Leibovich was very careful to point out in our interview that Cellsafe is not claiming that the radiation absorbed by the body during phone use leads to health issues like brain tumours, male infertility or damage to unborn babies. But the Cellsafe website strongly suggests these links. Its homepage (image below) leads with the phrase "You should be concerned!" in an eye-catching red, and there is as much screen real estate on the site dedicated to information about the dangers of radiation, as there is for descriptions of the Cellsafe products. This information refers to "high levels of RF radiation" in several places, but it doesn't say whether this describes radiation from phone use.
The cell phone industry is fully aware of the dangers. In fact, enough scientific evidence exists that some companies’ service contracts prohibit suing the cell phone manufacturer or service provider, or joining a class action lawsuit. Still, the public is largely ignorant of the dangers, while the media regularly trumpets new studies showing cell phones are completely safe to use. Yet, Dr. Carlo points out, “None of those studies can prove safety, no matter how well they’re conducted or who’s conducting them.” What’s going on here? While the answer in itself is simplistic, how we got to this point is complex.
We used a few measuring devices to test and see if this product actually blocks radiation and RFID, including a very sophisticated EMF reader. I am glad to say that this is actually a very effective way to reduce radiation. It is most effective on the front side, and when you have it closed and latched, there is very little exposure - only along the top, side and bottom opening.
Parents and consumer advocacy groups occasionally capture attention for voicing concerns about cellphones and other types of non-ionizing radio-frequency radiation exposure, such as the energy emitted from wifi routers in schools. In some cases, they have exaggerated what we know about the risks to kids, and rarely note that cellphones are also just one of many radiation sources we all live with. (Even the Earth itself, the air we breathe, and the sun and stars in our galaxy constantly give off radiation.)
Great article. I learned several things that I will put into use with my electronic technology. Thank you. There are numerous EMF/EMR blockers that you can stick on your cell phones, computers, (even microwave ovens for people who still use these). Each brand I’ve researched has the same goal but they’re all different. Are some brands more effective than others? If you can recommend some good brands, I would appreciate your advice. What are good features to look for when selecting the EMF blockers?
The amount of RF energy absorbed from the phone into the user’s body is known as the specific absorption rate (SAR). Different cell phones have different SAR levels. Cell phone makers are required to report the maximum SAR level of their product to the US Federal Communications Commission (FCC). This information can often be found on the manufacturer’s website or in the user manual for the phone. The upper limit of SAR allowed in the United States is 1.6 watts per kilogram (W/kg) of body weight.
When you make a phone call, just flip the shielded front cover down when you put the phone against your head. It’s that simple. By keeping the shielded front cover closed while against any part of your body, a barrier is created to protect from a broad spectrum of potentially harmful cell phone radiation emissions, yet won’t affect signal quality. You can use your cell phone with a higher sense of safety by simply keeping the shielded flip cover between your body and radiation-emitting source.
EWG also reviewed data in the FCC filings on tests of battery life during a continuous call, measured on an iPhone 4 without a case and on the same phone with an Incipio Le Deux case. This case was chosen because it contains metallic parts (a stainless steel back plate). The presence of metallic components influences the phone’s radiation properties, as the FCC acknowledges (FCC 2001; FCC 2014). Under the test conditions with constant signal strength, an iPhone 4 without a case had 85 percent of battery capacity after a one-hour call and 70 percent after two hours. When the test was repeated with the Incipio Le Deux case, the phone had only 65 percent of battery capacity after a one-hour call and only 10 percent after two hours (Pong 2012).
Asked about his own cellphone use, Dr. Bucher said he had never been a heavy user but, in light of the study, was now “a little more aware” of his usage. On long calls, he said, he tried to use earbuds or find other ways “of increasing the distance” between the cellphone and his body, in keeping with advice issued to consumers about how to lower their exposure.
