“When symptoms are not addressed comprehensively– for example, using symptom amelioration without simultaneous elimination of exposure – cell membrane adverse reaction and damage continue to occur while the patient is assuming the cause of the problem has been eliminated. This lulls patients into a false sense of security, causing them to aggravate their exposures through the increased use of their wireless devices. When the damage reaches a critically harmful level, even the symptom amelioration can no longer be sustained by the damaged cells.”
So, what do these results in rodents mean for people? Not a whole lot, experts say. “Even with frequent daily use by the vast majority of adults, we have not seen an increase in events like brain tumors,” the FDA’s statement says. Otis Brawley, the American Cancer Society’s chief medical officer, agreed in an interview with The Associated Press. “The evidence for an association between cellphones and cancer is weak, and so far, we have not seen a higher cancer risk in people,” Brawley told the AP in a phone interview. “I am actually holding my cellphone up to my ear.”
I have not gotten a cell phone, I was gifted a tablet, but it stays off most of the time, I use a desktop PC and my home phone is still landline but cordless. For me it’s been a bit of mixed bag in that I don’t want to rely so heavily on technology to do and remember things for me. When I hear about the new and latest tech that can now do X,Y, or Z for you, I think of the two little boys in the 80’s Cafe in BTTF.
From the FCC website: "The FCC ID number is usually shown somewhere on the case of the phone or device. In many cases, you will have to remove the battery pack to find the number. Once you have the number proceed as follows. Go to the following Web address: www.fcc.gov/oet/ea/fccid. Once you are there... Enter the FCC ID number (in two parts as indicated: 'Grantee Code' is comprised of the first three characters, the 'Equipment Product Code' is the remainder of the FCC ID). Then click on 'Start Search.' The grant of equipment authorization for this particular ID number should appear. The highest SAR values reported in the equipment certification test data are usually included in the comments section of the grant of equipment certification."
Fears that the low-energy radiation emitted by cellphones could cause cancer seem to have been simmering ever since cellphones went mainstream. The latest flare up is probably thanks to two things: an article in The Nation about “Big Wireless” and a government study that recently reported some male rats exposed to huge doses of full-body cellphone radiation developed a rare type of heart tumor.
Yes, cell phones emit Electromagnetic Fields (EMF) and direct exposure to these emissions can be a health risk. There are two types of EMF radiation emitted from cell phones: Extremely Low Frequency (ELF) radiation and Radio Frequency (RF) radiation (which includes cellular signals, WiFi and Bluetooth). More and more, particularly in recent years, scientific studies have confirmed that these EMF exposure can adversely modify the biological operations of the body. In more serious cases, exposure to EMFs can lead to tumors, reduce sperm count and other serious health concerns.

These cases work by redirecting the electromagnetic radiation (EMR) that is produced by phones, away from the user. All phones produce EMR when connected to the mobile network, and the effect of this energy is measured as a Specific Absorption Rate, or SAR: a measurement describing the radiation absorbed by kilogram of tissue. Government regulations in Australia dictate that all phones in Australia must emit a SAR less than 2 W/kg under the worst case scenario, and while all phones comply, most modern phones emit, at most, only half of this safe level, or approximately 1 W/kg.


A full featured desktop or wall mount corded telephone (no microwaves) combined with a special ultra low EMF headset. You get all the benefits of a normal telephone without putting yourself close to the strong magnetic fields associated with the handset, speakerphone, or phone base. The special headset cord is about 3 feet long and uses a plastic tube to carry the sound to your ear. Absolutely no electronics, wires or magnets are near your ear. Cord provides distance from telephone base and traditional handset, convenient mobility, and can be extended up to 15 feet with option extension cord, sold separately (see below). Tested and approved by Less EMF Inc., dramatic field reduction when the headset is used. Although pictured as white, our current stock is a black phone.
With our Phone Pouch, you can carry your phone at a safer distance. And with our powerful shielding material that lines the back of the Phone Pouch and deflects up to 99% of cell phone radiation (65-80 dB attenuation of frequencies from 30MHz to 1GHz), you’re exposed to even less harmful cell phone radiation. Our Phone Pouch uses well established science– inside each Pouch is a layer of fabric, interwoven with gossamer thin metallic threads that form a shield to deflect EMF radiation, working much like a Faraday cage.

We used a few measuring devices to test and see if this product actually blocks radiation and RFID, including a very sophisticated EMF reader. I am glad to say that this is actually a very effective way to reduce radiation. It is most effective on the front side, and when you have it closed and latched, there is very little exposure - only along the top, side and bottom opening.
The tricky part about measuring the radiation from a cell phone is that the emission strength varies widely over time. There will be strong bursts of varying intensity, followed by quiet periods. This makes it hard to compare "apples to apples". Also, because you are measuring up close to the source, you must use a near field meter AND you must maintain the position of the meter very precisely.

