The DefenderShield® Universal Cell Phone EMF Radiation Protection & RFID Blocking Wallet Case blocks up to virtually 100% of harmful EMF cell phone radiation from the face of your cell phone. This handcrafted case utilizes multi-layered, state-of-the-art radiation-shielding technology in the front cover while offering a soft microfiber interior and elegant vegan leather exterior resistive to scratching, staining and the accidental drop.
Some people might consider choosing a phone with a low SAR value. Different models of phones can give off different levels of RF waves. But as noted above, according to the FCC the SAR value is not always a good indicator of a person’s exposure to RF waves during normal cell phone use. One way to get information on the SAR level for a specific phone model is to visit the phone maker’s website. The FCC has links to some of these sites here: www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellular-telephones. If you know the FCC identification (ID) number for a phone model (which can often be found somewhere on the phone or in the user manual), you can also go to the following web address: www.fcc.gov/oet/ea/fccid. On this page, you will see instructions for entering the FCC ID number.
Cordless Phones - Most homes have cordless phones. Many of these cordless phones operate within 2.4GHz 5.8 GHz. These phones are high in electromagnetic radiation particularly when they get over 2.4 GHz. At this level they are operating at the same frequency as a cell phone. We suggest using Safe Cell on your cordless phone as well as your cell phone.
In 2011, the American Cancer Society (ACS) stated that the IARC classification means that there could be some cancer risk associated with radiofrequency radiation, but the evidence is not strong enough to be considered causal and needs to be investigated further. Individuals who are concerned about radiofrequency radiation exposure can limit their exposure, including using an ear piece and limiting cell phone use, particularly among children.
to find the minimum distance the federal government recommends that your cell phone must be away from your body. Keeping it closer than the designated distance can result in a violation of the FCC Exposure Limit. Exceeding FCC levels is proven to result in burns, sterility and brain damage. Learn more about fine print instructions and see all the FCC warnings here.
The guidelines recommend keeping phones away from the body when they’re not in use—in a backpack, for example, rather than a pocket—and sleeping with phones away from the bed. People may also choose to use speakerphone or a headset to make calls, rather than holding the phone to their heads. (They should remove their headsets when they’re not in use, though, as these devices also emit small amounts of RF frequency.)
"Someone claiming they need to reduce [the safe SAR level of 2 W/kg] by 90-percent — they just have no evidence to make that claim, and they are actually playing on the fact that people will be concerned enough about the possible cancer risk, although they don't understand that there's no sufficient data yet to make a statement about an actual cancer risk," said Professor Olver.
DefenderShield Cellphone Radiation Case also claims independent testing and says in their website: That a "sophisticated layering of separate non-toxic, human safe materials processed for maximum radiation blocking efficiency. Each material has unique and targeted radiation-shielding characteristics designed to work in unison to eliminate all radiation emissions from 0 to 10 GHZ and Defender Shield technology refracts, conducts and finally absorbs all these potentially harmful emissions." In this demonstration, the radiation level measured when DefendeShield case was on is still quite a bit above the level of exposure that I would recommend. I personally do not recommend-holding a phone with a shielding case to your head as the DefenderShield website shows a young woman doing as she demonstrates the product.
None of the three cases contain metallic parts, which are known to affect SAR, but all increased the user’s radiation exposure. The effect on radiation exposure would likely vary with each of the hundreds of cases on the market, and each would have to be tested individually to come up with an exact measure. The results in Table 1, however, are believed to reflect the range of radiation increases.
Most cellphone shielding products are designed to reduce radiation to the user while still allowing the phone to function. This means that some radiation can still get to the phone… and some radiation can still get out of the phone! But sometimes you need to completely kill the signal. The RF Kill Box is a full-metal shielding jacket with very high shielding performance.
The guidelines created a measure of the rate that body tissue absorbs radiation during cell phone use called the specific absorption rate (SAR). The SAR for cell phone radiation was set at a maximum of 1.6 watts of energy absorbed per kilogram of body weight. The limit was set due to the thermal effects of cell phone radiation (all RF radiation can heat human body tissue at high enough levels) - it was not set to mitigate other biological effects cell phone radiation might have such as DNA damage or cancer.
Don’t rely on a “radiation shield” or other products claiming to block RF energy, electromagnetic fields, or radiation from cell phones. According to the U.S. Federal Trade Commission, products that interfere with the phone’s signal may force it to work harder and emit more RF energy in order to stay connected, possibly increasing your exposure. It is best to use wired solutions to reduce RF rather than rely on an untested product.
We’ll see how it holds up, but out of the box this case is wonderful. No problems at all with it interfering with the cameras or the four microphones in the iPhone 7. In fact, my last case must have interfered with the mics because people I call often are now saying the sound is much better on their end, and this is when the case is closed with speakerphone on. // This case is put together nicely. Good stitching, nice texture. I am a vegan so I feel good using it. // I haven’t used the card or money slots so I can’t speak about those. It’s not important to me anyway. // All-in-all I’m very pleased. I was a little apprehensive spending $35 or whatever amount it was, but this case is quality. Hope it blocks the bad stuff like they say it does. I feel the company is very straightforward and honest in their product information and didn’t make outlandish claims. Great case! // Update, 5 months later. Perfect. Not a stitch broken. It’s holding up extremely well. Very pleased.
