SquareTrade Protection Plans are only valid for new or Amazon certified refurbished products purchased at Amazon in the last 30 days. By purchasing this Protection Plan you agree to the Protection Plan Terms & Conditions (http://www.squaretrade.com/terms-standard). Your Protection Plan Terms & Conditions will be delivered via email within 24 hours of purchase

Take a closer look at the product claims. Many refer to their “shielding technology” and not the product itself. In many cases, the “FCC Certified” labs they cite are actually testing how much RF the raw shielding material can block. They’re testing the materials used in the products. They’re not testing how much RF the actual products block while on a real-world phone.

Use the speaker mode on the phone or a hands-free device such as a corded or cordless earpiece. This moves the antenna away from your head, which decreases the amount of RF waves that reach the head. Corded earpieces emit virtually no RF waves (although the phone itself still emits small amounts of RF waves that can reach parts of the body if close enough, such as on the waist or in a pocket). Bluetooth® earpieces have an SAR value of around 0.001 watts/kg (less than one thousandth the SAR limit for cell phones as set by the FDA and FCC).
The device comes in a variety of forms ranging from the $39 Aries Shield ("a silicon based micro processor that ... decomposes oscillations of electromagnetic fields") to the $249 Aires Defender Utility (which "has two next generation 9 core silicon based micro processor (sic) that provide universal protection from electromagnetic smog of the broadband frequencies").

Use a corded home phone whenever possible, to minimize the need for a cell phone. Cordless home phones emit RF, so replace cordless phones with corded home phones. One initial step is to unplug the electrical cord of the cordless phone base station when the phone is not in use, because otherwise that base station will emit RF nonstop. Note: you can plug a corded phone handset or corded headset into your VoIP connection.  


As far as which of those match your device, that really depends on your carrier. AT&T, Verizon, Sprint, and T-Mobile all have different frequencies. To further complicate things, in one geographic region of the country they may use one frequency, while another is used elsewhere. It all depends on which FCC licenses they have the rights to in each region.
There are alternate technologies that can be considered when looking to reduce cell phone radiation exposure which we don’t use. Why don’t we use them? Incorporating technologies such as antennas into a case can greatly reduce outgoing cell phone radiation levels when close to the cell tower, but not totally. If farther away, the cell phone signal levels increase, as does the radiation exposure to the body, possibly to unacceptable output power levels. This design does not reduce radiation exposure from the WiFi and Bluetooth RF because cell phones do not have the capacity to reduce their power levels whether or not an antenna is present. Maybe just as important, this design does not have the shielding capacity for ELF emissions which have the same dangers as the RF emissions. Other device attachments like buttons and stickers are minimally effective to totally ineffective, with no scientific basis. In short, there are no other technologies capable of up to eliminating all of the many potentially harmful cell phone emissions from hitting the body.

