Want to let people know that cellphones cannot be used in certain areas without an embarrassing confrontation? These decals are suitable for putting up in schools, restaurants, theaters, stores, taxicabs, busses, trains, hospitals, offices, homes or any other place that's appropriate for a cellphone-free zone. High quality decals measure 3½" by 3½". Nice strong adhesive, simply peel and stick.
As a good thing to keep in mind, there are hundreds of thousands of people suffering from EHS in the world. Some of them live in forests, tents, and anywhere they can get away from society and EMFs because their symptoms are so bad when exposed. I have not heard one single EHS person claim that any of these types of devices work. They sure don’t for me. Most EHS sufferers are so desperate that they have researched and tried just about everything. Getting away from EMFs, or blocking them with material that does actually block them, like as a Faraday cage, is what works. And this is clearly what the scientific evidence shows. If these devices worked, that would be fabulous. One could spend $100 and be well, instead of having their life turned upside down, and in the worst cases as with some, committing suicide due to complete hopelessness and helplessness.. However, that is not the case. To further prove whether they work or not, one could wear one, and measure with a meter designed to measure EMF absorption in the body (they exist now). Has the manufacturer had this done, and is their evidence of it? An EHS person can tell without a meter anyway, but to prove to others, this might be a good idea.
These cases work by redirecting the electromagnetic radiation (EMR) that is produced by phones, away from the user. All phones produce EMR when connected to the mobile network, and the effect of this energy is measured as a Specific Absorption Rate, or SAR: a measurement describing the radiation absorbed by kilogram of tissue. Government regulations in Australia dictate that all phones in Australia must emit a SAR less than 2 W/kg under the worst case scenario, and while all phones comply, most modern phones emit, at most, only half of this safe level, or approximately 1 W/kg.
One of the most robust animal studies in the world comes from the US government. In 1999, during the Clinton administration, the Food and Drug Administration asked the National Toxicology Program (NTP) to study the toxicity and cancer-causing capability of cellphone radio-frequency radiation. At the time, health officials felt epidemiological studies in humans wouldn’t answer these questions, so the NTP embarked on studies in rats and mice.
Peer review is a vital part of any scientific study; it brings several more lifetimes of expertise into the room to rigorously check a study for any weak points. Melnick calls the peer reviewers’ choice to change some conclusions an unusual move; “It’s quite uncommon that the peer review panel changes the final determination,” he says, noting if anything, he’s seen peer reviewers downgrade findings, not upgrade them. “Typically when NTP presents their findings, the peer review almost in all cases goes along with that.” In this case, the peer reviewers felt the data—when combined with their knowledge of the cancers and with the study design itself—was significant enough to upgrade several of the findings.
According to this sub-regulation, “a speakerphone is a device that enables use of the phone without holding it, providing that if the device is installed on the phone, the phone will be positioned in the vehicle in a stable manner that prevents it from falling”. For the regular mobile phone instrument in the vehicle, it is advisable to install an antenna outside the vehicle and not inside it, and to prefer wire connections between the phone and the speaker over use of a blue tooth.
Pong Research also makes cases for the iPad and its technology is arguably better suited for that. Why? Because serving as a stand to prop up your iPad or tablet, it means you don’t really need to hold it. That’s an ideal setup because higher amounts of radiation are going out the back, versus the front of the screen which you are touching with your fingers and palms.

Well, Loyd really does seems like a guy with great intentions! However, he has put too much faith in Pong’s SAR testing, and SAR guidelines in general — to the point he no-longer believes his own eye’s when nothing is observed on his trusty RF meter.   Which proves (Using an RF Meter) there is absolutely no real reduction in actual radiation coming from the front of the phone when a pong cell phone case is used.

W. Kim Johnson, a retired physicist and past president of the New Mexico Academy of Science, reviewed the Aires web site for Discovery News and described the material as gibberish, saying that the authors "of the technical description of the ‘Aires' device reads like a random selection of technical terminology. The working description for this device is made up of jargon that, in the end, really says nothing."

Unfortunately, regulatory boards do not require third-party phone accessory manufacturers to consider how their product will work in tandem with the smartphone. Neither do governments require smartphone manufacturers to conduct extensive research on whether their SAR will still meet the FCC’s allowable radiation exposure limits when their devices are using a phone case or other 3rd party accessories.


The studies are notable for their sizes. Researchers at the National Toxicology Program, a federal interagency group under the National Institutes of Health, tested 3,000 rats and mice of both sexes for two years—the largest investigation of RF radiation and cancer in rodents ever undertaken in the U.S. European investigators at the Ramazzini Institute in Italy were similarly ambitious; in their recent study they investigated RF effects in nearly 2,500 rats from the fetal stage until death.
The exact source of radiation in a cell phone is from the transmitter, a device located near the antenna that converts audio data into electromagnetic waves. The amount of radiation a cell phone can emit is limited by legal restrictions in the U.S., Canada and Europe. Additionally, the average radiation levels of most mobile phones are available to the public, courtesy of the Federal Communications Commission in the U.S.
Note: Although it is true that cell phones emit low frequency magnetic fields that can be measured in milliGauss, they also emit high frequency microwave radiation which is what all the concern (and publicity) is about, and which the products below are designed to shield. Many clients have contacted us seeking a shield for BOTH magnetic fields and microwaves for their phone. Such a shield does not currently exist. To reduce your exposure to BOTH types of radiation, use an airtube headset and keep the phone itself at a distance.

