Today there are more than two billion cell phone users being exposed every day to the dangers of electromagnetic radiation (EMR)—dangers government regulators and the cell phone industry refuse to admit exist. Included are: genetic damage, brain dysfunction, brain tumors, and other conditions such as sleep disorders and headaches.1-9 The amount of time spent on the phone is irrelevant, according to Dr. Carlo, as the danger mechanism is triggered within seconds. Researchers say if there is a safe level of exposure to EMR, it’s so low that we can’t detect it.


Wi-Fi radiation, which falls into the RF category, is similarly damaging – particularly for men who stand to suffer reproductive damage when RF-emitting devices such as laptops are positioned too closely to the groin area. Like with the issues caused by cell phone radiation, it’s best to keep laptop computers off your lap and away from your body as much as possible.
According to Dr. Devra Davis, who wrote Disconnect: The Truth About Cell Phone Radiation, cell phones are dangerous because they emit erratic signals capable of disrupting resonance and DNA repair. As long as your cellular phone is on, it sends out radiation intermittently. Even if you don’t take your phone out of your pocket all day, it continues to expose you to radiation. Dr. Joseph Mercola, founder of Mercola.com recently wrote an excellent article on the dangers of cell phones and provided common sense ways we can protect ourselves and our family from the electromagnetic radiation it emits.

A cellular phone is basically a radio that sends signals on waves to a base station. The carrier signal generates two types of radiation fields: a near-field plume and a far-field plume. Living organisms, too, generate electromagnetic fields at the cellular, tissue, organ, and organism level; this is called the biofield. Both the near-field and far-field plumes from cell phones and in the environment can wreak havoc with the human biofield, and when the biofield is compromised in any way, says Dr. Carlo, so is metabolism and physiology.
5. Use an EMF shielding device. A variety of holsters and other cell phone holders and shields are available that claim to block radiation. If you buy such a product, look to see if it has an SAR (specific absorption rate) value. You want a shielding device that blocks the majority of EMFs. (SAR is a measure of the rate at which energy is absorbed by a body exposed to EMFs.) 
So, you've read the numerous studies about the potentially harmful health effects of cell phone radiation and you are ready to something about it. Of course, you can use your phone sparingly and put it in airplane mode when possible, use a wired headset or speakerphone when on calls, and never store it in your pocket. However, is that realistic? How about for your kids? In today's world, with our increasing dependence on our cell phones, probably not!
Users were defined as anyone who made at least one phone call per week for six months between 1982 and 1995. So any person who made 26 calls was a cell phone user and therefore considered exposed to radiation. Those with less than 26 calls were non-users. In reality, the radiation exposure between users and non-users defined in this manner is not discernable.
There are theoretical considerations as to why the possible risk should be investigated separately in children. Their nervous systems are still developing and, therefore, more vulnerable to factors that may cause cancer. Their heads are smaller than those of adults and consequently have a greater proportional exposure to the field of radiofrequency radiation that is emitted by cell phones. And, children have the potential of accumulating more years of cell phone exposure than adults do.

But according to the FCC, comparing SAR values between phones can be misleading. The listed SAR value is based only on the phone operating at its highest power, not on what users would typically be exposed to with normal phone use. The actual SAR value during use varies based on a number of factors, so it’s possible that a phone with a lower listed SAR value might actually expose a person to more RF energy than one with a higher listed SAR value in some cases.


People can also reduce their exposure by limiting cell-phone use when the cellular signal is weak; when traveling in a high-speed car, bus or train; to stream audio or video; or to download or upload large files. All of these circumstances cause phones to put out higher-than-normal levels of RF energy. Phones also emit RF energy when connected to WiFi or Bluetooth devices, but at lower levels.

“This means we’re on the beginning curve of an epidemic, with epidemic defined as a change in the occurrence of a disease that is so dramatic in its increase that it portends serious public health consequences,” says Dr. Carlo. “This is what’s not being told to the public. One of the things that I suggest to people who use a cell phone is to use an air tube headset. If you use a wired headset, the current moving through the wire of the headset attracts ambient informational carrying radio waves and thereby increases your exposure.”
It’s easy to call any case a product designed to block smartphone radiation.  What you need to look for is credible, quantifiable claims that highlight a case’s ability to reduce your exposure to the harmful radiation. Look for relevant  certifications from credible organizations (such as FCC accredited laboratories) that will vouch for product claims, and read product reviews online.
The World Health Organization states that "A large number of studies have been performed over the last two decades to assess whether mobile phones pose a potential health risk. To date, no adverse health effects have been established as being caused by mobile phone use."[2] In a 2018 statement, the FDA said that "the current safety limits are set to include a 50-fold safety margin from observed effects of radiofrequency energy exposure".[3]
Disclaimer: The content of this website is based on research conducted by TTAC Publishing, LLC, unless otherwise noted. The information is presented for educational purposes only and is not intended to diagnose or prescribe for any medical or psychological condition, nor to prevent, treat, mitigate or cure such conditions. The information contained herein is not intended to replace a one-on-one relationship with a doctor or qualified healthcare professional. Therefore, this information is not intended as medical advice, but rather a sharing of knowledge and information based on research and experience. TTAC Publishing encourages you to make your own health care decisions based on your judgment and research in partnership with a qualified healthcare professional.
To check for radiowave emissions, use an RF meter with Near Field antenna. Again, position the antenna loop on the phone (because the entire antenna stem has some sensitivity, it is best to position the entire antenna over the area that will be shielded). Note carefully where the loop is positioned. Make a call and watch the readings. Notice the highest and lowest readings, and make a mental note of the "average" reading. Now, insert the shield, and repeat.
For those of you who experience (or want to prevent) ES symptoms in your hands when using a computer keyboard, laptop, cell phone or other electronic devices, these gloves form a conductive enclosure and effectively shield radiowaves and electric fields. Soft, light weight, with ribbed cuff, and offering good tactile sensitivity. Polyester fiber is twisted with pure Silver fibers, then knit into a stretchy glove shape in basic gray color. Each glove has a 1.7 mm snap for a ground cord. Fully hand washable and tested for 50 cycles with no appreciable loss of conductivity. All fibers are conductive, achieving resistivity of less than 10 Ohm/sq. These gloves are also used in industry for static control when working with delicate static sensitive components and can even be used for TENS applications. Grounding is not necessary for Faraday Cage shielding effect, but is necessary for static control. Also useful on touch screens like an iGlove. We do not have the ground cord which fits this snap on these gloves. Shielded Gloves:
If you paid an electrical engineer to shield something for you, depending on the application, they would either use MuMetal or this type of mesh shielding. It’s not some new technology, so there’s no question of whether it works, because it does. Regardless, it would still be nice for them to publish third-party independent testing to reassure people of this.
The government’s policies must change. Cell phone users should make their voices heard to prompt the FCC and manufacturers of cell phones and cases to ensure that these accessories never increase and, to the extent possible, decrease, users’ radiation exposure. At minimum, the FCC must take cell phone cases into consideration when it updates its standards to ensure that the use of a case will not expose people to more radiation than its legal SAR limit.  
In subsequent analyses of Interphone data, investigators addressed issues of risk according to specific location of the tumor and estimated exposures. One analysis of data from seven of the countries in the Interphone study found no relationship between brain tumor location and regions of the brain that were exposed to the highest level of radiofrequency radiation from cell phones (9). However, another study, using data from five of the countries, reported suggestions of an increased risk of glioma and, to a lesser extent, of meningioma developing in areas of the brain experiencing the highest exposure (10).
×