The FCC provides information about the specific absorption rate (SAR) of cell phones produced and marketed within the last 1 to 2 years. The SAR corresponds with the relative amount of radiofrequency radiation absorbed by the head of a cell phone user (47). Consumers can access this information using the phone’s FCC ID number, which is usually located on the case of the phone, and the FCC’s ID search form.

Asked about his own cellphone use, Dr. Bucher said he had never been a heavy user but, in light of the study, was now “a little more aware” of his usage. On long calls, he said, he tried to use earbuds or find other ways “of increasing the distance” between the cellphone and his body, in keeping with advice issued to consumers about how to lower their exposure.


An analysis of data from NCI's Surveillance, Epidemiology, and End Results (SEER) Program evaluated trends in cancer incidence in the United States. This analysis found no increase in the incidence of brain or other central nervous system cancers between 1992 and 2006, despite the dramatic increase in cell phone use in this country during that time (22).
Read the “fine print” from the manufacturer’s instruction manual which tells users to put a distance between the phone and your head and body. These fine print warnings range  from a few millimeters to almost an inch. The fine print warnings on other wireless devices (such as Wi-Fi routers, wireless printers, home cordless phone base stations and baby monitors) generally state the distance should be at least 20 cm, or about 8 inches. If people are closer than the manufacturer stated separation distance, then they can be exposed to RF levels that violate the US government FCC limits for this radiation.
The World Health Organisation (WHO) released a fact sheet about these issues, shortly after the IARC re-classification, entitled "Electromagnetic fields and public health: mobile phones". The fact sheet points to the findings of the IARC and describes some of the known short-term and long-term effects of phone use, but ultimately, it lands on the side of where the most conclusive evidence exists:
Most cellphone shielding products are designed to reduce radiation to the user while still allowing the phone to function. This means that some radiation can still get to the phone… and some radiation can still get out of the phone! But sometimes you need to completely kill the signal. The RF Kill Box is a full-metal shielding jacket with very high shielding performance.
Using a speaker/personal speakerphone or earplug (not wireless) during conversation - distancing the mobile phone from the user’s body reduces his exposure to the radiowave radiation. Therefore, keep the mobile phone at a distance from the body (do not carry it on the body, such as in the belt, pocket or on a neck strap). Obviously, reducing the amount and duration of calls on the mobile phone is another simple measure to reduce exposure.
The cellular phone industry was born in the early 1980s, when communications technology that had been developed for the Department of Defense was put into commerce by companies focusing on profits. This group, with big ideas but limited resources, pressured government regulatory agencies—particularly the Food and Drug Administration (FDA)—to allow cell phones to be sold without pre-market testing. The rationale, known as the “low power exclusion,” distinguished cell phones from dangerous microwave ovens based on the amount of power used to push the microwaves. At that time, the only health effect seen from microwaves involved high power strong enough to heat human tissue. The pressure worked, and cell phones were exempted from any type of regulatory oversight, an exemption that continues today. An eager public grabbed up the cell phones, but according to Dr. George Carlo, “Those phones were slowly prompting a host of health problems.”
Four years ago -- before I bought my first iPhone -- I wouldn’t buy certain model cell phones because their radiation emission levels were too high. I became obsessed with researching this in the buying process, especially after finding out that a man I knew died of brain cancer and was an early mobile phone user. Suspicion was that the phone caused the cancer.

Unfortunately, regulatory boards do not require third-party phone accessory manufacturers to consider how their product will work in tandem with the smartphone. Neither do governments require smartphone manufacturers to conduct extensive research on whether their SAR will still meet the FCC’s allowable radiation exposure limits when their devices are using a phone case or other 3rd party accessories.


