RadiArmor’s anti-radiation material blocks over 99% of EMF radiation. However, since covering your entire phone with this material would result in no reception, only the front cover is lined with this material. This still provides an effective EMF reduction of 91% with no loss in reception. The front cover has a hole for sound to pass through so that you can close the case and talk at the same time.
These cases work by redirecting the electromagnetic radiation (EMR) that is produced by phones, away from the user. All phones produce EMR when connected to the mobile network, and the effect of this energy is measured as a Specific Absorption Rate, or SAR: a measurement describing the radiation absorbed by kilogram of tissue. Government regulations in Australia dictate that all phones in Australia must emit a SAR less than 2 W/kg under the worst case scenario, and while all phones comply, most modern phones emit, at most, only half of this safe level, or approximately 1 W/kg.
The frequency of radiofrequency electromagnetic radiation ranges from 30 kilohertz (30 kHz, or 30,000 Hz) to 300 gigahertz (300 GHz, or 300 billion Hz). Electromagnetic fields in the radiofrequency range are used for telecommunications applications, including cell phones, televisions, and radio transmissions. The human body absorbs energy from devices that emit radiofrequency electromagnetic radiation. The dose of the absorbed energy is estimated using a measure called the specific absorption rate (SAR), which is expressed in watts per kilogram of body weight.