There are alternate technologies that can be considered when looking to reduce cell phone radiation exposure which we don’t use. Why don’t we use them? Incorporating technologies such as antennas into a case can greatly reduce outgoing cell phone radiation levels when close to the cell tower, but not totally. If farther away, the cell phone signal levels increase, as does the radiation exposure to the body, possibly to unacceptable output power levels. This design does not reduce radiation exposure from the WiFi and Bluetooth RF because cell phones do not have the capacity to reduce their power levels whether or not an antenna is present. Maybe just as important, this design does not have the shielding capacity for ELF emissions which have the same dangers as the RF emissions. Other device attachments like buttons and stickers are minimally effective to totally ineffective, with no scientific basis. In short, there are no other technologies capable of up to eliminating all of the many potentially harmful cell phone emissions from hitting the body.

The RF waves from cell phones come from the antenna, which is part of the body of a hand-held phone. The waves are strongest at the antenna and lose energy quickly as they travel away from the phone. The phone is typically held against the side of the head when in use. The closer the antenna is to the head, the greater a person’s expected exposure to RF energy. The body tissues closest to the phone absorb more energy than tissues farther away.
Perhaps more importantly, what types of radiation are causing, or likely to cause, or are suspected of causing, harm to humans? Is it the “harmonics” from the transmitter? Is it the RF from the circuitry? Is it the primary frequency on which the cell phone operates? This is important to understand. If the problem is the primary frequency on which the cell phone operates then forget the case and ditch the cell phone.
A cellular phone is basically a radio that sends signals on waves to a base station. The carrier signal generates two types of radiation fields: a near-field plume and a far-field plume. Living organisms, too, generate electromagnetic fields at the cellular, tissue, organ, and organism level; this is called the biofield. Both the near-field and far-field plumes from cell phones and in the environment can wreak havoc with the human biofield, and when the biofield is compromised in any way, says Dr. Carlo, so is metabolism and physiology.
In conclusion: It is still unclear whether use of cellular technology is associated with an increased risk to develop malignant and benign tumors, but taking into account the results of recent studies, the Ministry of Health adopts the precautionary principle and follows the recommendations listed in the “Ministry of Health Recommendations” (below).
SquareTrade Protection Plans are only valid for new or Amazon certified refurbished products purchased at Amazon in the last 30 days. By purchasing this Protection Plan you agree to the Protection Plan Terms & Conditions (http://www.squaretrade.com/terms-standard). Your Protection Plan Terms & Conditions will be delivered via email within 24 hours of purchase
Specific Absorption Rate is an indicator of how much EMF radiation body tissue absorbs when you’re using a cell phone and is one way to measure and compare the harm of different devices. In this article, I wanted to provide a resource to compare and contrast the SAR levels of many popular phones and talk a bit about what Specific Absorption Rate is, and how we can use it.
We used a few measuring devices to test and see if this product actually blocks radiation and RFID, including a very sophisticated EMF reader. I am glad to say that this is actually a very effective way to reduce radiation. It is most effective on the front side, and when you have it closed and latched, there is very little exposure - only along the top, side and bottom opening.
Hi Ty. I’m an EHS sufferer so now I try to live as free from technology as possible. My landline is connected with a cable, my router is linked to my desktop with a cable. My cell phone just does texts and calls and is switched off 99% of the time. My car is an old Skoda with no Sat Nav, no blue tooth technology and I have an earthing strap running off the rear chassis to remove the EMF’s to earth. At night I dump the power upstairs off along with the lighting circuit, I sleep on an organic mattress with no springs – so no aeril effect attracting EMFs whilst I sleep. Even the alarm clock is a wind up and with black out curtains I get the best sleep ever. Living in a mid terrace house can be a problem but Y-Sheilding both walls has blocked the majority of the neighbours harmful radiation. Guess what, no more EHS symptons.
A series of studies testing different scenarios (called simulations by the study authors) were carried out using incidence data from the Nordic countries to determine the likelihood of detecting various levels of risk as reported in studies of cell phone use and brain tumors between 1979 and 2008. The results were compatible with no increased risks from cell phones, as reported by most epidemiologic studies. The findings did suggest that the increase reported among the subset of heaviest regular users in the Interphone study could not be ruled out but was unlikely. The highly increased risks reported in the Swedish pooled analysis were strongly inconsistent with the observed glioma rates in the Nordic countries (24).
These stick on “blockers” don’t work. I am EHS and can tell you with certainty (because I feel the fields) that they are not blocking anything. You must use substantial materials like those used in faraday cages (silver and copper), which are now manufactured in materials and fabrics, or avoid EMF use period. Just look at military use for example. They are not using stick on blockers. Follow Ty’s advice for minimizing and avoiding EMF, and look up EMF blocking fabrics, building materials, etc… for the real blockers.
Forward your cell phone to landlines whenever you are at home, then power off the cell phone without missing a call. Biological effects can be related to both strength of cell phone radiation dose and duration of exposure, so consider whether or not your communication is urgent. Remember: Use a corded home landline (not a home cordless phone, because cordless phones use electromagnetic microwave technology just like cell phones). Most cordless phone base stations constantly emit microwave radiation regardless whether or not any connected handset is in use. The cordless phone handsets also emit microwave radiation. Corded landlines have no radiation emissions and are the best choice.

So of course now that we understand that the cases are not tested and just the material--it makes sense! We measured power density levels all around the case-the shielding material most likely isn't used "all over" because then the phone couldn't receive signal and wouldn't be able to engage in a call.  That's why we did not see even close to a 99% reduction when some cases were on the phone.  In fact, watch the video and you'll see some readings are more than 20% higher with a case on vs the naked phone.


Rats were exposed to radiation with a frequency of 900 megahertz, typical of the cellphones in use when the study was conceived in the 90s, for about nine hours per day for two years, The New York Times reports. The lowest levels of radiation used in the study were equivalent to the maximum exposure a phone can cause and still receive federal regulatory approval; the highest levels to which the animals were exposed were four times that. 
Over time, the number of cell phone calls per day, the length of each call, and the amount of time people use cell phones have increased. Because of changes in cell phone technology and increases in the number of base stations for transmitting wireless signals, the exposure from cell phone use—power output—has changed, mostly lowered, in many regions of the United States (1).
×