To check for radiowave emissions, use an RF meter with Near Field antenna. Again, position the antenna loop on the phone (because the entire antenna stem has some sensitivity, it is best to position the entire antenna over the area that will be shielded). Note carefully where the loop is positioned. Make a call and watch the readings. Notice the highest and lowest readings, and make a mental note of the "average" reading. Now, insert the shield, and repeat.
A cellular phone is basically a radio that sends signals on waves to a base station. The carrier signal generates two types of radiation fields: a near-field plume and a far-field plume. Living organisms, too, generate electromagnetic fields at the cellular, tissue, organ, and organism level; this is called the biofield. Both the near-field and far-field plumes from cell phones and in the environment can wreak havoc with the human biofield, and when the biofield is compromised in any way, says Dr. Carlo, so is metabolism and physiology.
Toward the end of 1998, Dr. Carlo’s house mysteriously burned down. Public records show that authorities determined the cause of the blaze was arson, but the case was never solved. Dr. Carlo refuses to discuss the incident and will only confirm that it happened. By this time, enough was enough. Dr. Carlo soon went “underground,” shunning the public eye and purposely making himself difficult to find.
EWG is calling on the FCC to update its testing guidelines to take account of the widespread use of smartphone cases. Such action is critical because mounting scientific studies have raised serious questions about the safety of cell phone radiation exposure over the short and long term. In the absence of meaningful action by the Commission, EWG offers consumers tips on how to reduce their exposure to cell phone radiation.
The tricky part about measuring the radiation from a cell phone is that the emission strength varies widely over time. There will be strong bursts of varying intensity, followed by quiet periods. This makes it hard to compare "apples to apples". Also, because you are measuring up close to the source, you must use a near field meter AND you must maintain the position of the meter very precisely.
And don’t get me started on the immersion headgear they are coming out with for gaming. Anyway, I figured I would get a cell phone eventually and use it just as a phone, no bells and whistles. However after this article and a podcast on privacy, where I learned your cell phone is a tracking device, this goes to the towers, I’ve decided on a Definite no.
Safe Cell was successfully tested by an Independent laboratory. The Shielding Effectiveness test as a cell phone radiation protection shield, was conducted by The California Institute of Material Sciences which results proved that "Safe Cell possesses Shielding Effectiveness in the cell phone test frequency range 0.800 GHz to 10.525 GHz". (click here to view the full test report)

The FCC has yet to implement GAO’s recommendations to more closely reflect real-life use. For a narrow subset of smartphones – those sold with lanyards or straps – the FCC advises manufacturers to test phones at a distance of no more than 5 mm from the body (FCC 2014). Yet the FCC has done nothing to ensure more realistic testing of most other smartphones or to account for the widespread use of accessories such as cases, which many different manufacturers produce with both metallic and non-metallic components.


So of course now that we understand that the cases are not tested and just the material--it makes sense! We measured power density levels all around the case-the shielding material most likely isn't used "all over" because then the phone couldn't receive signal and wouldn't be able to engage in a call.  That's why we did not see even close to a 99% reduction when some cases were on the phone.  In fact, watch the video and you'll see some readings are more than 20% higher with a case on vs the naked phone.

Manufacturers conduct government-required certification tests using a bare phone, set to transmit at maximum power, with no accessories. The recorded maximum SAR is reported to the FCC and listed in the phone’s manual. A phone tested with accessories under the same conditions can produce a higher SAR because the materials surrounding the antenna can affect the amount of radiation that reaches and is absorbed by the user’s body. A case can influence both the overall amount of emitted radiation and how it is directed.

Stephen Chanock, who directs the Division of Cancer Epidemiology and Genetics at the National Cancer Institute, remains skeptical, however. Cancer monitoring by the institute and other organizations has yet to show increasing numbers of brain tumors in the general population, he says. Tracking of benign brain tumors, such as acoustic neuromas, was initiated in 2004 by investigators at the institute’s Surveillance, Epidemiology and End Results program, which monitors and publishes statistics on cancer incidence rates. According to Chanock’s spokesperson, the acoustic neuroma data “haven’t accumulated to the point that we can say something meaningful about them.”

SafeSleeve - Unlike the competition, SafeSleeve anti-radiation cases for cell phone integrate FCC accredited lab tested shielding technology that can block over 99% of RF radiation and over 92% of ELF radiation. 360 degree phone protection and built-in RFID blocking wallet comes standard and all products are backed by our 30-day, hassle-free return policy. Free expedited shipping in the US and discounted international rates. Click below to order today!

Jump up ^ "Téléphones mobiles : santé et sécurité" (in French). Le ministère de la santé, de la jeunesse et des sports. 2 January 2008. Retrieved 19 January 2008. Lay article in (in English) making comment at Gitlin, Jonathan M. (3 January 2008). "France: Beware excessive cell phone use?: despite lack of data". Ars Technica. Retrieved 19 January 2008.