You’ll notice radiation is split into two categories here: ionizing and non-ionizing. The waves emitted from radios, cellphones and cellphone towers, Wi-Fi routers, and microwaves are referred to as “radio-frequency” radiation. That’s a type of “non-ionizing” radiation, since it doesn’t carry enough energy to “ionize” — or strip electrons from atoms and molecules. (Other sources of non-ionizing radiation, as you can see in our chart, include visible and infrared light.)
Use the speaker mode on the phone or a hands-free device such as a corded or cordless earpiece. This moves the antenna away from your head, which decreases the amount of RF waves that reach the head. Corded earpieces emit virtually no RF waves (although the phone itself still emits small amounts of RF waves that can reach parts of the body if close enough, such as on the waist or in a pocket). Bluetooth® earpieces have an SAR value of around 0.001 watts/kg (less than one thousandth the SAR limit for cell phones as set by the FDA and FCC).
Note: Although it is true that cell phones emit low frequency magnetic fields that can be measured in milliGauss, they also emit high frequency microwave radiation which is what all the concern (and publicity) is about, and which the products below are designed to shield. Many clients have contacted us seeking a shield for BOTH magnetic fields and microwaves for their phone. Such a shield does not currently exist. To reduce your exposure to BOTH types of radiation, use an airtube headset and keep the phone itself at a distance.
When you make a phone call, just flip the shielded front cover down when you put the phone against your head. It’s that simple. By keeping the shielded front cover closed while against any part of your body, a barrier is created to protect from a broad spectrum of potentially harmful cell phone radiation emissions, yet won’t affect signal quality. You can use your cell phone with a higher sense of safety by simply keeping the shielded flip cover between your body and radiation-emitting source.
The pacemaker studies were a harbinger of bad things to come. Results showed that cell phones do indeed interfere with pacemakers, but moving the phone away from the pacemaker would correct the problem. Amazingly, the industry was extremely upset with the report, complaining that the researchers went off target. When Dr. Carlo and his colleagues published their findings in the New England Journal of Medicine in 1997,11 the industry promptly cut off funding for the overall program. It took nine months for the FDA and the industry to agree on a scaled-down version of the program to continue going forward. Dr. Carlo had volunteered to step down, since he was clearly not seeing eye-to-eye with the industry, but his contract was extended instead, as no one wanted to look bad from a public relations standpoint.
Our recommendation is to reduce your exposure from wireless sources. We advocate what’s referred to as the Precautionary Principle. Basically, this means that because there’s research, lots of it actually, saying the energy that powers our cellphones (RF radiation) could be causing health concerns like tumors and cancer. We ought to take care when using our cell phones and all devices that emit RF, using them mindfully.
These stick on “blockers” don’t work. I am EHS and can tell you with certainty (because I feel the fields) that they are not blocking anything. You must use substantial materials like those used in faraday cages (silver and copper), which are now manufactured in materials and fabrics, or avoid EMF use period. Just look at military use for example. They are not using stick on blockers. Follow Ty’s advice for minimizing and avoiding EMF, and look up EMF blocking fabrics, building materials, etc… for the real blockers.
The amount of RF energy absorbed from the phone into the user’s body is known as the specific absorption rate (SAR). Different cell phones have different SAR levels. Cell phone makers are required to report the maximum SAR level of their product to the US Federal Communications Commission (FCC). This information can often be found on the manufacturer’s website or in the user manual for the phone. The upper limit of SAR allowed in the United States is 1.6 watts per kilogram (W/kg) of body weight.

The phone is placed in various positions on the head and body, including held to both ears, and all measurements are taken and reported to the FCC when the manufacturer is seeking approval. However, it should be noted that only the very highest SAR values for each type of radiation are included in final consideration for compliance with the FCC’s guidelines.
Hi August and Tech Wellness Team. We at SafeSleeve salute you for your effort to educate and provide solutions for the hidden dangers of EMF radiation exposure from wireless electronics. Like you, we’ve worked extremely hard to provide a practical solution for EMF exposure and, as verified by our independent lab testing, we believe we’ve found an extremely effective and practical solution. While I cannot speak for the other devices you tested here, there are some key points about our SafeSleeve technology that we wanted to make sure you took into consideration:

The energy of electromagnetic radiation is determined by its frequency; ionizing radiation is high frequency, and therefore high energy, whereas non-ionizing radiation is low frequency, and therefore low energy. The NCI fact sheet Electromagnetic Fields and Cancer lists sources of radiofrequency radiation. More information about ionizing radiation can be found on the Radiation page.
×