Mobile phones emit radiofrequency energy, a form of non-ionizing electromagnetic radiation, which can be absorbed by tissues close to the phone. The amount of radiofrequency energy a mobile phone user is exposed depend on many factors as the technology of the phone, the distance between the phone and the user, the extent and type of mobile phone use and the user’s distance from cell phone towers. (2)
Dr. Carlo, however, refused to be an easy target. He quickly recruited a group of prominent scientists to work with him, bulletproof experts owning long lists of credentials and reputations that would negate any perception that the research was predestined to be a sham. He also created a Peer Review Board chaired by Harvard University School of Public Health’s Dr. John Graham, something that made FDA officials more comfortable since, at the time, the agency was making negative headlines due to the breast implant controversy. In total, more than 200 doctors and scientists were involved in the project.

Specific Absorption Rate is an indicator of how much EMF radiation body tissue absorbs when you’re using a cell phone and is one way to measure and compare the harm of different devices. In this article, I wanted to provide a resource to compare and contrast the SAR levels of many popular phones and talk a bit about what Specific Absorption Rate is, and how we can use it.
Radio base licensing procedures have been established in the majority of urban spaces regulated either at municipal/county, provincial/state or national level. Mobile telephone service providers are, in many regions, required to obtain construction licenses, provide certification of antenna emission levels and assure compliance to ICNIRP standards and/or to other environmental legislation.
With the background levels of information-carrying radio waves dramatically increasing because of the widespread use of cell phones,Wi-Fi, and other wireless communication, the effects from the near and far-fields are very similar. Overall, says Dr. Carlo, almost all of the acute and chronic symptoms seen in electrosensitive patients can be explained in some part by disrupted intercellular communication. These symptoms of electrosensitivity include inability to sleep, general malaise, and headaches. Could this explain the increase in recent years of conditions such as attention-deficit hyperactivity disorder (ADHD), autism, and anxiety disorder?
Moving the meter around the case, we detect readings on the side, back and front of the case. We use the multi-directional TES 593 meter which measures 10 MHz to 8GHz. We use the unit of micro-watts per square centimeter, which looks like this little symbol: μW/cm² and we use it on the max setting which shows the maximum measured value. In non-science speak: the highest level of RF we see, which could be from the back the side or the front. 
The government’s policies must change. Cell phone users should make their voices heard to prompt the FCC and manufacturers of cell phones and cases to ensure that these accessories never increase and, to the extent possible, decrease, users’ radiation exposure. At minimum, the FCC must take cell phone cases into consideration when it updates its standards to ensure that the use of a case will not expose people to more radiation than its legal SAR limit.  
Note: Although it is true that cell phones emit low frequency magnetic fields that can be measured in milliGauss, they also emit high frequency microwave radiation which is what all the concern (and publicity) is about, and which the products below are designed to shield. Many clients have contacted us seeking a shield for BOTH magnetic fields and microwaves for their phone. Such a shield does not currently exist. To reduce your exposure to BOTH types of radiation, use an airtube headset and keep the phone itself at a distance.
The U.S. government doesn’t seem very troubled, either. The Food and Drug Administration says on its website that research generally doesn’t link cell phones to any health problem. And although the Federal Communications Commission requires manufacturers to include information in user manuals about cell-phone handling, that’s often buried deep in the fine print.
A large prospective (forward-looking) study of nearly 800,000 women in the UK examined the risk of developing brain tumors over a 7-year period in relation to self-reported cell phone use at the start of the study. This study found no link between cell phone use and brain tumors overall or several common brain tumor subtypes, but it did find a possible link between long-term cell phone use and acoustic neuromas.