I don’t understand why only the lab tests are accurate. I just purchases two SafeSleeve cases and tested them myself with the same meter they use on their website in the promotional video. I made sure there were no other electronics nearby and I had the meter at zero without the cell phone next to it. I did not get the results they show in the video. I tested the phone with and without the case and it did not make any difference. The meter was peaking no mater what, with the flap opened or closed. If the meter is picking up radiation through the case, then my head is too. SafeSleeve is willing to reimburse me for the cases, but I am concerned that this might be a case of false advertising.
That mystery probably stokes fears about cellphone radiation instead of soothing them, though — in part because of how we in the media cover the rare and frightening. We’ve seen the same thing with fear over nuclear power plants, according to a paper published in Science in the 1980s by psychologist Paul Slovic. “Because nuclear risks are perceived as unknown and potentially catastrophic, even small accidents will be highly publicized and may produce large ripple effects,” Slovic wrote.
Four years ago -- before I bought my first iPhone -- I wouldn’t buy certain model cell phones because their radiation emission levels were too high. I became obsessed with researching this in the buying process, especially after finding out that a man I knew died of brain cancer and was an early mobile phone user. Suspicion was that the phone caused the cancer.
We couldn't find one legit EMF expert online or anywhere else that would recommend a radiation blocking case or anti-radiation case. Not the Environmental Health Trust or Magda Havas, or Joel Moskowitz, in fact his site, safeEMR cautions against scams and claims for radiation protection.  So if a so-called "EMF expert" is recommending any kind of anti-radiation case, they probably aren't that much of an expert. 
The DefenderShield® Universal Cell Phone EMF Radiation Protection & RFID Blocking Wallet Case blocks up to virtually 100% of harmful EMF cell phone radiation from the face of your cell phone. This handcrafted case utilizes multi-layered, state-of-the-art radiation-shielding technology in the front cover while offering a soft microfiber interior and elegant vegan leather exterior resistive to scratching, staining and the accidental drop.
But manipulation by the industry had begun almost immediately at the start of research. While Dr. Carlo and his team had never defined their research as being done to prove the safety of cell phones, the industry internally defined it as an insurance policy to prove that phones were safe. From the outset, what was being said by the cell phone industry in public was different from what was being said by the scientists behind closed doors.
The government’s policies must change. Cell phone users should make their voices heard to prompt the FCC and manufacturers of cell phones and cases to ensure that these accessories never increase and, to the extent possible, decrease, users’ radiation exposure. At minimum, the FCC must take cell phone cases into consideration when it updates its standards to ensure that the use of a case will not expose people to more radiation than its legal SAR limit.  
"To expect relief from radiation exposure from one specific device, is nearly impossible. It’s crucial to weigh in the MANY environmental factors; such as, temperature, atmospheric pressure, other radio waves, emissions from other devices, energy shifts from others around you, and Schumann Resonance shifts. Therefore," he explains that “relying on alteration of the environment as a safety precaution is always a game of chance…and signals affect people differently,” which adds another variables in the game of chance.

