It’s true that cellphones do emit radiation. And radiation is a scary word for a lot of people, thanks in part to the horrific aftermath of nuclear accidents and photographs of victims of the nuclear bombs the US dropped on Japan in World War II. People hear radiation and they associate it with nuclear radiation and the bomb, says Geoffrey Kabat, a cancer epidemiologist at the Albert Einstein College of Medicine and author of the book Getting Risk Right. “There are all these associations and those are deeply ingrained in people. But it doesn’t apply here.”
We began by getting a baseline of ambient RF in the room at the location of our testing. We then recorded a baseline of the cellphone RF while on an active call with no case. And finally, we measured the reduction in that baseline (still on the active call) using a variety of different cases and RF reducing products – all at the same set distance from the phone.
Let’s be honest, we’re addicted to our smartphones. According to an ABC news report, the average person checks their phone 150 times per day, not to mention the other 15 hours per day it sits in your pocket. It’s also nothing new that cell phones emit Electromagnetic Fields/Radiation (EMF/EMR) when it’s glued to the side of our head more than 22 times per day. 
In 2011, researchers at the National Institutes of Health showed that low-level radiation from an activated cell phone held close to a human head could change the way certain brain cells functioned, even without raising body temperature. The study did not prove that the effect on brain cells was dangerous, only that radiation from cell phones could have a direct effect on human tissue.
Most cellphone shielding products are designed to reduce radiation to the user while still allowing the phone to function. This means that some radiation can still get to the phone… and some radiation can still get out of the phone! But sometimes you need to completely kill the signal. The RF Kill Box is a full-metal shielding jacket with very high shielding performance.
1. Keep your distance. Do not keep your cell phone next to your body or in your bra. Some athletic wear companies are now making bras with cell phone pockets, as seen in the picture above. PLEASE do not put your phone in the pocket unless your phone is on airplane mode. There is evidence offered by the Environmental Health Trust to suggest that women who keep a cellular phone in their bra may develop breast cancer. Research also indicates that men who keep their cell phones on their belt or near their reproductive organs may have lower sperm counts and less sperm motility.
But according to the FCC, comparing SAR values between phones can be misleading. The listed SAR value is based only on the phone operating at its highest power, not on what users would typically be exposed to with normal phone use. The actual SAR value during use varies based on a number of factors, so it’s possible that a phone with a lower listed SAR value might actually expose a person to more RF energy than one with a higher listed SAR value in some cases.
2. Our products are designed to provide an anti-radiation barrier between the device and the body. This way, the devices are still usable and able to send and receive signal out of the non-shielded side while shielding the EMF away from the body. Because of this, you will only see a reduction in EMF levels on the shielded side of the device. The test you have conducted shows the highest levels from anywhere around the device.
Moving the meter around the case, we detect readings on the side, back and front of the case. We use the multi-directional TES 593 meter which measures 10 MHz to 8GHz. We use the unit of micro-watts per square centimeter, which looks like this little symbol: μW/cm² and we use it on the max setting which shows the maximum measured value. In non-science speak: the highest level of RF we see, which could be from the back the side or the front. 

One of the many advantages of TI22 is that after applying TI22 to your device it will have an invisible layer that will protect your device from harmful EMF radiation scratches and scuffs for up to one year. This layer reaches the full hardness of 9H on the Mohs scale of mineral hardness, which is a scale that characterizes scratch resistance, and is similar to Sapphire, Ruby or Corundum. Its almost as hard as a Diamond.
The World Health Organization (WHO) says the intensity of radio frequency (RF) radiation from cell phones decreases exponentially the further the device is held away from the body. Therefore your safest bet it keep your cell phone as far away from your ear and body as possible at all times. Don’t carry it in your pocket, tucked into a bra strap, and definitely don’t sleep with it next to your head.
As in the NTP study, Ramazzini investigators detected statistically elevated rates of heart schwannomas in male rats at the highest dose. They also had weaker findings linking RF exposure to cancer of glial cells in the brain, which were limited to females. Ronald Melnick, a retired NTP toxicologist who designed the NTP study, says a measure of consistency between the two studies is important, because “reproducibility in science increases our confidence in the observed results.”
That’s why the International EMF Scientist Appeal and a number of health and safety organizations, including the American Academy of Pediatrics and the Environmental Health Trust, have called on the government to reassess the safe levels of exposure to cellphones and other wireless technology and then develop new consumer safety guidelines based on those assessments, Moskowitz said.