Mobile devices work by sending radio waves in the air. And while the National Cancer Institute has pointed out that the radio-frequency (RF) energy cell phone emits is low, it does not discount the possible long term health risks it poses. Some of the most recent smartphones (such as the iPhone 7 in particular), release a higher level of radiation than older cellphones; and with people spending more and more time on their devices, it’s only a matter of time before adverse effects might catch up.
Instead, we have to rely on “observational” data, tracking people’s real-world cellphone use and their disease incidence. Studies using observational data tend to be weaker, messier, and less clear-cut than experimental studies like RCTs. They can only tell us about associations between phenomena, not whether one thing caused another to happen. So that opens up a lot of the ambiguity we’re going to delve into next.
“The near field plume is the one we’re most concerned with. This plume that’s generated within five or six inches of the center of a cell phone’s antenna is determined by the amount of power necessary to carry the signal to the base station,” he explains. “The more power there is, the farther the plume radiates the dangerous information-carrying radio waves.”
Our tests wre conducted with three RF meters, set at fixed position next to the iPhone. Our primary meter was the Gigahertz Solutions HFE 59B, a professional RF instrument. We also used a TES 593 (Mid-Range Consumer Grade Instrument) and the Acousticom 2 (Low-Range Consumer Grade Instrument) to compare/confirm the increases and decreases in RF and for visual reference.
Asked about his own cellphone use, Dr. Bucher said he had never been a heavy user but, in light of the study, was now “a little more aware” of his usage. On long calls, he said, he tried to use earbuds or find other ways “of increasing the distance” between the cellphone and his body, in keeping with advice issued to consumers about how to lower their exposure.
The exact source of radiation in a cell phone is from the transmitter, a device located near the antenna that converts audio data into electromagnetic waves. The amount of radiation a cell phone can emit is limited by legal restrictions in the U.S., Canada and Europe. Additionally, the average radiation levels of most mobile phones are available to the public, courtesy of the Federal Communications Commission in the U.S.
My iPhone 6s easily snapped into place. The case is attractive AND I can find my phone more easily than when I had no case. (There have been times when my slim iPhone got lost among a collection of papers. The case makes the phone more visible because of the case color and because it is thicker than the uncased phone.) I like the loop that you can attach to the case if you want to hang it on your wrist. Best of all, I am pleased about the radiation protection.
Wearable tech such as the Apple Watch might as well be called a wearable EMF device. These watches are even worse than mobile phones in that they remain in constant, direct contact with your skin. New York Times columnist Nick Bilton covered this issue in March 2015, noting that constant, low-level radiation from such devices can trigger the formation of cancerous tumors, blood abnormalities, and more.
Bonus application! In addition to shielding magnetic fields, PaperSHIELD is also quite good at shielding radiowaves (cellphone, wifi, etc). And because of the adhesive backing, it can be adhered to almost any surface you need such as the inside or back of your cellphone case. (Use a near field meter to test RF shielding performance.) Note that it is not transparent, so it can't be used on the touch screen side. Cover the cut edges with sturdy tape as they can be sharp. 36 inches wide. Made in USA.
Independently tested DefenderShield® technology uses a patent-pending sophisticated layering of separate non-toxic, human safe exotic materials processed for maximum radiation blocking efficiency. Each material has unique and targeted radiation shielding characteristics designed to work in unison to up to eliminate all radiation emissions from 0 to 10 GHz.
But he cautioned that the exposure levels and durations were far greater than what people typically encounter, and thus cannot “be compared directly to the exposure that humans experience.” Moreover, the rat study examined the effects of a radio frequency associated with an early generation of cellphone technology, one that fell out of routine use years ago. Any concerns arising from the study thus would seem to apply mainly to early adopters who used those bygone devices, not to users of current models.
Jump up ^ For example, Finland "Radiation and Nuclear Safety Authority: Children's mobile phone use should be limited". Finnish Radiation and Nuclear Safety Authority (STUK). 7 January 2009. Archived from the original on 11 January 2010. Retrieved 20 January 2010. and France "Téléphone mobile, DAS et santé" [Mobile telephones, SAR and health] (PDF). Votre enfant et le téléphone mobile [Your child and mobile telephony]. Association Française des Opérateurs Mobiles (AFOM)[French Mobile Phone Operators' Association] et l’Union Nationale des Associations Familiales (UNAF) [National Federation of Family Associations]. 31 January 2007. Retrieved 20 January 2010.
Over time, the number of cell phone calls per day, the length of each call, and the amount of time people use cell phones have increased. Because of changes in cell phone technology and increases in the number of base stations for transmitting wireless signals, the exposure from cell phone use—power output—has changed, mostly lowered, in many regions of the United States (1).