Open the “Step 2” packet and remove the cloth and rub the glass surface with the Ti22 Liquid Titanium Shield Nano liquid treated wipe which will coat the surface with the protective Nano liquid. The liquid needs to be applied for at least 90 seconds rubbing every part of the glass. Pushing gently into the glass to absorb the advanced formula. You can also use your finger to rub the liquid into the glass and don’t forget to apply to the camera lens and back-glass if you have a glass back. Allow the Ti22 Liquid Titanium Shield liquid to dry for at least 60-90 seconds before handling. Wash your hands carefully after the treatment.
Manufacturers conduct government-required certification tests using a bare phone, set to transmit at maximum power, with no accessories. The recorded maximum SAR is reported to the FCC and listed in the phone’s manual. A phone tested with accessories under the same conditions can produce a higher SAR because the materials surrounding the antenna can affect the amount of radiation that reaches and is absorbed by the user’s body. A case can influence both the overall amount of emitted radiation and how it is directed.
Please research info supplied by Dr Patrick Flanagan on the One Radio Show last November? He said during the interview that Ferric Oxide Crystals have the same earth Schumann Resonance and can be easily and cheaply bought as Jewellers Rouge. You can simply add some to clear nail varnish and dot all your electricals with it. To neutralise a Smart Meter you should paint the wall in between. I know it works and within a few days of doing this plus painting stones and throwing them (gifting) in close prox of mobile masts black helicopters started harassing me!
Wow so glad I read this article tonight. I have been suspicious of my tablet and phone and in my car – I was experiencing tingling and some irregular pain in odd areas of the body. When I was in my car is when I noticed it – then I realized the same thing would happen when I was reading on my tablet. I just had the discussion with my husband as the body does have an electrical field around it the EMP’s are interrupting that field and damaging the body., which is exactly what I suspected. I also recently read an article that two college girls conducted a “test” project they put a cell phone in one room with and tray of seedlings in soil and put the same tray in another room, very carefully monitoring both room with the exact same temperatures etc. And I believe they let the plants grow for over a week. In the room with the cell phone the seeds had not even sprouted and in the room without the cell phone the seed sprouted and the plants were at least and inch in growth – that is a simple but proven test that cell phones interrupt cellular growth and damage cells. Thank you to all who commented here. I do have to look up what is EHS. Also have to get this info to my daughter who gets headaches.

In order to protect the population living around base stations and users of mobile handsets, governments and regulatory bodies adopt safety standards, which translate to limits on exposure levels below a certain value. There are many proposed national and international standards, but that of the International Commission on Non-Ionizing Radiation Protection (ICNIRP) is the most respected one, and has been adopted so far by more than 80 countries. For radio stations, ICNIRP proposes two safety levels: one for occupational exposure, another one for the general population. Currently there are efforts underway to harmonise the different standards in existence.[26]
He believes the FDA should put out guidance based on the results of the rat studies. “I would think it would be irresponsible to not put out indications to the public,” Melnick says. “Maintain a distance from this device from your children. Don’t sleep with your phone near your head. Use wired headsets. This would be something that the agencies could do right now.”
So what do you do when you need a wireless radiation emitting device but you want to limit the exposure to the people? Perhaps you use a wireless baby monitor, have a cordless phone base station, or you sleep with your cell phone on your nightstand. Maybe there is a wifi router right next to you at work or school. RadiaFence is the answer. It’s a free-standing, semi-transparent microwave barrier that you can put almost anywhere you need. It blocks most of the radiation emitted in one direction by “casting a shadow” (typically 70-90% reduction), while still allowing the wireless device to work. Like sitting in the shade on a sunny day. Portable, inexpensive, attractive. And it couldn’t be easier to use. If you like, you can add a decorative photo or warning sign to change the appearance. Available in 5 styles. Pick the sizes which meet your needs. Style may differ from images.
The U.S. Food and Drug Administration (FDA) notes that studies reporting biological changes associated with radiofrequency radiation have failed to be replicated and that the majority of human epidemiologic studies have failed to show a relationship between exposure to radiofrequency radiation from cell phones and health problems. The FDA, which originally nominated this exposure for review by the NTP in 1999, issued a statement on the draft NTP reports released in February 2018, saying “based on this current information, we believe the current safety limits for cell phones are acceptable for protecting the public health.” FDA and the Federal Communications Commission share responsibility for regulating cell phone technologies.

Pong’s research indicates that badly designed cell phone cases can partially block a phone’s antenna, making the device work harder to transmit signals. Due to gaps in the FCC’s cell phone regulations, a phone worn right next to the body and enclosed by a case that obstructs the antenna could expose the user to more radiation than the FCC’s legal limit.


But not everyone is unconcerned. In May 2015, a group of 190 independent scientists from 39 countries, who in total have written more than 2,000 papers on the topic, called on the United Nations, the World Health Organization, and national governments to develop stricter controls on cell-phone radiation. They point to growing research—as well as the classification of cell-phone radiation as a possible carcinogen in 2011 by the International Agency for Research on Cancer, part of the WHO—suggesting that the low levels of radiation from cell phones could have potentially cancer-causing effects.
Another way to think about the situation is to consider the steady state power emission of .02 Watts and ask how long it would take to heat up your body by one degree Celsius if your entire volume was exposed. Take your body mass to be 100 kg and approximate it as being composed entirely of entirely of water. If all of the radiation was absorbed and went into heating you up (which it isn’t), it would take 20900000 seconds (specific heat*mass*1 degree/power) or 241 days to heat you up by one degree. Fortunately, you have metabolic processes in your body, or possibly air conditioning, to mitigate this heating.
Your phone sends radiofrequency, or RF, waves from its antenna to nearby cell towers, and receives RF waves to its antenna from cell towers when you make a call or text or use data. The frequency of a cell phone’s RF waves falls between those emitted by FM radios and those from microwave ovens, all of which are considered “non-ionizing” forms of radiation. That means that—unlike radiation from a nuclear explosion, a CT scan, or a standard X-ray—the radiation from your phone does not carry enough energy to directly break or alter your DNA, which is one way that cancer can occur. (FM radios and microwaves don’t raise alarms, in part because they aren’t held close to your head when in use and because microwave ovens have shielding that offers protection.)
Apple has designed the 3D touch screens on newer models of the iPhone such as iPhone 6S, iPhone 6S Plus, iPhone 7 and iPhone 7 Plus models to have adjustable screen sensitivity. If your phone is acting unexpectedly when closing the cover of your case, this can be easily solved by adjusting the sensitivity of the touchscreen in your phone settings. Go to Settings > General > Accessibility > 3D Touch. You can either turn this feature completely OFF or set the sensitivity slider to FIRM to make the the 3D touch screen less sensitive.
An analysis of data from all 13 countries participating in the Interphone study reported a statistically significant association between intracranial distribution of tumors within the brain and self-reported location of the phone (7). However, the authors of this study noted that it is not possible to draw firm conclusions about cause and effect based on their findings.
×