in France from 2004 to 2006 using data collected in face-to-face interviews using standardized questionnaires (18). This study found no association for either gliomas or meningiomas when comparing regular cell phone users with non-users. However, the heaviest users had significantly increased risks of both gliomas and meningiomas.
The exact source of radiation in a cell phone is from the transmitter, a device located near the antenna that converts audio data into electromagnetic waves. The amount of radiation a cell phone can emit is limited by legal restrictions in the U.S., Canada and Europe. Additionally, the average radiation levels of most mobile phones are available to the public, courtesy of the Federal Communications Commission in the U.S.
In order to protect the population living around base stations and users of mobile handsets, governments and regulatory bodies adopt safety standards, which translate to limits on exposure levels below a certain value. There are many proposed national and international standards, but that of the International Commission on Non-Ionizing Radiation Protection (ICNIRP) is the most respected one, and has been adopted so far by more than 80 countries. For radio stations, ICNIRP proposes two safety levels: one for occupational exposure, another one for the general population. Currently there are efforts underway to harmonise the different standards in existence.[26]
Cooper's prototype arrived on the market a decade later at the staggering price of $3,995. Designed by Rudy Krolopp, it was known as the Motorola DynaTAC 8000X, or simply "the brick.” Featuring 20 large buttons and a long rubber antenna, it measured about 11 inches high, weighed almost 2 pounds, provided one hour of battery life and could store 30 phone numbers.
More often power off your phone or set it to airplane mode with Wi-Fi OFF and Bluetooth OFF. Even in standby mode, your phone emits RF energy because it is constantly searching for service or new messages. If you do not need your cell phone, simply power it off. This also applies to all other wireless devices whereby the Wi-Fi antennas can be powered off. Wi-Fi enabled laptops, tablets and other wireless devices (such as gaming devices) are always transmitting even if you are not using them, so remember to power them off.

Some people might consider choosing a phone with a low SAR value. Different models of phones can give off different levels of RF waves. But as noted above, according to the FCC the SAR value is not always a good indicator of a person’s exposure to RF waves during normal cell phone use. One way to get information on the SAR level for a specific phone model is to visit the phone maker’s website. The FCC has links to some of these sites here: www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellular-telephones. If you know the FCC identification (ID) number for a phone model (which can often be found somewhere on the phone or in the user manual), you can also go to the following web address: www.fcc.gov/oet/ea/fccid. On this page, you will see instructions for entering the FCC ID number.
But according to the FCC, comparing SAR values between phones can be misleading. The listed SAR value is based only on the phone operating at its highest power, not on what users would typically be exposed to with normal phone use. The actual SAR value during use varies based on a number of factors, so it’s possible that a phone with a lower listed SAR value might actually expose a person to more RF energy than one with a higher listed SAR value in some cases.
For now, it’s probably better not to spend too much of your time worrying: you’re surrounded by cellphone signals, Wi-Fi signals, and all other kinds of radio frequency radiation day in and out — not just when you put your phone up to your face. And until the evidence suggests otherwise, all of this is still considered less of a cancer risk than eating red meat (which you shouldn't freak out about that much either).
* This specification establishes the requirements for heat-sealable, electrostatic protective, flexible barrier materials used for the military packaging of microcircuits, sensitive semiconductor devices, sensitive resistors, and associated higher assemblies. In addition, the type I materials provide for water vapor-proof protection and attenuation of electromagnetic radiation.
Stick on anti-radiation protection shields etc are often made of metal which may block signal and prevent reliable mobile phone communications with signal towers. Mobile phones recognise the potential for a dropped signal and actually increase power to compensate. The result is a fast draining battery and an even higher radiation output as a result of using the product (an exception to this are shields that are placed in between the phone and the user as these do not impede signal to cell towers to any significant degree)
A recent small study in people has shown that cell phones may also have some other effects on the brain, although it’s not clear if they’re harmful. The study found that when people had an active cell phone held up to their ear for 50 minutes, brain tissues on the same side of the head as the phone used more glucose than did tissues on the other side of the brain. Glucose is a sugar that normally serves as the brain’s fuel. Glucose use goes up in certain parts of the brain when it is in use, such as when we are thinking, speaking, or moving. The possible health effect, if any, from the increase in glucose use from cell phone energy is unknown.
Pong’s research indicates that badly designed cell phone cases can partially block a phone’s antenna, making the device work harder to transmit signals. Due to gaps in the FCC’s cell phone regulations, a phone worn right next to the body and enclosed by a case that obstructs the antenna could expose the user to more radiation than the FCC’s legal limit.

While an increased risk of brain tumours from the use of mobile phones is not established, the increasing use of mobile phones and the lack of data for mobile phone use over time periods longer than 15 years warrant further research of mobile phone use and brain cancer risk. In particular, with the recent popularity of mobile phone use among younger people, potentially longer lifetime of exposure, WHO has promoted further research on this group and is currently assessing the health impact of RF fields on all studied endpoints. A cohort study in Denmark linked billing information from more than 358,000 cell phone subscribers with brain tumour incidence data from the Danish Cancer Registry. The analyses found no association between cell phone use and the incidence of glioma, meningioma, or acoustic neuroma, even among people who had been cell phone subscribers for 13 or more years. (4)


It also means regulators need to make sure their policies reflect new levels of exposure. The Federal Communications Commission currently oversees cellphone safety and sets the limits for how much radiation people should be exposed to. (This is measured by the specific absorption rate — the rate at which the body absorbs radio frequency energy — and the current limit for cellphones is 1.6 watts of energy per kilogram of tissue. The whole-body threshold is a SAR value of 0.08 watts per kilogram, and the tower radiation limit is 10 watts per square meter.)