There are fears that the electromagnetic radiation emitted from mobile phone handsets may harm health. In particular, there have been claims that it could affect the body’s cells, brain or immune system and increase the risk of developing a range of diseases from cancer to Alzheimer’s. Laboratory tests on mice have shown that radiation from mobile phones can have an adverse effect on their overall health. It is still not clear whether those findings can be applied directly to humans. A study by scientists in Finland, published in 2002, suggested that the electromagnetic radiation did affect human brain tissue. But they played down their findings saying more research was needed to see if the effects were the same in living people. Another study by scientists in Sweden, also published in 2002, claimed to have found a link between analogue mobile phones and brain tumours. It suggested users of “first generation” phones had a 30% higher risk of developing tumours than people who did not. However, the findings were controversial and there have been no similar studies into the effects of modern GSM phones. There have also been reports of people suffering from headaches, fatigue and loss of concentration after using their mobile phones. However, these claims have not been scientifically substantiated.
Some people might consider choosing a phone with a low SAR value. Different models of phones can give off different levels of RF waves. But as noted above, according to the FCC the SAR value is not always a good indicator of a person’s exposure to RF waves during normal cell phone use. One way to get information on the SAR level for a specific phone model is to visit the phone maker’s website. The FCC has links to some of these sites here: www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellular-telephones. If you know the FCC identification (ID) number for a phone model (which can often be found somewhere on the phone or in the user manual), you can also go to the following web address: www.fcc.gov/oet/ea/fccid. On this page, you will see instructions for entering the FCC ID number.
This is a 2 pieces of plastic sandwiched together by glue. Don't believe me? Take it apart. This item works no better than the existing case on your phone. If you are that concerned with cellphone radiation, you should be equally concerned about the cheap plastic and toxic glue that this is comprised of. Also know the fact that they've stolen $25 from your wallet when you purchase this hokey product...Technology at it's finest.

Once the surface is completely dry, the surface will have a visible residue remaining on the glass. Take the same microfiber and remove the residue by rubbing the surface until it is shiny and smear free. Do not use any other alcohol or cleaning agent on the glass and apply a new layer of the Ti22 Liquid Titanium Shield every 6-12 months depending on how heavy you use the phone or tablet.
Our tests wre conducted with three RF meters, set at fixed position next to the iPhone. Our primary meter was the Gigahertz Solutions HFE 59B, a professional RF instrument. We also used a TES 593 (Mid-Range Consumer Grade Instrument) and the Acousticom 2 (Low-Range Consumer Grade Instrument) to compare/confirm the increases and decreases in RF and for visual reference.
"Someone claiming they need to reduce [the safe SAR level of 2 W/kg] by 90-percent — they just have no evidence to make that claim, and they are actually playing on the fact that people will be concerned enough about the possible cancer risk, although they don't understand that there's no sufficient data yet to make a statement about an actual cancer risk," said Professor Olver.
But, dear reader, don’t think we’ve reached a “case closed” moment: Unfortunately, even the best evidence on cellphones and brain tumors is far from ideal. Remember, these cohort studies are still observational research — not experimental studies like RCTs. That means they can’t tell us about causation, and there are still many ways they could be biased.
Independently tested DefenderShield technology uses a patent-pending sophisticated layering of separate non-toxic, human safe materials processed for maximum radiation blocking efficiency. Each material has unique and targeted radiation shielding characteristics designed to work in unison to up to eliminate all radiation emissions from 0 to 10 GHz.
SafeSleeve Anti Radiation Case: Safe Sleeve website says they integrate FCC accredited independent lab tested "shielding technology" in their products. There are many links to "SafeSleeve, Is it a Scam?" and "Does SafeSleeve work?" online, but if you follow those links you'll find they go to the actual SafeSleeve site where the question of SafeSleeve protection is addressed.  You'll see in this demonstration that the radiation level was higher with the SafeSleeve Case on.

Transmitters, including cell phones, emit radio signals on more than the assigned frequency. These other signals on other frequencies are “harmonics” and/or “noise” and/or “dirty” signals from less than optimal transmitters, antennae, and/or resonating frequencies emitted from metallic objects in close proximity to the transmitter, like the other components of the cell phone.