Please research info supplied by Dr Patrick Flanagan on the One Radio Show last November? He said during the interview that Ferric Oxide Crystals have the same earth Schumann Resonance and can be easily and cheaply bought as Jewellers Rouge. You can simply add some to clear nail varnish and dot all your electricals with it. To neutralise a Smart Meter you should paint the wall in between. I know it works and within a few days of doing this plus painting stones and throwing them (gifting) in close prox of mobile masts black helicopters started harassing me!
If you're looking for ways to limit your exposure to the electromagnetic emissions from your cell phone, know that, according to the FTC, there is no scientific proof that so-called shields significantly reduce exposure from these electromagnetic emissions. In fact, products that block only the earpiece – or another small portion of the phone – are totally ineffective because the entire phone emits electromagnetic waves. What's more, these shields may interfere with the phone's signal, cause it to draw even more power to communicate with the base station, and possibly emit more radiation.
Jump up ^ Christopher Newman, et al. v Motorola, Inc., et al. (United States District Court for the District of Maryland) ("Because no sufficiently reliable and relevant scientific evidence in support of either general or specific causation has been proffered by the plaintiffs, as explained below, the defendants’ motion will be granted and the plaintiffs’ motion will be denied."). Text
I debated whether to give it 3 or 4 stars: on features, speed of delivery, and quality of construction, it definitely deserves 4 stars. If I can measure and verify the emf reduction, then I will change the rating to 5 stars. Since the whole point of using it is to block excess em radiation, I can't really give it 5 stars without more proof that it really does so.
While an increased risk of brain tumours from the use of mobile phones is not established, the increasing use of mobile phones and the lack of data for mobile phone use over time periods longer than 15 years warrant further research of mobile phone use and brain cancer risk. In particular, with the recent popularity of mobile phone use among younger people, potentially longer lifetime of exposure, WHO has promoted further research on this group and is currently assessing the health impact of RF fields on all studied endpoints. A cohort study in Denmark linked billing information from more than 358,000 cell phone subscribers with brain tumour incidence data from the Danish Cancer Registry. The analyses found no association between cell phone use and the incidence of glioma, meningioma, or acoustic neuroma, even among people who had been cell phone subscribers for 13 or more years. (4)
There are alternate technologies that can be considered when looking to reduce cell phone radiation exposure which we don’t use. Why don’t we use them? Incorporating technologies such as antennas into a case can greatly reduce outgoing cell phone radiation levels when close to the cell tower, but not totally. If farther away, the cell phone signal levels increase, as does the radiation exposure to the body, possibly to unacceptable output power levels. This design does not reduce radiation exposure from the WiFi and Bluetooth RF because cell phones do not have the capacity to reduce their power levels whether or not an antenna is present. Maybe just as important, this design does not have the shielding capacity for ELF emissions which have the same dangers as the RF emissions. Other device attachments like buttons and stickers are minimally effective to totally ineffective, with no scientific basis. In short, there are no other technologies capable of up to eliminating all of the many potentially harmful cell phone emissions from hitting the body.
The ultra thin (1mm) RadiCushion by Cellsafe slips into the cell phone case and redirects radiation away from the face of the phone. It's available in black or white but not recommended for use with aluminum or metallic cell phone cases. Test results show a SAR reduction of 96%. A slightly thicker (2mm) RadiCushion is available for iPad and iPad mini; it adheres to the back of the device and also provides SAR reductions of 96%. Visit their website for more information or watch this independent test which shows an 80% reduction and also compares it to the BlocSock:
According to the WHO, the "precautionary principle" is "a risk management policy applied in circumstances with a high degree of scientific uncertainty, reflecting the need to take action for a potentially serious risk without awaiting the results of scientific research." Other less stringent recommended approaches are prudent avoidance principle and as low as reasonably practicable. Although all of these are problematic in application, due to the widespread use and economic importance of wireless telecommunication systems in modern civilization, there is an increased popularity of such measures in the general public, though also evidence that such approaches may increase concern.[35] They involve recommendations such as the minimization of cellphone usage, the limitation of use by at-risk population (such as children), the adoption of cellphones and microcells with as low as reasonably practicable levels of radiation, the wider use of hands-free and earphone technologies such as Bluetooth headsets, the adoption of maximal standards of exposure, RF field intensity and distance of base stations antennas from human habitations, and so forth.[citation needed] Overall, public information remains a challenge as various health consequences are evoked in the literature and by the media, putting populations under chronic exposure to potentially worrying information.[36]
Stick on anti-radiation protection shields etc are often made of metal which may block signal and prevent reliable mobile phone communications with signal towers. Mobile phones recognise the potential for a dropped signal and actually increase power to compensate. The result is a fast draining battery and an even higher radiation output as a result of using the product (an exception to this are shields that are placed in between the phone and the user as these do not impede signal to cell towers to any significant degree)
That’s because cell phones emit electromagnetic fields (EMFs) or electromagnetic radiation, which has the potential to damage the cells in the body. In fact, the International Agency for Research on Cancer classifies EMFs from cell phones as possible carcinogens. EMFs can interfere with the body’s natural electrical system and disrupt sleep, immune system function, hormone production, and the healing process. Kevin Byrne, president of EMF Solutions, also points out the simultaneous increase in conditions such as chronic pain, depression, anxiety, chronic fatigue syndrome, and Alzheimer’s disease and the significant rise in EMF exposure.
EWG believes that cell phone testing procedures should include cases and other accessories, whether supplied by the phone manufacturer or a third party. Since these cases and accessories have no other use and have the potential to influence the phone’s transmitting and receiving activity and the amount of radiation that a user might encounter, they fall within FCC’s authority.
In December, 2006, an epidemiological study on cell phone dangers published in the Journal of the National Cancer Institute sent the media into a frenzy.10 Newspaper headlines blared: “Danish Study Shows Cell Phone Use is Safe,” while TV newscasters proclaimed, “Go ahead and talk all you want—it’s safe!” The news seemed to be a holiday gift for cell phone users. But unfortunately, it’s a flawed study, funded by the cell phone industry and designed to bring a positive result. The industry’s public relations machine is working in overdrive to assure that the study get top-billing in the media worldwide.

But, like the human studies, one can pick apart the NTP studies too. For one thing, the animals experienced cell phone radiation that was different from what humans live with. As Bucher said in a statement, “In our studies, rats and mice received radio frequency radiation across their whole bodies. By contrast, people are mostly exposed in specific local tissues close to where they hold the phone. In addition, the exposure levels and durations in our studies were greater than what people experience.”


So you are careful about NOT putting your radiation emitting mobile near your head. That’s good. But think about this: what body parts get the radiation when you put the thing on your pocket, bra, hat, purse, holster or elsewhere on your body? Now your vital and sometimes private organs are basically in contact with the source of the microwaves, getting the largest dose possible. Pocket Sticker is a high performance shielding patch that you stick onto your clothing which reflects that radiation away from your body.

