Safe Cell Technology is created out of unique material that is permanently encoded with specific signals or frequencies designed to interact with and change the quality of the electromagnetic field (EMF) emitting from cell phones. It converts the electromagnetic energy into low level infrared energy acting as a cell phone radiation protection shield drastically reducing the harmful effects of cell phone radiation.
✅ PROTECT YOUR HEAD & BODY FROM RADIATION: It is scientifically proven that it’s best to keep your phone away from your body because the radiation exposure often exceeds FCC regulations. That’s why our emf protection cell phone radiation shield will immediately negate symptoms such as headaches, dizziness, memory loss, anxiety, fatigue and much more.

That mystery probably stokes fears about cellphone radiation instead of soothing them, though — in part because of how we in the media cover the rare and frightening. We’ve seen the same thing with fear over nuclear power plants, according to a paper published in Science in the 1980s by psychologist Paul Slovic. “Because nuclear risks are perceived as unknown and potentially catastrophic, even small accidents will be highly publicized and may produce large ripple effects,” Slovic wrote.


There are few if any references to actual studies in published, peer-reviewed journals that support the claim that Aires, or any other, cell phone shield actually works. The "Researches" page contains a superficially impressive list of sciencey-sounding titles and findings supposedly demonstrating the importance of using cell phone shields, all of them in Russia for some reason.
Radio base licensing procedures have been established in the majority of urban spaces regulated either at municipal/county, provincial/state or national level. Mobile telephone service providers are, in many regions, required to obtain construction licenses, provide certification of antenna emission levels and assure compliance to ICNIRP standards and/or to other environmental legislation.
But the 5G signals are weaker at traveling long distances, and weaker signals mean we need more antennas to amplify, or strengthen, the 5G network. According to the New York Times, “Instead of relying on large towers placed far apart, the new signals will come from smaller equipment placed an average of 500 feet apart in neighborhoods and business districts.” They’ll also emit a different kind of higher-frequency radio waves, known as millimeter waves.
EMF Academy is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. EMF Academy also participates in affiliate programs with Clickbank, ShareASale, and other sites. EMF Academy is compensated for referring traffic and business to these companies.
Open the “Step 2” packet and remove the cloth and rub the glass surface with the Ti22 Liquid Titanium Shield Nano liquid treated wipe which will coat the surface with the protective Nano liquid. The liquid needs to be applied for at least 90 seconds rubbing every part of the glass. Pushing gently into the glass to absorb the advanced formula. You can also use your finger to rub the liquid into the glass and don’t forget to apply to the camera lens and back-glass if you have a glass back. Allow the Ti22 Liquid Titanium Shield liquid to dry for at least 60-90 seconds before handling. Wash your hands carefully after the treatment.
There’s a broad range of radiation types, and lots of harmless things emit radiation — like bananas, Brazil nuts, and granite countertops, according to Cincinnati Children’s Hospital. The type of radiation that comes out of our cellphones isn’t the same radiation that’s released by nuclear fallout or X-rays. Cellphone radiation, also known as radiofrequency radiation, is much weaker — so it can’t cause the same kind of cell damage that can lead to cancer.
Prime free trial and invitee customers: We will automatically apply an Amazon.com Gift Card to your Gift Card Balance in the amount equal to the Prime exclusive discount after you become a paid Prime member. If you cancel your paid Prime membership or return the qualifying smartphone within the first 3 months of your paid Prime membership, we may void your Gift Card or charge you in the amount of the Gift Card. Terms and Conditions apply.

Cables can act as an antenna, especially if they pass close to a strong source of radiofrequency radiation. One study has suggested that if the cable of a hands free mic passes near the phone's antenna, it can pick up some radiation and transmit it to your ear. Our ferrite snap bead is designed to reduce RF radiation in the cable. Made in 2 halves, you simply press it around the hands free wire at any convenient location near the earpiece end. Couldn't be simpler. It is small and lightweight enough to be almost unnoticable, yet powerful enough (50 ohm impedence minimum) to control nasty radiation. These are brand new, top quality and will accommodate wires up to 5 mm (3/16 inch) in diameter. About 1 inch long, grey color. If you are concerned about radiation from your hands free ear mic, this is the answer. Useful from 200-1000 MHz.
George Carlo, PhD, JD, is an epidemiologist and medical scientist who, from 1993 to 1999, headed the first telecommunications industry-backed studies into the dangers of cell phone use. That program remains the largest in the history of the issue. But he ran afoul of the very industry that hired him when his work revealed preventable health hazards associated with cell phone use.
Specifically, we looked for studies that measured rates of acoustic neuromas, gliomas, meningiomas, and thyroid cancers. We also narrowed our search to studies that looked at the effect of radio-frequency radiation originating from an actual cellphone, rather than experimental equipment. We did this because we wanted evidence that could apply to real life, not specific laboratory settings or hypothetical outcomes.

