There's a lot of talk in the news these days about whether or not cell phones emit enough radiation to cause adverse health effects. The concern is that cell phones are often placed close to or against the head during use, which puts the radiation in direct contact with the tissue in the head. There's evidence supporting both sides of the argument.

Independently tested DefenderShield® technology uses a patent-pending sophisticated layering of separate non-toxic, human safe exotic materials processed for maximum radiation blocking efficiency. Each material has unique and targeted radiation shielding characteristics designed to work in unison to up to eliminate all radiation emissions from 0 to 10 GHz.
Cables can act as an antenna, especially if they pass close to a strong source of radiofrequency radiation. One study has suggested that if the cable of a hands free mic passes near the phone's antenna, it can pick up some radiation and transmit it to your ear. Our ferrite snap bead is designed to reduce RF radiation in the cable. Made in 2 halves, you simply press it around the hands free wire at any convenient location near the earpiece end. Couldn't be simpler. It is small and lightweight enough to be almost unnoticable, yet powerful enough (50 ohm impedence minimum) to control nasty radiation. These are brand new, top quality and will accommodate wires up to 5 mm (3/16 inch) in diameter. About 1 inch long, grey color. If you are concerned about radiation from your hands free ear mic, this is the answer. Useful from 200-1000 MHz.
Some products (http://www.safecell.net/reports01.html for example) are tested using a piece of shielding material in a laboratory test jig. These tests legitimately show the amount of radiation which penetrates the shield, but results will be very different when compared to putting a small amount of the same shield on a large transmitter like a cellphone. Remember, the entire phone radiates. Placing a small amount of shielding, even if it is an effective shielding material, only shields that small area at best. Think about this analogy: no light will penetrate a penny as it is a very effective light shield, but it is silly to think that holding a penny up to the sun will put you in darkness.
The Pong Case is easy to use and snaps on to activate two built in antenna that draw away radiation. Tests performed by Pong labs and Wired magazine show that Pong cases redirect energy from the face of the cell phone or tablet toward the back of the device, reducing absorption by 67%. While one might think this would interrupt reception, the opposite occurs and reception has actually been observed to increase up to 13%. It fits most major phone brands and Pong also makes a case for the iPad (however it works a little differently and diffuses the energy instead of redirecting). The products come with a 6 month warranty and a 60 day money back guarantee. For more information, visit their website or watch these videos.
“The near field plume is the one we’re most concerned with. This plume that’s generated within five or six inches of the center of a cell phone’s antenna is determined by the amount of power necessary to carry the signal to the base station,” he explains. “The more power there is, the farther the plume radiates the dangerous information-carrying radio waves.”

What are the health effects of mobile phones and wireless radiation? While Australia has led the world in safety standards, including compulsory seat-belt legislation, plain packaging on cigarettes, and product and food disclosure legislation, it falls behind in addressing the significant issues associated with mobile phone use. In this Dean’s Lecture, epidemiologist and electromagnetic radiation expert, Dr Devra Davis, will outline the evolution of the mobile phone and smartphone, and provide a background to the current 19 year old radiation safety standards (SAR), policy developments and international legislation. New global studies on the health consequences of mobile/wireless radiation will be presented, including children’s exposure and risks.


Pong Research also makes cases for the iPad and its technology is arguably better suited for that. Why? Because serving as a stand to prop up your iPad or tablet, it means you don’t really need to hold it. That’s an ideal setup because higher amounts of radiation are going out the back, versus the front of the screen which you are touching with your fingers and palms.
This substantially changes the debate on whether cell phone use is a cancer risk. Up until this point, the federal government and cell phone manufacturers operated on the assumption that cell phones cannot by their very nature cause cancer, because they emit non-ionizing radiation. Whereas ionizing radiation—the kind associated with x-rays, CT scans, and nuclear power plants, among others—definitely causes cancer at high enough doses, non-ionizing radiation was believed to not emit enough energy to break chemical bonds. That meant it couldn’t damage DNA, and therefore couldn’t lead to mutations that cause cancer.
According to the FTC, there is no scientific proof that so-called shields significantly reduce exposure from electromagnetic emissions. Products that block only the earpiece – or another small portion of the phone – are totally ineffective because the entire phone emits electromagnetic waves. Such shields "may interfere with the phone's signal, cause it to draw even more power to communicate with the base station, and possibly emit more radiation."[47] The FTC has enforced false advertising claims against companies that sell such products.[48]
I debated whether to give it 3 or 4 stars: on features, speed of delivery, and quality of construction, it definitely deserves 4 stars. If I can measure and verify the emf reduction, then I will change the rating to 5 stars. Since the whole point of using it is to block excess em radiation, I can't really give it 5 stars without more proof that it really does so.
From the FCC website: "The FCC ID number is usually shown somewhere on the case of the phone or device. In many cases, you will have to remove the battery pack to find the number. Once you have the number proceed as follows. Go to the following Web address: www.fcc.gov/oet/ea/fccid. Once you are there... Enter the FCC ID number (in two parts as indicated: 'Grantee Code' is comprised of the first three characters, the 'Equipment Product Code' is the remainder of the FCC ID). Then click on 'Start Search.' The grant of equipment authorization for this particular ID number should appear. The highest SAR values reported in the equipment certification test data are usually included in the comments section of the grant of equipment certification."
That brings us back to the main question here: Do cellphones cause tumors? We chose to focus this story on cancer risk, since it seems like the most common health concern people have about cellphones. But before we get to the answers, we need to take another (brief) detour to explain how this science has been done with human subjects. To do that, we need to zoom in on a nerdy subject: research methods.
The frequency of radiofrequency electromagnetic radiation ranges from 30 kilohertz (30 kHz, or 30,000 Hz) to 300 gigahertz (300 GHz, or 300 billion Hz). Electromagnetic fields in the radiofrequency range are used for telecommunications applications, including cell phones, televisions, and radio transmissions. The human body absorbs energy from devices that emit radiofrequency electromagnetic radiation. The dose of the absorbed energy is estimated using a measure called the specific absorption rate (SAR), which is expressed in watts per kilogram of body weight.
×