Note: Although it is true that cell phones emit low frequency magnetic fields that can be measured in milliGauss, they also emit high frequency microwave radiation which is what all the concern (and publicity) is about, and which the products below are designed to shield. Many clients have contacted us seeking a shield for BOTH magnetic fields and microwaves for their phone. Such a shield does not currently exist. To reduce your exposure to BOTH types of radiation, use an airtube headset and keep the phone itself at a distance.
Some people might consider choosing a phone with a low SAR value. Different models of phones can give off different levels of RF waves. But as noted above, according to the FCC the SAR value is not always a good indicator of a person’s exposure to RF waves during normal cell phone use. One way to get information on the SAR level for a specific phone model is to visit the phone maker’s website. The FCC has links to some of these sites here: www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellular-telephones. If you know the FCC identification (ID) number for a phone model (which can often be found somewhere on the phone or in the user manual), you can also go to the following web address: www.fcc.gov/oet/ea/fccid. On this page, you will see instructions for entering the FCC ID number.
Some products (http://www.safecell.net/reports01.html for example) are tested using a piece of shielding material in a laboratory test jig. These tests legitimately show the amount of radiation which penetrates the shield, but results will be very different when compared to putting a small amount of the same shield on a large transmitter like a cellphone. Remember, the entire phone radiates. Placing a small amount of shielding, even if it is an effective shielding material, only shields that small area at best. Think about this analogy: no light will penetrate a penny as it is a very effective light shield, but it is silly to think that holding a penny up to the sun will put you in darkness.
Take a closer look at the product claims. Many refer to their “shielding technology” and not the product itself. In many cases, the “FCC Certified” labs they cite are actually testing how much RF the raw shielding material can block. They’re testing the materials used in the products. They’re not testing how much RF the actual products block while on a real-world phone.
While an increased risk of brain tumours from the use of mobile phones is not established, the increasing use of mobile phones and the lack of data for mobile phone use over time periods longer than 15 years warrant further research of mobile phone use and brain cancer risk. In particular, with the recent popularity of mobile phone use among younger people, potentially longer lifetime of exposure, WHO has promoted further research on this group and is currently assessing the health impact of RF fields on all studied endpoints. A cohort study in Denmark linked billing information from more than 358,000 cell phone subscribers with brain tumour incidence data from the Danish Cancer Registry. The analyses found no association between cell phone use and the incidence of glioma, meningioma, or acoustic neuroma, even among people who had been cell phone subscribers for 13 or more years. (4)
None of the three cases contain metallic parts, which are known to affect SAR, but all increased the user’s radiation exposure. The effect on radiation exposure would likely vary with each of the hundreds of cases on the market, and each would have to be tested individually to come up with an exact measure. The results in Table 1, however, are believed to reflect the range of radiation increases.

"To expect relief from radiation exposure from one specific device, is nearly impossible. It’s crucial to weigh in the MANY environmental factors; such as, temperature, atmospheric pressure, other radio waves, emissions from other devices, energy shifts from others around you, and Schumann Resonance shifts. Therefore," he explains that “relying on alteration of the environment as a safety precaution is always a game of chance…and signals affect people differently,” which adds another variables in the game of chance.


