2. Our products are designed to provide an anti-radiation barrier between the device and the body. This way, the devices are still usable and able to send and receive signal out of the non-shielded side while shielding the EMF away from the body. Because of this, you will only see a reduction in EMF levels on the shielded side of the device. The test you have conducted shows the highest levels from anywhere around the device.
Moving the meter around the case, we detect readings on the side, back and front of the case. We use the multi-directional TES 593 meter which measures 10 MHz to 8GHz. We use the unit of micro-watts per square centimeter, which looks like this little symbol: μW/cm² and we use it on the max setting which shows the maximum measured value. In non-science speak: the highest level of RF we see, which could be from the back the side or the front.
That’s because cell phones emit electromagnetic fields (EMFs) or electromagnetic radiation, which has the potential to damage the cells in the body. In fact, the International Agency for Research on Cancer classifies EMFs from cell phones as possible carcinogens. EMFs can interfere with the body’s natural electrical system and disrupt sleep, immune system function, hormone production, and the healing process. Kevin Byrne, president of EMF Solutions, also points out the simultaneous increase in conditions such as chronic pain, depression, anxiety, chronic fatigue syndrome, and Alzheimer’s disease and the significant rise in EMF exposure.
Limited to rats only, the Ramazzini study tested three doses expressed as the amount of radiation striking the animal’s bodies: either 5, 25 or 50 volts per meter. The exposure measures therefore differed from the absorbed doses calculated during the NTP study. But the Ramazzini scientists also converted their measures to W/kg, to show how the doses compared with RF limits for cell phones and cell towers set by the FCC and the International Commission on Non-Ionizing Radiation Protection; they ranged down to a 1,000 times lower. The exposures began when the rats were fetuses and continued for 19 hours a day until the animals died from natural causes.
Using a speaker/personal speakerphone or earplug (not wireless) during conversation - distancing the mobile phone from the user’s body reduces his exposure to the radiowave radiation. Therefore, keep the mobile phone at a distance from the body (do not carry it on the body, such as in the belt, pocket or on a neck strap). Obviously, reducing the amount and duration of calls on the mobile phone is another simple measure to reduce exposure.
Yes, cell phones emit Electromagnetic Fields (EMF) and direct exposure to these emissions can be a health risk. There are two types of EMF radiation emitted from cell phones: Extremely Low Frequency (ELF) radiation and Radio Frequency (RF) radiation (which includes cellular signals, WiFi and Bluetooth). More and more, particularly in recent years, scientific studies have confirmed that these EMF exposure can adversely modify the biological operations of the body. In more serious cases, exposure to EMFs can lead to tumors, reduce sperm count and other serious health concerns.
(Some common flaws in these studies: The summaries of the evidence weren’t comprehensive, the researchers often didn’t look at the quality of the studies they found, and they failed to do other simple things that would limit bias from creeping in. They also relied on case-control studies, a poor method to determine causality — more on that soon.) So we didn’t include these eight reviews in our analysis.
The BlocSock is a small, 3”x5½”, lightweight case that's only designed for cell phones, not tablets or laptops. One side is a normal fabric to ensure reception. The other side has a rectangular, metallic mesh to shield RF radiation. It's recommended that you keep the side with the shielding material between the phone and your body. When making or receiving calls, keep the shielding between your head and the phone. It can also be moved into a smaller “kangaroo style” pouch during calls. It's effective, and tests show that it reduces RF exposure 96%. For more information, check out the SAR research test or watch this video.
They determined there is “clear evidence” that male rats exposed to high levels of radio frequency radiation — typical of 2G and 3G networks when the study was designed — developed heart schwannomas. There was also “some evidence” of brain and adrenal gland tumors, again in the male rats, but the exposed female rats, and male and female mice, did not have consistent patterns of disease.
But scientists disagree on how real—or how serious—these risks really are, and studies have not established any definitive links between health problems and radiofrequency (RF) energy, the type of radiation emitted by cell phones. “This document is intended to provide guidance for people who want to reduce their own and their families’ exposure to RF energy from cell phones,” the guidelines state, “despite this uncertainty.”
There is only one legitimate method of measuring cell phone radiation recognized by every major health authority and government in the world as well as by the cell phone industry itself, referred to as "SAR". SAR testing measures the "Specific Absorption Rate" of radiation at multiple depths and locations on the head and body in order to quantify how much radiation is actually penetrating it with and without certain safety devices. You can see a SAR test of the R2L device by watching the video below.
If you want to use your phone for talking, then the idea is that you keep it flipped over the front of the screen – that way you’re blocking radiation on both the front and back. The speaker still works with the cover on, because there’s a small hole for that. The inevitable drawback of this is that you have to flip the cover open in order to access your keypad.
Radiofrequency radiation is a form of electromagnetic radiation. Electromagnetic radiation can be categorized into two types: ionizing (e.g., x-rays, radon, and cosmic rays) and non-ionizing (e.g., radiofrequency and extremely low frequency, or power frequency). Electromagnetic radiation is defined according to its wavelength and frequency, which is the number of cycles of a wave that pass a reference point per second. Electromagnetic frequencies are described in units called hertz (Hz).