Although recall bias is minimized in studies such as COSMOS that link participants to their cell phone records, such studies face other problems. For example, it is impossible to know who is using the listed cell phone or whether that individual also places calls using other cell phones. To a lesser extent, it is not clear whether multiple users of a single phone, for example family members who may share a device, will be represented on a single phone company account. Additionally, for many long-term cohort studies, participation tends to decline over time.
In addition, cellphones potentially harm our health in ways that have nothing to do with cancer. The effect on sperm is concerning to Moskowitz, the director of the Center for Family and Community Health at the Berkeley School of Public Health, and he noted that our current cellphone regulations also don’t account for these potential effects. Plus, we still don’t know what steady exposure to this kind of radiation from devices means for kids.

3. A lab setting is the only legitimate way to show the effectiveness of our technology for a few main reasons: one, a controlled source is the only way to conduct a scientific study. Note that the controlled source that we used was specifically designed to simulate emissions from wireless electronics (RF and ELF emissions of various frequencies). Two, ambient levels in a non-controlled environment will affect readings, rendering the results inaccurate. Three, at-home equipment such as the meter used in the video is not suitable for the types of emissions by a wireless device, nor are they reliable.
A cellular phone is basically a radio that sends signals on waves to a base station. The carrier signal generates two types of radiation fields: a near-field plume and a far-field plume. Living organisms, too, generate electromagnetic fields at the cellular, tissue, organ, and organism level; this is called the biofield. Both the near-field and far-field plumes from cell phones and in the environment can wreak havoc with the human biofield, and when the biofield is compromised in any way, says Dr. Carlo, so is metabolism and physiology.
“If you’re looking for ways to limit your exposure to the electromagnetic emissions from your cell phone, know that, according to the FTC, there is no scientific proof that so-called shields significantly reduce exposure from these electromagnetic emissions. In fact, products that block only the earpiece – or another small portion of the phone – are totally ineffective because the entire phone emits electromagnetic waves. What’s more, these shields may interfere with the phone’s signal, cause it to draw even more power to communicate with the base station, and possibly emit more radiation.”
I debated whether to give it 3 or 4 stars: on features, speed of delivery, and quality of construction, it definitely deserves 4 stars. If I can measure and verify the emf reduction, then I will change the rating to 5 stars. Since the whole point of using it is to block excess em radiation, I can't really give it 5 stars without more proof that it really does so.

The cellular phone industry was born in the early 1980s, when communications technology that had been developed for the Department of Defense was put into commerce by companies focusing on profits. This group, with big ideas but limited resources, pressured government regulatory agencies—particularly the Food and Drug Administration (FDA)—to allow cell phones to be sold without pre-market testing. The rationale, known as the “low power exclusion,” distinguished cell phones from dangerous microwave ovens based on the amount of power used to push the microwaves. At that time, the only health effect seen from microwaves involved high power strong enough to heat human tissue. The pressure worked, and cell phones were exempted from any type of regulatory oversight, an exemption that continues today. An eager public grabbed up the cell phones, but according to Dr. George Carlo, “Those phones were slowly prompting a host of health problems.”
Compatible Phone Models iPhone, Samsung, Motorola and more, This device is designed to work with all cell phones, All dodels, Smart Phones, Flip Phones Apple iPhone 8, Apple iPhone 7, Apple iPhone 6, Apple iPhone 8, 7, 6, Apple iPhone 8, iPhone 7, iPhone 6 iPhone 6 Plus, iPhone 6S Plus, iPhone 7 Plus, iPhone 8 Plus iPhone 6, iPhone 6S, iPhone 7, iPhone 8
5. Use an EMF shielding device. A variety of holsters and other cell phone holders and shields are available that claim to block radiation. If you buy such a product, look to see if it has an SAR (specific absorption rate) value. You want a shielding device that blocks the majority of EMFs. (SAR is a measure of the rate at which energy is absorbed by a body exposed to EMFs.) 
A phone's specific absorption rate (SAR) reveals the maximum amount of radiation the human body absorbs from the phone while it's transmitting. SAR testing ensures that the devices sold in the U.S. comply with the Federal Communications Commission (FCC) SAR exposure limit, but the single, worst-case value obtained from this SAR testing is not necessarily representative of the absorption during actual use, and therefore it is not recommended for comparisons among phones. In short, selecting a lower SAR phone will not reliably ensure lower radiation absorption during use. The FCC has more information at Specific Absorption Rate (SAR) For Cell Phones: What It Means For You.
That’s why randomized controlled trials (RCTs) often yield fairly clear answers about the effectiveness of treatments compared to other study designs. (Fun fact: Scottish doctor James Lind, a clinical trial pioneer, figured out that citrus fruits seemed to have an effect on scurvy using one of the earliest RCTs.) RCTs can also be used to study whether something, like cellphone radiation, can cause disease.
Over time, the number of cell phone calls per day, the length of each call, and the amount of time people use cell phones have increased. Because of changes in cell phone technology and increases in the number of base stations for transmitting wireless signals, the exposure from cell phone use—power output—has changed, mostly lowered, in many regions of the United States (1).
×