Cooper's prototype arrived on the market a decade later at the staggering price of $3,995. Designed by Rudy Krolopp, it was known as the Motorola DynaTAC 8000X, or simply "the brick.” Featuring 20 large buttons and a long rubber antenna, it measured about 11 inches high, weighed almost 2 pounds, provided one hour of battery life and could store 30 phone numbers.

However, there have been some studies that have shown that rats can develop a specific type of brain tumor, called a schwannoma, if they're subjected to prolonged radiofrequency radiation. These studies examined thousands of rats and mice, and exposed them to a variety of radiations — everything from "near-field" (which is what you get holding a phone to your ear) to "far-field" (which is what you get walking through everyone's Wi-Fi signals at Starbucks).

The Specific Absorption Rate that the FCC, with input from many other government institutions, decided on, is defined using an average of a 30-minute phone call with the cell phone held directly to the ear. Since modern cell phones are used in all sorts of manners, ie speakerphone, scrolling through social media, browsing the web, etc, a base had to be set.
Great article. I learned several things that I will put into use with my electronic technology. Thank you. There are numerous EMF/EMR blockers that you can stick on your cell phones, computers, (even microwave ovens for people who still use these). Each brand I’ve researched has the same goal but they’re all different. Are some brands more effective than others? If you can recommend some good brands, I would appreciate your advice. What are good features to look for when selecting the EMF blockers?
When it comes to ionizing radiation — which we’re exposed to in X-rays, in CT scans, and during air travel — we know it’s powerful enough to damage the DNA, and that repeated DNA damage over time can cause cancer. That’s why, for example, you’re not supposed to get too many X-rays in your lifetime. (In case you were wondering, there’s no precise number on how many X-rays are too many — but the Food and Drug Administration suggests keeping track and avoiding any that seem unnecessary.)
Tame the radiation! We know how much you love your iPhone. Now enjoy it without radiating your head. Stylish black handset plugs into iPhone 4, 4S, 5, 6 providing clear sound without bending your neck. Allows you to keep the phone at a distance from your body, reducing radiation by 95% or more. Less echo than some hands free sets, it also offers an answer key and volume control. 3.5mm plug. 4-foot coiled cord. Great for home, office, or travel. Makes a great gift too!
It also means regulators need to make sure their policies reflect new levels of exposure. The Federal Communications Commission currently oversees cellphone safety and sets the limits for how much radiation people should be exposed to. (This is measured by the specific absorption rate — the rate at which the body absorbs radio frequency energy — and the current limit for cellphones is 1.6 watts of energy per kilogram of tissue. The whole-body threshold is a SAR value of 0.08 watts per kilogram, and the tower radiation limit is 10 watts per square meter.)
I debated whether to give it 3 or 4 stars: on features, speed of delivery, and quality of construction, it definitely deserves 4 stars. If I can measure and verify the emf reduction, then I will change the rating to 5 stars. Since the whole point of using it is to block excess em radiation, I can't really give it 5 stars without more proof that it really does so.
This substantially changes the debate on whether cell phone use is a cancer risk. Up until this point, the federal government and cell phone manufacturers operated on the assumption that cell phones cannot by their very nature cause cancer, because they emit non-ionizing radiation. Whereas ionizing radiation—the kind associated with x-rays, CT scans, and nuclear power plants, among others—definitely causes cancer at high enough doses, non-ionizing radiation was believed to not emit enough energy to break chemical bonds. That meant it couldn’t damage DNA, and therefore couldn’t lead to mutations that cause cancer.
I love these radiation protection cases. It's a great size for my iphone, and I can even talk on the phone with the phone inside the pouch - perfect sound quality. The only thing I would recommend is that a snap be added to the opening -- it is slippery material. You can tell the company took care in producing a quality product -- it is constructed very well. I recommend this product to cell phone users! Oh, I also got this so quickly!! It arrived within 2-3 days of ordering, and it comes from the UK!! Amazing service!!
The exact source of radiation in a cell phone is from the transmitter, a device located near the antenna that converts audio data into electromagnetic waves. The amount of radiation a cell phone can emit is limited by legal restrictions in the U.S., Canada and Europe. Additionally, the average radiation levels of most mobile phones are available to the public, courtesy of the Federal Communications Commission in the U.S.
EWG is calling on the FCC to update its testing guidelines to take account of the widespread use of smartphone cases. Such action is critical because mounting scientific studies have raised serious questions about the safety of cell phone radiation exposure over the short and long term. In the absence of meaningful action by the Commission, EWG offers consumers tips on how to reduce their exposure to cell phone radiation.
Great article. I learned several things that I will put into use with my electronic technology. Thank you. There are numerous EMF/EMR blockers that you can stick on your cell phones, computers, (even microwave ovens for people who still use these). Each brand I’ve researched has the same goal but they’re all different. Are some brands more effective than others? If you can recommend some good brands, I would appreciate your advice. What are good features to look for when selecting the EMF blockers?
Some people might consider choosing a phone with a low SAR value. Different models of phones can give off different levels of RF waves. But as noted above, according to the FCC the SAR value is not always a good indicator of a person’s exposure to RF waves during normal cell phone use. One way to get information on the SAR level for a specific phone model is to visit the phone maker’s website. The FCC has links to some of these sites here: www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellular-telephones. If you know the FCC identification (ID) number for a phone model (which can often be found somewhere on the phone or in the user manual), you can also go to the following web address: www.fcc.gov/oet/ea/fccid. On this page, you will see instructions for entering the FCC ID number.
This 2009 meta-analysis, published in the Journal of Clinical Oncology, looked at 23 case-control studies of the risk of both malignant and benign tumors from mobile phone use. When the authors included all 23, they found no increased risk of tumors. When they crunched certain subsets of the data — like looking only at studies that were blinded, or people who used cellphones for 10 or more years — they did find increases in tumor risks. Confusingly, when they divided up the analysis by tumor type, they found no increase in risk for glioma and acoustic neuroma, and a decrease in risk of meningioma.
Safe Cell Technology is created out of unique material that is permanently encoded with specific signals or frequencies designed to interact with and change the quality of the electromagnetic field (EMF) emitting from cell phones. It converts the electromagnetic energy into low level infrared energy acting as a cell phone radiation protection shield drastically reducing the harmful effects of cell phone radiation.