Jump up ^ Repacholi MH, Lerchl A, Röösli M, Sienkiewicz Z, Auvinen A, Breckenkamp J, d'Inzeo G, Elliott P, Frei P, Heinrich S, Lagroye I, Lahkola A, McCormick DL, Thomas S, Vecchia P (2012). "Systematic review of wireless phone use and brain cancer and other head tumors". Bioelectromagnetics (Systematic review). 33 (3): 187–206. doi:10.1002/bem.20716. PMID 22021071.
Have you ever had headaches, eye problems, insomnia or dizziness because of too much time spent with your electronics? If so, you have probably been exposed to excessive Electromagnetic Radiation emitted from electronic devices such as cell phones and computers. Look after your wellbeing by using the Kyutec Radiation Blocker to wipe out negative waves by 97.17%. Take back control of your daily functional routine today!

Bonus application! In addition to shielding magnetic fields, PaperSHIELD is also quite good at shielding radiowaves (cellphone, wifi, etc). And because of the adhesive backing, it can be adhered to almost any surface you need such as the inside or back of your cellphone case. (Use a near field meter to test RF shielding performance.) Note that it is not transparent, so it can't be used on the touch screen side. Cover the cut edges with sturdy tape as they can be sharp. 36 inches wide. Made in USA.
SafeSleeve - Unlike the competition, SafeSleeve anti-radiation cases for cell phone integrate FCC accredited lab tested shielding technology that can block over 99% of RF radiation and over 92% of ELF radiation. 360 degree phone protection and built-in RFID blocking wallet comes standard and all products are backed by our 30-day, hassle-free return policy. Free expedited shipping in the US and discounted international rates. Click below to order today!
Compatible Phone Models iPhone, Samsung, Motorola and more, This device is designed to work with all cell phones, All dodels, Smart Phones, Flip Phones Apple iPhone 8, Apple iPhone 7, Apple iPhone 6, Apple iPhone 8, 7, 6, Apple iPhone 8, iPhone 7, iPhone 6 iPhone 6 Plus, iPhone 6S Plus, iPhone 7 Plus, iPhone 8 Plus iPhone 6, iPhone 6S, iPhone 7, iPhone 8
Yes, the information transferred between the base unit (the phone’s stationary unit) and the wireless phone’s mobile unit is transferred as radiowave radiation. Therefore, the “precautionary principle” should also be adopted regarding wireless phones. In addition to the guidelines regarding mobile phones, the Ministry of Health recommends regarding wireless phones:
The government’s policies must change. Cell phone users should make their voices heard to prompt the FCC and manufacturers of cell phones and cases to ensure that these accessories never increase and, to the extent possible, decrease, users’ radiation exposure. At minimum, the FCC must take cell phone cases into consideration when it updates its standards to ensure that the use of a case will not expose people to more radiation than its legal SAR limit.  
Phone radiation isn’t like the radiation from, say, a nuclear meltdown. That’s what’s known as “ionizing” radiation — it’s high energy and capable of damaging your DNA, which researchers have determined leads to cancer. Phones emit a much lower energy radiation (lower even than visible light) that’s considered to be “non-ionizing.” We know non-ionizing radiation doesn’t damage DNA the way that ionizing radiation does. But the question remains whether it could still react with the body in some other way that might lead to problems from longterm exposure.

The average radiation level of a Bluetooth earpiece is 0.23 watts per kilogram (W/Kg) according to RF Safe. This is 10 to 100 times higher than the amount of radio frequency (RF) exposure needed to create “leaks” in the blood-brain barrier, allowing for toxins (not to mention the radiation itself!) to pass through into the brain. It’s best to just say NO to Bluetooth!
With our Phone Pouch, you can carry your phone at a safer distance. And with our powerful shielding material that lines the back of the Phone Pouch and deflects up to 99% of cell phone radiation (65-80 dB attenuation of frequencies from 30MHz to 1GHz), you’re exposed to even less harmful cell phone radiation. Our Phone Pouch uses well established science– inside each Pouch is a layer of fabric, interwoven with gossamer thin metallic threads that form a shield to deflect EMF radiation, working much like a Faraday cage.
What the study showed: Most published analyses from this study have shown no statistically significant increases in brain or central nervous system cancers related to higher amounts of cell phone use. One analysis showed a statistically significant, although modest, increase in the risk of glioma among the small proportion of study participants who spent the most total time on cell phone calls. However, the researchers considered this finding inconclusive because they felt that the amount of use reported by some respondents was unlikely and because the participants who reported lower levels of use appeared to have a slightly reduced risk of brain cancer compared with people who did not use cell phones regularly (4–6).
×