Use the speaker mode on the phone or a hands-free device such as a corded or cordless earpiece. This moves the antenna away from your head, which decreases the amount of RF waves that reach the head. Corded earpieces emit virtually no RF waves (although the phone itself still emits small amounts of RF waves that can reach parts of the body if close enough, such as on the waist or in a pocket). Bluetooth® earpieces have an SAR value of around 0.001 watts/kg (less than one thousandth the SAR limit for cell phones as set by the FDA and FCC).
Phone radiation isn’t like the radiation from, say, a nuclear meltdown. That’s what’s known as “ionizing” radiation — it’s high energy and capable of damaging your DNA, which researchers have determined leads to cancer. Phones emit a much lower energy radiation (lower even than visible light) that’s considered to be “non-ionizing.” We know non-ionizing radiation doesn’t damage DNA the way that ionizing radiation does. But the question remains whether it could still react with the body in some other way that might lead to problems from longterm exposure.
That’s why randomized controlled trials (RCTs) often yield fairly clear answers about the effectiveness of treatments compared to other study designs. (Fun fact: Scottish doctor James Lind, a clinical trial pioneer, figured out that citrus fruits seemed to have an effect on scurvy using one of the earliest RCTs.) RCTs can also be used to study whether something, like cellphone radiation, can cause disease.

I don't know why, but I recently had a concern about the fact I keep my smartphone in my pocket for a good part of the day. Was this a "smart" idea, or was there a potential problem with phone radiation? To address this concern, I searched for answers on the Internet. There were a lot of contraptions, many of which seemed to be too good to be true. The one that looked the most promising was Blocsock, not cheap at $24 for the high-end model with the pouch, but it did say it blocked 96% of the cell phone radiation from your body by having special radiation-blocking material on one side, with the side facing away from your body regular material so the phone could still communicate with the outside world. Cheap eBay knockoffs had material on both sides, meaning when you put your phone in them, your phone could't communicate with the outside world! Others did not have the testing results that assured how well the blocking material worked. There is a very detailed SAR test report validating the Blocsock, which I found at sustainablemobile.com. You can Google it. It is a very exhaustive testing report!
Jump up ^ Gandhi, Om P.; Morgan, L. Lloyd; de Salles, Alvaro Augusto; Han, Yueh-Ying; Herberman, Ronald B.; Davis, Devra Lee (14 October 2011). "Exposure Limits: The underestimation of absorbed cell phone radiation, especially in children". Electromagnetic Biology and Medicine. 31 (1): 34–51. doi:10.3109/15368378.2011.622827. ISSN 1536-8378. Retrieved 2015-04-25.
Stick on anti-radiation protection shields etc are often made of metal which may block signal and prevent reliable mobile phone communications with signal towers. Mobile phones recognise the potential for a dropped signal and actually increase power to compensate. The result is a fast draining battery and an even higher radiation output as a result of using the product (an exception to this are shields that are placed in between the phone and the user as these do not impede signal to cell towers to any significant degree)
Note: Although it is true that cell phones emit low frequency magnetic fields that can be measured in milliGauss, they also emit high frequency microwave radiation which is what all the concern (and publicity) is about, and which the products below are designed to shield. Many clients have contacted us seeking a shield for BOTH magnetic fields and microwaves for their phone. Such a shield does not currently exist. To reduce your exposure to BOTH types of radiation, use an airtube headset and keep the phone itself at a distance.
Asked about his own cellphone use, Dr. Bucher said he had never been a heavy user but, in light of the study, was now “a little more aware” of his usage. On long calls, he said, he tried to use earbuds or find other ways “of increasing the distance” between the cellphone and his body, in keeping with advice issued to consumers about how to lower their exposure.

We did not simply measure energy coming from the front of the case which is the area of the case where the phone would be "shielded" from radiation. If we had taken readings with a directional meter, specifically measuring energy coming from only the front or flap cover where the shielding material is, we assume as the manufacturers claim, that we would have seen a drop in the radiation readings.


There’s no question that portable phones and computers offer many conveniences and have made our lives easier in countless ways. For many people this convenience outweighs the worry of EMFs. My hope is that by becoming aware of the sources and dangers of cell phone radiation and EMFs, you’ll take steps to minimize exposure for both you and your family.
The NTP studied radiofrequency radiation (2G and 3G frequencies) in rats and mice (33, 34). This large project was conducted in highly specialized labs that specified and controlled sources of radiation and measured their effects. The rodents experienced whole-body exposures of 3, 6, or 9 watts per kilogram of body weight for 5 or 7 days per week for 18 hours per day in cycles of 10 minutes on, 10 minutes off. A research overview of the rodent studies, with links to the peer-review summary, is available on NTP website. The primary outcomes observed were a small number of cancers of Schwann cells in the heart and non-cancerous changes (hyperplasia) in the same tissues for male rats, but not female rats, nor in mice overall.
×