Let’s say you are in class, or at the movies, and you don’t want your phone to ring. Slip it into the fully shielded slot. In this position, RF signals in or out will be reduced almost to zero, which is enough to stop the phone from ringing in most circumstances unless you have an especially good connection. You can also store chipped cards (like credit cards) in here to prevent unintentional reading.

Well, either the sleeve blocks 99.9% of all emissions or it doesn’t. The point is, anything less than what the company is advertising constitutes FRAUD. If they had said a 50% reduction would be seen, then the RF meter should have reflected that. Methinks that this company is duping a lot of customers. While the product ‘looks’ good, my experience was that it made NO difference at all. In fact, it was worse having this case and the notion of false security. I ended up getting horrific migraines right after I started using it. I was falsely confident that I was being protected. Perhaps part of the case blocked the signal which forced the phone to work that much harder, therefore nullifying any benefit. Please note, consumers. I would not recommend SafeSleeve based on my experience.
For those of you who experience (or want to prevent) ES symptoms in your hands when using a computer keyboard, laptop, cell phone or other electronic devices, these gloves form a conductive enclosure and effectively shield radiowaves and electric fields. Soft, light weight, with ribbed cuff, and offering good tactile sensitivity. Polyester fiber is twisted with pure Silver fibers, then knit into a stretchy glove shape in basic gray color. Each glove has a 1.7 mm snap for a ground cord. Fully hand washable and tested for 50 cycles with no appreciable loss of conductivity. All fibers are conductive, achieving resistivity of less than 10 Ohm/sq. These gloves are also used in industry for static control when working with delicate static sensitive components and can even be used for TENS applications. Grounding is not necessary for Faraday Cage shielding effect, but is necessary for static control. Also useful on touch screens like an iGlove. We do not have the ground cord which fits this snap on these gloves. Shielded Gloves:
I love this case. However, I don't understand what happens to the radiation that must collect under the case; isn't there a burst of radiation when the case is opened? I posted this question but the answers were from people who hadn't thought of that issue; they didn't have the answer, except for one who theorized that the radiation is slowly leaking out the top, bottom, and sides. I assume the case keeps radiation off the hand that holds the case with the phone in it, which is great, but I do wonder about the stored radiation when, for example, I'm listening to a podcast with the case closed, then open it later.
A 2010 review stated that "The balance of experimental evidence does not support an effect of 'non-thermal' radiofrequency fields" on the permeability of the blood-brain barrier, but noted that research on low frequency effects and effects in humans was sparse.[4] A 2012 study of low-frequency radiation on humans found "no evidence for acute effects of short-term mobile phone radiation on cerebral blood flow".[5][6]
Once the surface is completely dry, the surface will have a visible residue remaining on the glass. Take the same microfiber and remove the residue by rubbing the surface until it is shiny and smear free. Do not use any other alcohol or cleaning agent on the glass and apply a new layer of the Ti22 Liquid Titanium Shield every 6-12 months depending on how heavy you use the phone or tablet.

According to Dr. Devra Davis, who wrote Disconnect: The Truth About Cell Phone Radiation, cell phones are dangerous because they emit erratic signals capable of disrupting resonance and DNA repair. As long as your cellular phone is on, it sends out radiation intermittently. Even if you don’t take your phone out of your pocket all day, it continues to expose you to radiation. Dr. Joseph Mercola, founder of Mercola.com recently wrote an excellent article on the dangers of cell phones and provided common sense ways we can protect ourselves and our family from the electromagnetic radiation it emits.
But the pair of studies by the US National Toxicology Program found “clear evidence” that exposure to radiation caused heart tumors in male rats, and found “some evidence” that it caused tumors in the brains of male rats. (Both are positive results; the NTP uses the labels “clear evidence,” “some evidence,” “equivocal evidence” and “no evidence” when making conclusions.)
As far as which of those match your device, that really depends on your carrier. AT&T, Verizon, Sprint, and T-Mobile all have different frequencies. To further complicate things, in one geographic region of the country they may use one frequency, while another is used elsewhere. It all depends on which FCC licenses they have the rights to in each region.
Disclaimer: The content of this website is based on research conducted by TTAC Publishing, LLC, unless otherwise noted. The information is presented for educational purposes only and is not intended to diagnose or prescribe for any medical or psychological condition, nor to prevent, treat, mitigate or cure such conditions. The information contained herein is not intended to replace a one-on-one relationship with a doctor or qualified healthcare professional. Therefore, this information is not intended as medical advice, but rather a sharing of knowledge and information based on research and experience. TTAC Publishing encourages you to make your own health care decisions based on your judgment and research in partnership with a qualified healthcare professional.

