Homeopathic remedies, credit cards and passports with chips, and electronic equipment can all be compromised by exposure to electromagnetic fields. The EMP Can™ is a great air-tight way to store these items and protect them from outside EMF influences including low grade EMP. Shields both radiofrequency and magnetic fields by 95% or more. All metal construction, nice wide mouth and quick-close latch keep contents secure.

3. A lab setting is the only legitimate way to show the effectiveness of our technology for a few main reasons: one, a controlled source is the only way to conduct a scientific study. Note that the controlled source that we used was specifically designed to simulate emissions from wireless electronics (RF and ELF emissions of various frequencies). Two, ambient levels in a non-controlled environment will affect readings, rendering the results inaccurate. Three, at-home equipment such as the meter used in the video is not suitable for the types of emissions by a wireless device, nor are they reliable.
While the Federal Communication Commission limits how much radiofrequency radiation can come out of your cellphone, the Food and Drug Administration can have a say about whether those limits are safe. So the FDA asked the National Toxicology Program (NTP), a division within the National Institutes of Health, to investigate. Based on the NTP’s results, as well as hundreds of other studies, the FDA is still confident that the current limits on cellphone radiation are safe, according to a statement from Jeffrey Shuren, the director of the FDA’s Center for Devices and Radiological Health.
EMP Faraday Bags are designed to protect against damaging EMP current, static discharge, microwave transmission, RFID snooping and moisture damage. Protect your sensitive electronics (laptops, cellphones, iPads etc), precious memories (flash drives, floppy disks, tape recordings, etc) homeopathic remedies and medications, passports, credit cards and other devices from damage and spying. Could make all the difference if there is an EMP event or solar flare. Opening can be heat sealed with a hot iron for security reasons or long term storage. Manufacturer recommends that you “nest” items inside multiple layers of protection (double bagging) for best results.

This 2009 meta-analysis, published in the Journal of Clinical Oncology, looked at 23 case-control studies of the risk of both malignant and benign tumors from mobile phone use. When the authors included all 23, they found no increased risk of tumors. When they crunched certain subsets of the data — like looking only at studies that were blinded, or people who used cellphones for 10 or more years — they did find increases in tumor risks. Confusingly, when they divided up the analysis by tumor type, they found no increase in risk for glioma and acoustic neuroma, and a decrease in risk of meningioma.
There are alternate technologies that can be considered when looking to reduce cell phone radiation exposure which we don’t use. Why don’t we use them? Incorporating technologies such as antennas into a case can greatly reduce outgoing cell phone radiation levels when close to the cell tower, but not totally. If farther away, the cell phone signal levels increase, as does the radiation exposure to the body, possibly to unacceptable output power levels. This design does not reduce radiation exposure from the WiFi and Bluetooth RF because cell phones do not have the capacity to reduce their power levels whether or not an antenna is present. Maybe just as important, this design does not have the shielding capacity for ELF emissions which have the same dangers as the RF emissions. Other device attachments like buttons and stickers are minimally effective to totally ineffective, with no scientific basis. In short, there are no other technologies capable of up to eliminating all of the many potentially harmful cell phone emissions from hitting the body.
Apple has designed the 3D touch screens on newer models of the iPhone such as iPhone 6S, iPhone 6S Plus, iPhone 7 and iPhone 7 Plus models to have adjustable screen sensitivity. If your phone is acting unexpectedly when closing the cover of your case, this can be easily solved by adjusting the sensitivity of the touchscreen in your phone settings. Go to Settings > General > Accessibility > 3D Touch. You can either turn this feature completely OFF or set the sensitivity slider to FIRM to make the the 3D touch screen less sensitive.
Stick on anti-radiation protection shields etc are often made of metal which may block signal and prevent reliable mobile phone communications with signal towers. Mobile phones recognise the potential for a dropped signal and actually increase power to compensate. The result is a fast draining battery and an even higher radiation output as a result of using the product (an exception to this are shields that are placed in between the phone and the user as these do not impede signal to cell towers to any significant degree)
Limit your (and your children’s) cell phone use. This is one of the most obvious ways to limit your exposure to RF waves from cell phones. You may want to use your cell phone only for shorter conversations, or use it only when a conventional phone is not available. Parents who are concerned about their children’s exposure can limit how much time they spend on the phone.

As in the NTP study, Ramazzini investigators detected statistically elevated rates of heart schwannomas in male rats at the highest dose. They also had weaker findings linking RF exposure to cancer of glial cells in the brain, which were limited to females. Ronald Melnick, a retired NTP toxicologist who designed the NTP study, says a measure of consistency between the two studies is important, because “reproducibility in science increases our confidence in the observed results.”