Today’s report, the final one, was about a decade in the making and is the last of several versions that have been released since preliminary results were presented in May 2016. It represents the consensus of NTP scientists and a group of external reviewers, according to the release. In the future, the NTP plans to conduct studies in smaller exposure chambers and to use biomarkers such as DNA damage to gauge cancer risk. These changes in the experimental setup should mean that future studies will take less time.
Cell phone radiation refers to radiation in the form of electromagnetic waves that is emitted from mobile phones. This type of radiation takes the form of radio waves that are near the microwave range. The amount of radiation that a given cell phone will emit depends on the exact frequency of the radiation, as well as whether the device is using an analog signal or a digital one. There has been speculation that large amounts of cell phone radiation could be hazardous to the user's health, but there are no conclusive scientific findings on the subject.
Can cellphone radiation cause cancer in humans? There’s no scientific consensus on this issue, but there is “some evidence” that exposure to radiation equivalent to that emanating from 1990s-era cellphones is associated with brain tumors in male rats, according to results of a US National Toxicology Program (NTP) study released last week (November 1).
The average radiation level of a Bluetooth earpiece is 0.23 watts per kilogram (W/Kg) according to RF Safe. This is 10 to 100 times higher than the amount of radio frequency (RF) exposure needed to create “leaks” in the blood-brain barrier, allowing for toxins (not to mention the radiation itself!) to pass through into the brain. It’s best to just say NO to Bluetooth!
Who wants to make his own shielded passport or credit card sleeve? Or line a purse, wallet, cellphone case or backpack? Add a shielding liner to a pocket? Wrap a wifi node to block radiation output? Repair a fencing lame? Shield a part of a circuit board? Make an RF gasket? Shield your homeopathy bottles? Attach a ground cord to a fabric? There are hundreds of uses for this versatile shielding patch. A peel-off paper backing reveals a super strong conductive adhesive that keeps the patch where you put it. Easily cut to any shape with ordinary scissors, this metalized fabric is conductive on both sides, completely flexible with no stretch, and solid black in color. 40-50 dB from 10 MHz to 10 GHz. You get two pieces, each 5.5x8 inches. Not intended to adhere directly to skin. Do not machine wash.
Radiation is all around us. Power lines, appliances, and electronic devices all emit electromagnetic frequencies. One source that many of us keep close, perhaps too close, are cell phones, tablets, and other mobile devices. They all use radio frequency (RF) electromagnetic energy, a form of non-ionizing radiation, to communicate. Research has shown that this type of radiation is not benign or harmless to the human body, especially children. Exposure to cell phone and Wifi radiation has been linked to fatigue, dizziness, mental fog, and even worse. As a result, the demand for products that reduce exposure to device radiation is on the rise. In fact, "How can I protect myself from cell phone radiation? What do you recommend?" is a question we get all the time. So, to help, I wanted to offer my thoughts on five products I've found that I believe are worth a look if you're interested in reducing your exposure to cell phone and mobile device radiation.
So what do you do when you need a wireless radiation emitting device but you want to limit the exposure to the people? Perhaps you use a wireless baby monitor, have a cordless phone base station, or you sleep with your cell phone on your nightstand. Maybe there is a wifi router right next to you at work or school. RadiaFence is the answer. It’s a free-standing, semi-transparent microwave barrier that you can put almost anywhere you need. It blocks most of the radiation emitted in one direction by “casting a shadow” (typically 70-90% reduction), while still allowing the wireless device to work. Like sitting in the shade on a sunny day. Portable, inexpensive, attractive. And it couldn’t be easier to use. If you like, you can add a decorative photo or warning sign to change the appearance. Available in 5 styles. Pick the sizes which meet your needs. Style may differ from images.
Exposure to ionizing radiation, such as from x-rays, is known to increase the risk of cancer. However, although many studies have examined the potential health effects of non-ionizing radiation from radar, microwave ovens, cell phones, and other sources, there is currently no consistent evidence that non-ionizing radiation increases cancer risk in humans (2).