Since use of mobile phones by children began at a later stage compared to use by adults, the effects of exposure to mobile phones in this population have not yet been investigated. Considering their health sensitivity, the long life expectancy in the young population (probably involving the accumulation of significant exposure and development of morbidity in the long-run), and ethical issues involved in decision making regarding the population of minors, additional precaution is required in this population. Therefore, the Ministry of Health advises parents to reduce children’s exposure to mobile phones as much as possible, consider the age they start using them, reduce the amount of time mobile phones are used, and in any event, make sure they use earphones (not wireless) or a speaker when using the mobile phone.
For those of you who experience (or want to prevent) ES symptoms in your hands when using a computer keyboard, laptop, cell phone or other electronic devices, these gloves form a conductive enclosure and effectively shield radiowaves and electric fields. Soft, light weight, with ribbed cuff, and offering good tactile sensitivity. Polyester fiber is twisted with pure Silver fibers, then knit into a stretchy glove shape in basic gray color. Each glove has a 1.7 mm snap for a ground cord. Fully hand washable and tested for 50 cycles with no appreciable loss of conductivity. All fibers are conductive, achieving resistivity of less than 10 Ohm/sq. These gloves are also used in industry for static control when working with delicate static sensitive components and can even be used for TENS applications. Grounding is not necessary for Faraday Cage shielding effect, but is necessary for static control. Also useful on touch screens like an iGlove. We do not have the ground cord which fits this snap on these gloves. Shielded Gloves:
 I purchased two different color cases and I was surprised when I received it because the inner case was different than described in some of the reviews. But when I looked at the Amazon listing, I didn’t realize that the case has been updated and I’m pleasantly surprised. The inner case is a soft, flexible plastic that doesn’t seem like it would break at all. I borrowed an EMF reader from a friend and the case works as described. I’m very happy with the cases and I’m glad that I purchased one for my boyfriend too! I definitely recommend this case!
Some products (http://www.safecell.net/reports01.html for example) are tested using a piece of shielding material in a laboratory test jig. These tests legitimately show the amount of radiation which penetrates the shield, but results will be very different when compared to putting a small amount of the same shield on a large transmitter like a cellphone. Remember, the entire phone radiates. Placing a small amount of shielding, even if it is an effective shielding material, only shields that small area at best. Think about this analogy: no light will penetrate a penny as it is a very effective light shield, but it is silly to think that holding a penny up to the sun will put you in darkness.
Specifically, we looked for studies that measured rates of acoustic neuromas, gliomas, meningiomas, and thyroid cancers. We also narrowed our search to studies that looked at the effect of radio-frequency radiation originating from an actual cellphone, rather than experimental equipment. We did this because we wanted evidence that could apply to real life, not specific laboratory settings or hypothetical outcomes.

INTEGRITY: Many manufactures claim near 100% EMF protection, referring to the radiation blocking material, NOT the protection you receive on a call. If you covered your whole phone with EMF blocking material, then you'd have no signal. Our EMF blocking material is used on the front cover only, providing you real EMF protection with no sacrifice in reception.
If you want to use your phone for talking, then the idea is that you keep it flipped over the front of the screen – that way you’re blocking radiation on both the front and back. The speaker still works with the cover on, because there’s a small hole for that. The inevitable drawback of this is that you have to flip the cover open in order to access your keypad.
A few other health concerns have been raised about cell phone use. One has been whether the RF waves from cell phones might interfere with medical devices such as heart pacemakers. According to the FDA, cell phones should not pose a major risk for the vast majority of pacemaker wearers. Still, people with pacemakers may want to take some simple precautions to help ensure that their cell phones don’t cause a problem, such as not putting the phone in a shirt pocket close to the pacemaker.
The U.S. Food and Drug Administration (FDA) notes that studies reporting biological changes associated with radiofrequency radiation have failed to be replicated and that the majority of human epidemiologic studies have failed to show a relationship between exposure to radiofrequency radiation from cell phones and health problems. The FDA, which originally nominated this exposure for review by the NTP in 1999, issued a statement on the draft NTP reports released in February 2018, saying “based on this current information, we believe the current safety limits for cell phones are acceptable for protecting the public health.” FDA and the Federal Communications Commission share responsibility for regulating cell phone technologies.
×