You are so correct Agogo. I purchased a Guass meter that measures EMF’s recently and the area where it shows the most waves and literally screams is when I move it close to the walls! The other place, believe it or not, is close to my electric clock in the bedroom. So, I move the clock away from the bed at night. And…I pull the plugs from the wall on my desk top computer at night also. Not much I can do about the walls except move my bed to the middle of the room…LOL

This site is for informational purposes only and is not intended as a substitute for advice from your physician. Foods and supplements discussed on this site are not intended to diagnose, treat, cure, or prevent any disease. You should consult with a physician before starting any diet, exercise or supplementation program, or if you have or suspect you might have a disease.
We used a few measuring devices to test and see if this product actually blocks radiation and RFID, including a very sophisticated EMF reader. I am glad to say that this is actually a very effective way to reduce radiation. It is most effective on the front side, and when you have it closed and latched, there is very little exposure - only along the top, side and bottom opening.
4. For the reasons mentioned in #3 above, an at-home meter test is extremely inaccurate and unreliable. That said, a far field RF meter such as the one you are using is highly influenced by ambient RF levels that exist almost everywhere. Again, we do not aim to eliminate the radiation from the device, nor from your surroundings, but our technology does deflect the radiation away from the body.
Another way to think about the situation is to consider the steady state power emission of .02 Watts and ask how long it would take to heat up your body by one degree Celsius if your entire volume was exposed. Take your body mass to be 100 kg and approximate it as being composed entirely of entirely of water. If all of the radiation was absorbed and went into heating you up (which it isn’t), it would take 20900000 seconds (specific heat*mass*1 degree/power) or 241 days to heat you up by one degree. Fortunately, you have metabolic processes in your body, or possibly air conditioning, to mitigate this heating.
You’ll notice radiation is split into two categories here: ionizing and non-ionizing. The waves emitted from radios, cellphones and cellphone towers, Wi-Fi routers, and microwaves are referred to as “radio-frequency” radiation. That’s a type of “non-ionizing” radiation, since it doesn’t carry enough energy to “ionize” — or strip electrons from atoms and molecules. (Other sources of non-ionizing radiation, as you can see in our chart, include visible and infrared light.)
That mystery probably stokes fears about cellphone radiation instead of soothing them, though — in part because of how we in the media cover the rare and frightening. We’ve seen the same thing with fear over nuclear power plants, according to a paper published in Science in the 1980s by psychologist Paul Slovic. “Because nuclear risks are perceived as unknown and potentially catastrophic, even small accidents will be highly publicized and may produce large ripple effects,” Slovic wrote.
Some people might consider choosing a phone with a low SAR value. Different models of phones can give off different levels of RF waves. But as noted above, according to the FCC the SAR value is not always a good indicator of a person’s exposure to RF waves during normal cell phone use. One way to get information on the SAR level for a specific phone model is to visit the phone maker’s website. The FCC has links to some of these sites here: www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellular-telephones. If you know the FCC identification (ID) number for a phone model (which can often be found somewhere on the phone or in the user manual), you can also go to the following web address: www.fcc.gov/oet/ea/fccid. On this page, you will see instructions for entering the FCC ID number.
EWG believes that cell phone testing procedures should include cases and other accessories, whether supplied by the phone manufacturer or a third party. Since these cases and accessories have no other use and have the potential to influence the phone’s transmitting and receiving activity and the amount of radiation that a user might encounter, they fall within FCC’s authority.
Once the surface is completely dry, the surface will have a visible residue remaining on the glass. Take the same microfiber and remove the residue by rubbing the surface until it is shiny and smear free. Do not use any other alcohol or cleaning agent on the glass and apply a new layer of the Ti22 Liquid Titanium Shield every 6-12 months depending on how heavy you use the phone or tablet.
SafeSleeve - Unlike the competition, SafeSleeve anti-radiation cases for cell phone integrate FCC accredited lab tested shielding technology that can block over 99% of RF radiation and over 92% of ELF radiation. 360 degree phone protection and built-in RFID blocking wallet comes standard and all products are backed by our 30-day, hassle-free return policy. Free expedited shipping in the US and discounted international rates. Click below to order today!
In conclusion: It is still unclear whether use of cellular technology is associated with an increased risk to develop malignant and benign tumors, but taking into account the results of recent studies, the Ministry of Health adopts the precautionary principle and follows the recommendations listed in the “Ministry of Health Recommendations” (below).
Manufacturers conduct government-required certification tests using a bare phone, set to transmit at maximum power, with no accessories. The recorded maximum SAR is reported to the FCC and listed in the phone’s manual. A phone tested with accessories under the same conditions can produce a higher SAR because the materials surrounding the antenna can affect the amount of radiation that reaches and is absorbed by the user’s body. A case can influence both the overall amount of emitted radiation and how it is directed.
Over time, the number of cell phone calls per day, the length of each call, and the amount of time people use cell phones have increased. Because of changes in cell phone technology and increases in the number of base stations for transmitting wireless signals, the exposure from cell phone use—power output—has changed, mostly lowered, in many regions of the United States (1).
×