Dr. Carlo, wrote a  Medical Alert ten years ago. He cautioned people with EMF sensitivity against relying upon widely-available EMR Protection Products to prevent the effects of EMF exposure. He noted that EMF sensitive individuals were reporting the opposite effect: people found their symptoms and/or sensitivity worsened. Specifically, severe “symptom relapses.” Dr. Carlo noted:
Some people might consider choosing a phone with a low SAR value. Different models of phones can give off different levels of RF waves. But as noted above, according to the FCC the SAR value is not always a good indicator of a person’s exposure to RF waves during normal cell phone use. One way to get information on the SAR level for a specific phone model is to visit the phone maker’s website. The FCC has links to some of these sites here: www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellular-telephones. If you know the FCC identification (ID) number for a phone model (which can often be found somewhere on the phone or in the user manual), you can also go to the following web address: www.fcc.gov/oet/ea/fccid. On this page, you will see instructions for entering the FCC ID number.
The U.S. Food and Drug Administration (FDA) notes that studies reporting biological changes associated with radiofrequency radiation have failed to be replicated and that the majority of human epidemiologic studies have failed to show a relationship between exposure to radiofrequency radiation from cell phones and health problems. The FDA, which originally nominated this exposure for review by the NTP in 1999, issued a statement on the draft NTP reports released in February 2018, saying “based on this current information, we believe the current safety limits for cell phones are acceptable for protecting the public health.” FDA and the Federal Communications Commission share responsibility for regulating cell phone technologies.
4. For the reasons mentioned in #3 above, an at-home meter test is extremely inaccurate and unreliable. That said, a far field RF meter such as the one you are using is highly influenced by ambient RF levels that exist almost everywhere. Again, we do not aim to eliminate the radiation from the device, nor from your surroundings, but our technology does deflect the radiation away from the body.
If you're concerned that talking on your cell phone could cook your brain, you may want to invest in an anti-radiation phone case. The basic idea behind these cases is that they redirect the radiation produced by the phone away from the user, so it isn't constantly bombarding your skull. They can accomplish this in a variety of ways; one involves using antennas to redirect the waves, and another uses silicone or other materials to block the waves.

Only 0.010 inch thick, PaperSHIELD is flexible and can be easily cut with a scissors and shaped by hand into simple or very complex shapes. High saturation and moderate permeability make this ideal for shielding weak magnets, or stronger magnets with many layers of shielding. This material is particularly suited for achieving precise levels of partial shielding as you can add exactly the right number of layers to achieve the desired result. White paper on one side can be imprinted (by you). Peel and stick adhesive on the other side permits easy and semi-permanent mounting almost anywhere. Magnets will stick to it nicely.
Universal Cell Phone EMF Radiation Shield – Wallet Case (Small: 3.3"x5.6" Cell Phones, Universal Cell Phone EMF Radiation Shield – Wallet Case (Large: Up to 3.2"x6.2" Cell Phones, iPhone X EMF Radiation Shield & RFID Blocker- Wallet Case, iPhone 8 / 7 EMF Radiation Shield – Wallet Case, iPhone 8 / 7+ (Plus) EMF Radiation Shield – Wallet Case, iPhone 8 / 7 EMF Radiation Shield – SlimFlip Case, iPhone 8 / 7+ (Plus) EMF Radiation Shield – SlimFlip Case, iPhone 6/6S EMF Radiation Shield – Wallet Case, iPhone 6 / 6S+ (Plus) EMF Radiation Shield – Wallet Case, iPhone 6/6S EMF Radiation Shield – SlimFlip Case, iPhone 6 / 6S+ (Plus) EMF Radiation Shield – SlimFlip Case, iPhone 5/5s/SE EMF Radiation Shield – SlimFlip Case, Galaxy S7 EMF Radiation Shield – Wallet Case, Galaxy S7 EMF Radiation Shield – SlimFlip Case, Galaxy S6/S6 Edge EMF Radiation Shield – SlimFlip Case, iPhone 5/5S/SE Case -Wallet
“One thing all these conditions have in common is a disruption, to varying degrees, of intercellular communication. When we were growing up, TV antennas were on top of our houses and such waves were up in the sky. Cell phones and Wi-Fi have brought those things down to the street, integrated them into the environment, and that’s absolutely new. The recognition mechanism, where protein vibration sensors on the cell membrane pick up a signal and interpret it as an invader, only works because the body recognizes something it’s never seen before.”