I'm glad I spent the money to get this protection. Again, I consider this an "insurance policy" and hope cell phone radiation is over hyped. However, mounting evidence seems to indicate otherwise, so I feel more comfortable knowing I'm taking proactive steps to protect against a possible health problem I and my family might face in the future from long and close exposure to cell phones close to the body and head.
Instead, we have to rely on “observational” data, tracking people’s real-world cellphone use and their disease incidence. Studies using observational data tend to be weaker, messier, and less clear-cut than experimental studies like RCTs. They can only tell us about associations between phenomena, not whether one thing caused another to happen. So that opens up a lot of the ambiguity we’re going to delve into next.
Limited to rats only, the Ramazzini study tested three doses expressed as the amount of radiation striking the animal’s bodies: either 5, 25 or 50 volts per meter. The exposure measures therefore differed from the absorbed doses calculated during the NTP study. But the Ramazzini scientists also converted their measures to W/kg, to show how the doses compared with RF limits for cell phones and cell towers set by the FCC and the International Commission on Non-Ionizing Radiation Protection; they ranged down to a 1,000 times lower. The exposures began when the rats were fetuses and continued for 19 hours a day until the animals died from natural causes.

Safe Cell Technology is created out of unique material that is permanently encoded with specific signals or frequencies designed to interact with and change the quality of the electromagnetic field (EMF) emitting from cell phones. It converts the electromagnetic energy into low level infrared energy acting as a cell phone radiation protection shield drastically reducing the harmful effects of cell phone radiation.
People can also reduce their exposure by limiting cell-phone use when the cellular signal is weak; when traveling in a high-speed car, bus or train; to stream audio or video; or to download or upload large files. All of these circumstances cause phones to put out higher-than-normal levels of RF energy. Phones also emit RF energy when connected to WiFi or Bluetooth devices, but at lower levels.
Regular battery-powered watches (and all other battery-powered tech, for that matter) also produce some level of EMFs, but that level is far lower than the amount emitted by tech devices that are plugged in, or that receive and transmit information wirelessly. The same rule applies however; if you can turn it off and keep it away from your body, then do so whenever possible.
A study by the Corporate EME Research Laboratory and Motorola Florida Research Laboratories tested 9 different cell phone radiation shields, 5 of which claimed to block 99% of cell phone radiation. The other 4 shields tested claimed to emit a reverse radiation that would cancel out the harmful radiation from cell phones. The study found that all of the radiation shields had no effect on the amount of radiofrequency radiation a cell phone user is exposed to from their phone.[2]
If you want to measure the EMF radiation from your own phone, and know if EMF protection products are working, you should get a quality EMF meter. I highly recommend the new TriField TF2 (read my review) as it’s simple to use, lasts forever, is extremely accurate, and measures all three types of EMF radiation. If you’re looking for a low-cost EMF meter I really like the Meterk (read my review).
Many mobile phone protection stick on shields, chips or buttons make claims to manage the radiation problem in ways that are not verifiable by recognised scientific methods. We have evaluated a number of such products and have found in many cases that many of them simply do not work. On the other hand, our Anti-radiation phone covers, headsets and other solutions offer outstanding levels of protection (up to 100%) and are proven by verifiable SAR testing in accredited laboratories. In fact we are proud to say that our range includes some of the most effective radiation reducing solutions available anywhere in the world.