It might be invisible to the naked eye, but electric and magnetic fields (EMFs), including electromagnetic radiation, are everywhere these days, and chances are it’s taking a major toll on your health. High-tech devices including your mobile phone, laptop, tablet, and wearable tech like the Apple Watch® all generate a near-continuous source of unseen pollution that can be stressful and toxic to your cells. If your goal is to be as healthy as possible, it’s important to address the issues that cell phone radiation and other technology create.

Since 2001, the FCC has allowed manufacturers to test phones at a distance of up to one inch from the body to account for the use of a holster. In a 2012 report, however, the Government Accountability Office, the Congressional watchdog agency, noted that many cell phone owners actually keep and use their phones right next to the body, so these outdated testing policies could result in radiofrequency (RF) radiation exposure greater than the FCC’s legal limit (GAO 2012). The GAO report concluded:
Designed to be “leaky”, it permits only a fraction of the RF radiation to penetrate. Exposure to people is reduced (typically 90-99% reduction), and the device usually still works, but with a more limited range. Great for when you permanently or temporarily want to quiet microwave levels without fully turning off the source. Place it over cellphones, cordless phones, two-way radios, smart devices, even wifi routers. Sturdy metal. The two larger units have convenient handle and access holes for wire and cable pass through. Pick the sizes which meet your needs.

Bonus application! In addition to shielding magnetic fields, PaperSHIELD is also quite good at shielding radiowaves (cellphone, wifi, etc). And because of the adhesive backing, it can be adhered to almost any surface you need such as the inside or back of your cellphone case. (Use a near field meter to test RF shielding performance.) Note that it is not transparent, so it can't be used on the touch screen side. Cover the cut edges with sturdy tape as they can be sharp. 36 inches wide. Made in USA.
Universal Cell Phone EMF Radiation Shield – Wallet Case (Small: 3.3"x5.6" Cell Phones, Universal Cell Phone EMF Radiation Shield – Wallet Case (Large: Up to 3.2"x6.2" Cell Phones, iPhone X EMF Radiation Shield & RFID Blocker- Wallet Case, iPhone 8 / 7 EMF Radiation Shield – Wallet Case, iPhone 8 / 7+ (Plus) EMF Radiation Shield – Wallet Case, iPhone 8 / 7 EMF Radiation Shield – SlimFlip Case, iPhone 8 / 7+ (Plus) EMF Radiation Shield – SlimFlip Case, iPhone 6/6S EMF Radiation Shield – Wallet Case, iPhone 6 / 6S+ (Plus) EMF Radiation Shield – Wallet Case, iPhone 6/6S EMF Radiation Shield – SlimFlip Case, iPhone 6 / 6S+ (Plus) EMF Radiation Shield – SlimFlip Case, iPhone 5/5s/SE EMF Radiation Shield – SlimFlip Case, Galaxy S7 EMF Radiation Shield – Wallet Case, Galaxy S7 EMF Radiation Shield – SlimFlip Case, Galaxy S6/S6 Edge EMF Radiation Shield – SlimFlip Case, iPhone 5/5S/SE Case -Wallet
More often power off your phone or set it to airplane mode with Wi-Fi OFF and Bluetooth OFF. Even in standby mode, your phone emits RF energy because it is constantly searching for service or new messages. If you do not need your cell phone, simply power it off. This also applies to all other wireless devices whereby the Wi-Fi antennas can be powered off. Wi-Fi enabled laptops, tablets and other wireless devices (such as gaming devices) are always transmitting even if you are not using them, so remember to power them off.
Forced to take action, the cell phone industry set up a non-profit organization, Wireless Technology Research (WTR), to perform the study. Dr. Carlo developed the program outline and was asked to head the research. Oversight of the issue was charged to the FDA, though it could have and probably should have gone to the Environmental Protection Agency (EPA), which fought hard for jurisdiction. But the industry had enough influence in Washington to get whatever overseer it wanted. It simply didn’t want to tangle with EPA because, says Dr. Carlo, “… the EPA is tough.”
Changing technology and methods of use. Older studies evaluated radiofrequency radiation exposure from analog cell phones. Today, cell phones use digital technology, which operates at a different frequency and a lower power level than analog phones. Digital cell phones have been in use for more than two decades in the United States, and cellular technology continues to change (3). Texting and other applications, for example, are common uses of cell phones that do not require bringing the phone close to the head. Furthermore, the use of hands-free technology, such as wired and wireless headsets, is increasing and may reduce exposure by distancing the phone from the body (36, 37).
to find the minimum distance the federal government recommends that your cell phone must be away from your body. Keeping it closer than the designated distance can result in a violation of the FCC Exposure Limit. Exceeding FCC levels is proven to result in burns, sterility and brain damage. Learn more about fine print instructions and see all the FCC warnings here.