Stereo Hands-Free Headset with a gold plated 3.5mm, 3 band plug. Sporty lightweight design, this headset provides clear stereo sound quality comfortably to your ears. The convenient microphone allows you to make and receive calls at the touch of a button. Compatible with all universal 3.5mm headphone jacks. Can be used with Ferrite Snap Bead to further reduce RF exposure.
A large, long-term study has been comparing all of the people in Denmark who had a cell phone subscription between 1982 and 1995 (about 400,000 people) to those without a subscription to look for a possible increase in brain tumors. The most recent update of the study followed people through 2007. Cell phone use, even for more than 13 years, was not linked with an increased risk of brain tumors, salivary gland tumors, or cancer overall, nor was there a link with any brain tumor subtypes or with tumors in any location within the brain.

Use a corded home phone whenever possible, to minimize the need for a cell phone. Cordless home phones emit RF, so replace cordless phones with corded home phones. One initial step is to unplug the electrical cord of the cordless phone base station when the phone is not in use, because otherwise that base station will emit RF nonstop. Note: you can plug a corded phone handset or corded headset into your VoIP connection.  
We did not simply measure energy coming from the front of the case which is the area of the case where the phone would be "shielded" from radiation. If we had taken readings with a directional meter, specifically measuring energy coming from only the front or flap cover where the shielding material is, we assume as the manufacturers claim, that we would have seen a drop in the radiation readings.
Anti-radiation or radiation blocking or phone shield cases. Do they Work? SafeSleeve, DefenderShield, Vest, Alara, Pong, Reach and ShieldMe  and other EMF protection phone cases claim to block the radiation from your cellphone or smartphone. Anti-radiation cellphone case brands make enticing claims like this: ". . .eliminate up to 99% of the harmful radiation coming from the phone!"

No special wiring or installation is required. Phone includes volume control, speed dial, redial, speakerphone and hold features. Now with caller ID feature as well! Does NOT have answering machine. Phone can also be used in normal fashion by those not affected by EMF. Color is black, phone color and styles may vary. The phone itself does not have any special shielding nor EMF reduction technology. The whole benefit is that it has the jack for the special air tube headset.
It’s also possible that longer-term studies and cancer incidence tracking will find larger cancer effects in another five or 10 years — or that how we use cellphones is evolving such that the devices may cause cancer in ways these studies didn’t account for. (These days, many people text instead of talking, and hold their cellphones in their pockets but not on their heads and necks.) That’s why some people look to animal studies to supplement our understanding of the potential biological effects of cellphones.
Radiation is all around us. Power lines, appliances, and electronic devices all emit electromagnetic frequencies. One source that many of us keep close, perhaps too close, are cell phones, tablets, and other mobile devices. They all use radio frequency (RF) electromagnetic energy, a form of non-ionizing radiation, to communicate. Research has shown that this type of radiation is not benign or harmless to the human body, especially children. Exposure to cell phone and Wifi radiation has been linked to fatigue, dizziness, mental fog, and even worse. As a result, the demand for products that reduce exposure to device radiation is on the rise. In fact, "How can I protect myself from cell phone radiation? What do you recommend?" is a question we get all the time. So, to help, I wanted to offer my thoughts on five products I've found that I believe are worth a look if you're interested in reducing your exposure to cell phone and mobile device radiation.

In order to protect the population living around base stations and users of mobile handsets, governments and regulatory bodies adopt safety standards, which translate to limits on exposure levels below a certain value. There are many proposed national and international standards, but that of the International Commission on Non-Ionizing Radiation Protection (ICNIRP) is the most respected one, and has been adopted so far by more than 80 countries. For radio stations, ICNIRP proposes two safety levels: one for occupational exposure, another one for the general population. Currently there are efforts underway to harmonise the different standards in existence.[26]
If you're looking for ways to limit your exposure to the electromagnetic emissions from your cell phone, know that, according to the FTC, there is no scientific proof that so-called shields significantly reduce exposure from these electromagnetic emissions. In fact, products that block only the earpiece – or another small portion of the phone – are totally ineffective because the entire phone emits electromagnetic waves. What's more, these shields may interfere with the phone's signal, cause it to draw even more power to communicate with the base station, and possibly emit more radiation.

I hope anyone with a damaged RF safe accessory takes the time to call the phone number on the top of RF Safe’s website. The hard plastic cases in six colors with flip covers shielded by hand at RF safe are part of each cases product lifecycle – the case shown in review is a well-tested 1st gen case. Hard plastic case with shielding applied by hand.
Released in 1993 as a joint creation of IBM and BellSouth, this was the first smartphone. A fax machine, a PDA, a pager and a mobile phone, the IBM Simon featured no physical keys, but used a touchscreen and optional stylus. Amazingly, it included applications such as games, email, a notepad, calculator, world clock, address book and a calendar. It only sold in the United States, for $899.
The authors of these studies noted that the results were preliminary and that possible health outcomes from changes in glucose metabolism in humans were unknown. Such inconsistent findings are not uncommon in experimental studies of the biological effects of radiofrequency electromagnetic radiation in people (4). Some factors that can contribute to inconsistencies across such studies include assumptions used to estimate doses, failure to consider temperature effects, and lack of blinding of investigators to exposure status.