For those of you who experience (or want to prevent) ES symptoms in your hands when using a computer keyboard, laptop, cell phone or other electronic devices, these gloves form a conductive enclosure and effectively shield radiowaves and electric fields. Soft, light weight, with ribbed cuff, and offering good tactile sensitivity. Polyester fiber is twisted with pure Silver fibers, then knit into a stretchy glove shape in basic gray color. Each glove has a 1.7 mm snap for a ground cord. Fully hand washable and tested for 50 cycles with no appreciable loss of conductivity. All fibers are conductive, achieving resistivity of less than 10 Ohm/sq. These gloves are also used in industry for static control when working with delicate static sensitive components and can even be used for TENS applications. Grounding is not necessary for Faraday Cage shielding effect, but is necessary for static control. Also useful on touch screens like an iGlove. We do not have the ground cord which fits this snap on these gloves. Shielded Gloves:
“I think the overall evidence that wireless radiation might cause adverse health effects is now strong enough that it’s almost unjustifiable for government agencies and scientists not to be alerting the public to the potential hazards,” says David O. Carpenter, M.D., director of the Institute for Health and the Environment at the University at Albany in New York and one of the authors of the recent letter to the U.N. and WHO.
The U.S. government doesn’t seem very troubled, either. The Food and Drug Administration says on its website that research generally doesn’t link cell phones to any health problem. And although the Federal Communications Commission requires manufacturers to include information in user manuals about cell-phone handling, that’s often buried deep in the fine print.
Okay, so Antenna Search isn't really a device but it is a handy service that will tell you how close you are to cellular towers. I punched in my address and found there are SEVENTY-TWO cellular towers and antennas within a 4 mile radius. It lists all the details for each tower – owner, coordinates, installation date, etc. It's a really useful tool for finding out the surrounding risks.
Experts suggest that mobile phone users can take a number of precautions to reduce any possible health risks. Almost all agree that the best step is to keep mobile phone conversations short and to a minimum. Many believe that so-called hands free kits reduce the risks by cutting the amount of electromagnetic radiation entering the brain. They also recommend that users buy phones with external aerials so that it is as far away from the head as possible when in use. Similarly, it is believed that phones with a long talk time are more efficient and produce less powerful emissions. Users are also advised against buying handsets with a high “SAR” value, which means it emits more radiation.
The cell phone industry constantly guards its financial interests, but unfortunately, an unwitting public can be harmed in the process, says Dr. Carlo. “Industry-funded studies in many cases now produce industry-desired outcomes. By tampering with the integrity of scientists, scientific systems and public information steps over the lines of propriety that are appropriate for protecting business interests—especially when the casualty of the interference is public health and safety.”
“We see either no change or very small increases in incidence in some tumor types,” Quinn Ostrom, the Baylor College of Medicine researcher who has been analyzing these cancer trends, explained. “I would be inclined to say this isn’t as much of an increase as you might expect if cellphones were causative [of brain tumors] due to the very sharp way use of these devices has gone up over the last 20 years.”
When called to help with the cell phone issue, Dr. Carlo was working with the FDA on silicone breast implant research. The choice of Dr. Carlo to head WTR seemed unusual to industry observers. An epidemiologist whose expertise was in public health and how epidemic diseases affect the population, he appeared to lack any experience in researching the effects of EMR on human biology. Based on this, a premature conclusion was drawn by many: Dr. Carlo was an “expert” handpicked by the cell phone industry, and therefore his conclusions would only back up the industry’s claim that cell phones are safe.
Mobile devices work by sending radio waves in the air. And while the National Cancer Institute has pointed out that the radio-frequency (RF) energy cell phone emits is low, it does not discount the possible long term health risks it poses. Some of the most recent smartphones (such as the iPhone 7 in particular), release a higher level of radiation than older cellphones; and with people spending more and more time on their devices, it’s only a matter of time before adverse effects might catch up.
Apple has designed the 3D touch screens on newer models of the iPhone such as iPhone 6S, iPhone 6S Plus, iPhone 7 and iPhone 7 Plus models to have adjustable screen sensitivity. If your phone is acting unexpectedly when closing the cover of your case, this can be easily solved by adjusting the sensitivity of the touchscreen in your phone settings. Go to Settings > General > Accessibility > 3D Touch. You can either turn this feature completely OFF or set the sensitivity slider to FIRM to make the the 3D touch screen less sensitive.
There is only one legitimate method of measuring cell phone radiation recognized by every major health authority and government in the world as well as by the cell phone industry itself, referred to as "SAR". SAR testing measures the "Specific Absorption Rate" of radiation at multiple depths and locations on the head and body in order to quantify how much radiation is actually penetrating it with and without certain safety devices. You can see a SAR test of the R2L device by watching the video below.
Among the hundreds of smartphone cases available for iPhone and a bevy of popular Android phones, there are some that claim to reduce the amount of radiation your body absorbs when you have the handset close to your body. Pong Research is a US brand that offers a range of products fitting this description, as is Cellsafe, a company based in Victoria, Australia.
SafeSleeve for the iPhone 6 and 6s is the industry leading cell phone radiation protector. Our anti-radiation shielding technology has been tested in an FCC certified lab to block over 99% of RF radiation and over 92% of ELF radiation. Simply open the flap to answer, and re-close when speaking to be protected from potentially harmful radiation. The technology will also block radiation when storing in your pocket, just position the front flap to face your body. Rugged and double protective case includes an inner silicone shell to hold your phone in place and a reinforced outer case with magnetic latch to hold it closed. Convenient built-in cell phone case wallet allows you to carry up to 4 cards and/or cash with RFID protection. Leave the bulky wallet at home and carry everything in one lightweight package. Enjoy the peace of mind of knowing you are protected by lab tested shielding technology with the added convenience of a built in case, RFID blocker wallet and stand!
The 13-country INTERPHONE study, the largest case-control study done to date, looked at cell phone use among more than 5,000 people who developed brain tumors (gliomas or meningiomas) and a similar group of people without tumors. Overall, the study found no link between brain tumor risk and the frequency of calls, longer call time, or cell phone use for 10 or more years. There was a suggestion of a possible increased risk of glioma, and a smaller suggestion of an increased risk of meningioma, in the 10% of people who used their cell phones the most. But this finding was hard to interpret because some people in the study reported implausibly high cell phone use, as well as other issues. The researchers noted that the shortcomings of the study prevented them from drawing any firm conclusions, and that more research was needed.
It’s easy to call any case a product designed to block smartphone radiation.  What you need to look for is credible, quantifiable claims that highlight a case’s ability to reduce your exposure to the harmful radiation. Look for relevant  certifications from credible organizations (such as FCC accredited laboratories) that will vouch for product claims, and read product reviews online.
Once the surface is completely dry, the surface will have a visible residue remaining on the glass. Take the same microfiber and remove the residue by rubbing the surface until it is shiny and smear free. Do not use any other alcohol or cleaning agent on the glass and apply a new layer of the Ti22 Liquid Titanium Shield every 6-12 months depending on how heavy you use the phone or tablet.