Four years ago -- before I bought my first iPhone -- I wouldn’t buy certain model cell phones because their radiation emission levels were too high. I became obsessed with researching this in the buying process, especially after finding out that a man I knew died of brain cancer and was an early mobile phone user. Suspicion was that the phone caused the cancer.


*SAR values are from tests conducted by Pong Research Corp on March 29, 2012 and submitted to the FCC on May 31, 2012. Because the SAR values were submitted to the FCC in graph form, EWG estimated numerical SAR values based on the chart available in WT Docket 11-186 (http://apps.fcc.gov/ecfs/document/view?id=7021921006). Pong’s filing to the FCC did not indicate whether SAR measurements were done at the head or in a body-worn configuration. In a personal communication, Pong informed EWG that the SAR measurements were done in a body-worn configuration, with the same distance from the test mannequin used by the phone manufacturer. Tests in the body-worn configuration were done at a 10 millimeter separation distance.
Our recommendation is to reduce your exposure from wireless sources. We advocate what’s referred to as the Precautionary Principle. Basically, this means that because there’s research, lots of it actually, saying the energy that powers our cellphones (RF radiation) could be causing health concerns like tumors and cancer. We ought to take care when using our cell phones and all devices that emit RF, using them mindfully.
Take a closer look at the product claims. Many refer to their “shielding technology” and not the product itself. In many cases, the “FCC Certified” labs they cite are actually testing how much RF the raw shielding material can block. They’re testing the materials used in the products. They’re not testing how much RF the actual products block while on a real-world phone.
“One thing all these conditions have in common is a disruption, to varying degrees, of intercellular communication. When we were growing up, TV antennas were on top of our houses and such waves were up in the sky. Cell phones and Wi-Fi have brought those things down to the street, integrated them into the environment, and that’s absolutely new. The recognition mechanism, where protein vibration sensors on the cell membrane pick up a signal and interpret it as an invader, only works because the body recognizes something it’s never seen before.”
This substantially changes the debate on whether cell phone use is a cancer risk. Up until this point, the federal government and cell phone manufacturers operated on the assumption that cell phones cannot by their very nature cause cancer, because they emit non-ionizing radiation. Whereas ionizing radiation—the kind associated with x-rays, CT scans, and nuclear power plants, among others—definitely causes cancer at high enough doses, non-ionizing radiation was believed to not emit enough energy to break chemical bonds. That meant it couldn’t damage DNA, and therefore couldn’t lead to mutations that cause cancer.
Whether you call them cell phones, smart phones or mobile devices, it seems like everyone has one. According to the wireless telecommunications industry, the U.S. now has an estimated 300 million mobile subscribers, compared to 110 million subscribers a decade ago. The increase in cell phone use has generated concern about possible health risks related to radiofrequency electromagnetic fields from this technology, and a market for shields as possible protection against the radio waves the phones emit. The Federal Trade Commission (FTC), the nation's consumer protection agency, has some practical tips to help you avoid scams and limit your exposure to electromagnetic emissions from your cell phone.
Use the speaker mode on the phone or a hands-free device such as a corded or cordless earpiece. This moves the antenna away from your head, which decreases the amount of RF waves that reach the head. Corded earpieces emit virtually no RF waves (although the phone itself still emits small amounts of RF waves that can reach parts of the body if close enough, such as on the waist or in a pocket). Bluetooth® earpieces have an SAR value of around 0.001 watts/kg (less than one thousandth the SAR limit for cell phones as set by the FDA and FCC).
Rats were exposed to radiation with a frequency of 900 megahertz, typical of the cellphones in use when the study was conceived in the 90s, for about nine hours per day for two years, The New York Times reports. The lowest levels of radiation used in the study were equivalent to the maximum exposure a phone can cause and still receive federal regulatory approval; the highest levels to which the animals were exposed were four times that. 
Because of inconsistent findings from epidemiologic studies in humans and the lack of clear data from previous experimental studies in animals, in 1999 the Food and Drug Administration nominated radiofrequency radiation exposure associated with cell phone exposures for study in animal models by the U.S. National Toxicology Program (NTP), an interagency program that coordinates toxicology research and testing across the U.S. Department of Health and Human Services and is headquartered at the National Institute of Environmental Health Sciences, part of NIH.
×