I debated whether to give it 3 or 4 stars: on features, speed of delivery, and quality of construction, it definitely deserves 4 stars. If I can measure and verify the emf reduction, then I will change the rating to 5 stars. Since the whole point of using it is to block excess em radiation, I can't really give it 5 stars without more proof that it really does so.
In addition, the findings might be influenced by the fact that the study subjects owned cell phones that were in some cases manufactured two decades ago. The way we use cell phones and the networks they’re operated on have also changed since then. Last, cancer can develop slowly over decades, yet the studies have analyzed data over only about a five- to 20-year span.
Limit your (and your children’s) cell phone use. This is one of the most obvious ways to limit your exposure to RF waves from cell phones. You may want to use your cell phone only for shorter conversations, or use it only when a conventional phone is not available. Parents who are concerned about their children’s exposure can limit how much time they spend on the phone.
Another thing that many people fail to realize is that EMF-emitting devices such as laptop computers are exceptionally more harmful when plugged in as opposed to when they’re operating on battery power alone. Tests have shown that working on a laptop that’s plugged in can result in up to 100 times more radiation exposure than using one that’s operating on battery power.
Bonus application! In addition to shielding magnetic fields, PaperSHIELD is also quite good at shielding radiowaves (cellphone, wifi, etc). And because of the adhesive backing, it can be adhered to almost any surface you need such as the inside or back of your cellphone case. (Use a near field meter to test RF shielding performance.) Note that it is not transparent, so it can't be used on the touch screen side. Cover the cut edges with sturdy tape as they can be sharp. 36 inches wide. Made in USA.
These cases work by redirecting the electromagnetic radiation (EMR) that is produced by phones, away from the user. All phones produce EMR when connected to the mobile network, and the effect of this energy is measured as a Specific Absorption Rate, or SAR: a measurement describing the radiation absorbed by kilogram of tissue. Government regulations in Australia dictate that all phones in Australia must emit a SAR less than 2 W/kg under the worst case scenario, and while all phones comply, most modern phones emit, at most, only half of this safe level, or approximately 1 W/kg.
So, you've read the numerous studies about the potentially harmful health effects of cell phone radiation and you are ready to something about it. Of course, you can use your phone sparingly and put it in airplane mode when possible, use a wired headset or speakerphone when on calls, and never store it in your pocket. However, is that realistic? How about for your kids? In today's world, with our increasing dependence on our cell phones, probably not!
Cooper's prototype arrived on the market a decade later at the staggering price of $3,995. Designed by Rudy Krolopp, it was known as the Motorola DynaTAC 8000X, or simply "the brick.” Featuring 20 large buttons and a long rubber antenna, it measured about 11 inches high, weighed almost 2 pounds, provided one hour of battery life and could store 30 phone numbers.
Forced to take action, the cell phone industry set up a non-profit organization, Wireless Technology Research (WTR), to perform the study. Dr. Carlo developed the program outline and was asked to head the research. Oversight of the issue was charged to the FDA, though it could have and probably should have gone to the Environmental Protection Agency (EPA), which fought hard for jurisdiction. But the industry had enough influence in Washington to get whatever overseer it wanted. It simply didn’t want to tangle with EPA because, says Dr. Carlo, “… the EPA is tough.”
And don’t get me started on the immersion headgear they are coming out with for gaming. Anyway, I figured I would get a cell phone eventually and use it just as a phone, no bells and whistles. However after this article and a podcast on privacy, where I learned your cell phone is a tracking device, this goes to the towers, I’ve decided on a Definite no.
Specific Absorption Rate (SAR) is an indicator for calculating the level of radiation absorbed in the body. This indicator represents the rate of energy absorption by the tissue and is expressed in units of Watt/kg. The Consumer Protection Regulations (information on non-ionizing radiation from mobile phones) of 2002, stipulate the duty to label the product, specifying the radiation level of the phone’s model and the maximum permitted radiation level. This regulation allows to compare the emitted radiation level between different instruments and to take this into consideration when weighing the factors determining the choice of a new instrument at the time of its purchase.
The studies are notable for their sizes. Researchers at the National Toxicology Program, a federal interagency group under the National Institutes of Health, tested 3,000 rats and mice of both sexes for two years—the largest investigation of RF radiation and cancer in rodents ever undertaken in the U.S. European investigators at the Ramazzini Institute in Italy were similarly ambitious; in their recent study they investigated RF effects in nearly 2,500 rats from the fetal stage until death.
The authors of these studies noted that the results were preliminary and that possible health outcomes from changes in glucose metabolism in humans were unknown. Such inconsistent findings are not uncommon in experimental studies of the biological effects of radiofrequency electromagnetic radiation in people (4). Some factors that can contribute to inconsistencies across such studies include assumptions used to estimate doses, failure to consider temperature effects, and lack of blinding of investigators to exposure status.
×