INTEGRITY: Many manufactures claim near 100% EMF protection, referring to the radiation blocking material, NOT the protection you receive on a call. If you covered your whole phone with EMF blocking material, then you'd have no signal. Our EMF blocking material is used on the front cover only, providing you real EMF protection with no sacrifice in reception.


Disclaimer: The content of this website is based on research conducted by TTAC Publishing, LLC, unless otherwise noted. The information is presented for educational purposes only and is not intended to diagnose or prescribe for any medical or psychological condition, nor to prevent, treat, mitigate or cure such conditions. The information contained herein is not intended to replace a one-on-one relationship with a doctor or qualified healthcare professional. Therefore, this information is not intended as medical advice, but rather a sharing of knowledge and information based on research and experience. TTAC Publishing encourages you to make your own health care decisions based on your judgment and research in partnership with a qualified healthcare professional.
Four years ago -- before I bought my first iPhone -- I wouldn’t buy certain model cell phones because their radiation emission levels were too high. I became obsessed with researching this in the buying process, especially after finding out that a man I knew died of brain cancer and was an early mobile phone user. Suspicion was that the phone caused the cancer.
As Jonathan Samet — the dean of the Colorado School of Public Health, who advised the World Health Organization on cellphone radiation and cancer — told me, you can argue anything based on the science we currently have “because there’s not enough evidence to start with.” Actually, there’s not enough high-quality evidence. Before we get into why, and what we know, we need a quick primer on cellphone radiation.
I can’t count how many times I’ve heard people speculate, joke, or jokingly speculate that their cellphone might be giving them cancer. It comes from a very reasonable place of discomfort — few people understand how radiation works, we put our phones right beside our brains all the time, and technology in general often feels like it ought to be causing some sort of societal ill.

5. Use an EMF shielding device. A variety of holsters and other cell phone holders and shields are available that claim to block radiation. If you buy such a product, look to see if it has an SAR (specific absorption rate) value. You want a shielding device that blocks the majority of EMFs. (SAR is a measure of the rate at which energy is absorbed by a body exposed to EMFs.) 
Experts suggest that mobile phone users can take a number of precautions to reduce any possible health risks. Almost all agree that the best step is to keep mobile phone conversations short and to a minimum. Many believe that so-called hands free kits reduce the risks by cutting the amount of electromagnetic radiation entering the brain. They also recommend that users buy phones with external aerials so that it is as far away from the head as possible when in use. Similarly, it is believed that phones with a long talk time are more efficient and produce less powerful emissions. Users are also advised against buying handsets with a high “SAR” value, which means it emits more radiation.
The energy of electromagnetic radiation is determined by its frequency; ionizing radiation is high frequency, and therefore high energy, whereas non-ionizing radiation is low frequency, and therefore low energy. The NCI fact sheet Electromagnetic Fields and Cancer lists sources of radiofrequency radiation. More information about ionizing radiation can be found on the Radiation page.
×