But according to the FCC, comparing SAR values between phones can be misleading. The listed SAR value is based only on the phone operating at its highest power, not on what users would typically be exposed to with normal phone use. The actual SAR value during use varies based on a number of factors, so it’s possible that a phone with a lower listed SAR value might actually expose a person to more RF energy than one with a higher listed SAR value in some cases.
“When symptoms are not addressed comprehensively– for example, using symptom amelioration without simultaneous elimination of exposure – cell membrane adverse reaction and damage continue to occur while the patient is assuming the cause of the problem has been eliminated. This lulls patients into a false sense of security, causing them to aggravate their exposures through the increased use of their wireless devices. When the damage reaches a critically harmful level, even the symptom amelioration can no longer be sustained by the damaged cells.”
When it comes to ionizing radiation — which we’re exposed to in X-rays, in CT scans, and during air travel — we know it’s powerful enough to damage the DNA, and that repeated DNA damage over time can cause cancer. That’s why, for example, you’re not supposed to get too many X-rays in your lifetime. (In case you were wondering, there’s no precise number on how many X-rays are too many — but the Food and Drug Administration suggests keeping track and avoiding any that seem unnecessary.)
This substantially changes the debate on whether cell phone use is a cancer risk. Up until this point, the federal government and cell phone manufacturers operated on the assumption that cell phones cannot by their very nature cause cancer, because they emit non-ionizing radiation. Whereas ionizing radiation—the kind associated with x-rays, CT scans, and nuclear power plants, among others—definitely causes cancer at high enough doses, non-ionizing radiation was believed to not emit enough energy to break chemical bonds. That meant it couldn’t damage DNA, and therefore couldn’t lead to mutations that cause cancer.

As in the NTP study, Ramazzini investigators detected statistically elevated rates of heart schwannomas in male rats at the highest dose. They also had weaker findings linking RF exposure to cancer of glial cells in the brain, which were limited to females. Ronald Melnick, a retired NTP toxicologist who designed the NTP study, says a measure of consistency between the two studies is important, because “reproducibility in science increases our confidence in the observed results.”
×