We used a few measuring devices to test and see if this product actually blocks radiation and RFID, including a very sophisticated EMF reader. I am glad to say that this is actually a very effective way to reduce radiation. It is most effective on the front side, and when you have it closed and latched, there is very little exposure - only along the top, side and bottom opening.
According to the FTC, there is no scientific proof that so-called shields significantly reduce exposure from electromagnetic emissions. Products that block only the earpiece – or another small portion of the phone – are totally ineffective because the entire phone emits electromagnetic waves. Such shields "may interfere with the phone's signal, cause it to draw even more power to communicate with the base station, and possibly emit more radiation."[47] The FTC has enforced false advertising claims against companies that sell such products.[48]
“One thing all these conditions have in common is a disruption, to varying degrees, of intercellular communication. When we were growing up, TV antennas were on top of our houses and such waves were up in the sky. Cell phones and Wi-Fi have brought those things down to the street, integrated them into the environment, and that’s absolutely new. The recognition mechanism, where protein vibration sensors on the cell membrane pick up a signal and interpret it as an invader, only works because the body recognizes something it’s never seen before.”

We began by getting a baseline of ambient RF in the room at the location of our testing. We then recorded a baseline of the cellphone RF while on an active call with no case. And finally, we measured the reduction in that baseline (still on the active call) using a variety of different cases and RF reducing products – all at the same set distance from the phone.
Mobile phones emit radiofrequency energy, a form of non-ionizing electromagnetic radiation, which can be absorbed by tissues close to the phone. The amount of radiofrequency energy a mobile phone user is exposed depend on many factors as the technology of the phone, the distance between the phone and the user, the extent and type of mobile phone use and the user’s distance from cell phone towers. (2)

The energy of electromagnetic radiation is determined by its frequency; ionizing radiation is high frequency, and therefore high energy, whereas non-ionizing radiation is low frequency, and therefore low energy. The NCI fact sheet Electromagnetic Fields and Cancer lists sources of radiofrequency radiation. More information about ionizing radiation can be found on the Radiation page.
×